Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
0.4” Triple Digits Display HNT4242B Harvatek International 0.4” Triple Digits Display HNT4242B Official Product HNT4242B Customer Part No. **************** **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. October. 5, 2010 Data Sheet No. HNT4242B Version of 1.1 Page 1/9 0.4” Triple Digits Display HNT4242B DISCLAIMER HARVATEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. HARVATEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY HARVATEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of HARVATEK or HARVATEK INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Orderable Information Official Product HNT4242B Customer Part No. **************** **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. October. 5, 2010 Data Sheet No. HNT4242B Version of 1.1 Page 2/9 0.4” Triple Digits Display HNT4242B H N T 4 Series Name 2 4 2 B Color Code HNT= 4242B= Harvatek Triple Display 0.4” Triple Digits Display, Red, Common Anode, Gray Face and White Segments. Official Product HNT4242B Customer Part No. **************** **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. October. 5, 2010 Data Sheet No. HNT4242B Version of 1.1 Page 3/9 0.4” Triple Digits Display HNT4242B Features: 0.4-inch (10.16 mm) Digit Height Continuous Uniform Segments Low Power Requirement Excellent Characters Appearance High Brightness & High Contrast Wide Viewing Angle Solid State Reliability Categorized for Luminous Intensity Lead-free Package RoHS compliant, Pb Free. 1. Dimensions in millimeter (inch) 2. Tolerance is ±0.25 (0.01”) specified 3. Pin tip’s shift tolerances is +/-0.4mm. Official Product HNT4242B Customer Part No. **************** **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. October. 5, 2010 Data Sheet No. HNT4242B Version of 1.1 Page 4/9 0.4” Triple Digits Display HNT4242B Absolute maximum Rating (@ 25 degree C) Parameter Symbol Spec Unit Power Dissipation per segment Pd 70 mW Reverse Voltage Per Segment Vr 5 V Forward Current Per Segment IF 25 mA Peak Current Per Segment IF (Peak) 90 mA Operating Temperature Range Topr -35 to + 85 °C Storage Temperature Range Tstg -35 to + 85 °C Soldering Conditions : Max 260℃ for max 3sec at 1.6mm below seating plane. Electrical and Optical Characteristic (@ 25 degree C) Parameter Symbol Test Condition Min. Typ. Max. Unit Forward voltage per dot VF IF=20mA 1.8 2.0 2.6 V Luminous intensity per dot IV IF=1mA 200 650 - ucd Peak Emission Wavelength p λ D IF=20mA - 650 - nm IF=20mA - 639 - nm △λ IF=20mA IR VR=5V - 20 - Iv-m IF=10mA Dominant wavelength Spectrum radiation bandwidth Reverse current Luminous Intensity Matching Ratio nm 100 μA 2:1 Luminous Intensity tolerance = +/- 20% Official Product HNT4242B Customer Part No. **************** **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. October. 5, 2010 Data Sheet No. HNT4242B Version of 1.1 Page 5/9 0.4” Triple Digits Display HNT4242B Schematic Drawing Official Product HNT4242B Customer Part No. **************** **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. October. 5, 2010 Data Sheet No. HNT4242B Version of 1.1 Page 6/9 0.4” Triple Digits Display HNT4242B TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) RELATIVE INTENTY VS WAVELENGT H Relaitive Radiant intensity 1.0 0.5 0 550 600 650 800 750 700 850 WAVELENGTH (nm) IF~ VF 100 Luminous Intensity Relative Value at L F=10mA 90 Forward Current L F(mA) IV ~ IF 5.0 80 70 60 50 40 30 20 10 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 0 5 Forward Voltage V F(V) 10 25 30 3.0 Relative Luminous Intensity Forward Current IF(mA) 20 IV~ Ta IF~Ta 50 40 30 20 10 0 15 Forward Current I F(mA) 0 40 20 60 80 100 Amblent Temperature Ta( °C) 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta( ℃ ) Official Product HNT4242B Customer Part No. **************** **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. October. 5, 2010 Data Sheet No. HNT4242B Version of 1.1 Page 7/9 0.4” Triple Digits Display HNT4242B Packing Flow: 16pcs/ Tube 1408pcs/ Inner Carton CUSTOMER: P/N:4004796 DEVICE NO LTC-2623G-01 BIN Q'TY 1440 TOTAL: 1440 PCS Q.C.STAMP: 5632pcs/ Outside Carton CUSTOMER: DEVICE NO LTC-2623G-01 BIN Q'TY 5760 TOTAL: 5760 PCS Q.C.STAMP: Official Product HNT4242B Customer Part No. **************** **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. October. 5, 2010 Data Sheet No. HNT4242B Version of 1.1 Page 8/9 0.4” Triple Digits Display HNT4242B SOLDERING IRON Basic spec is ≦4 sec when 260℃. If temperature is higher, time should be shorter (+10℃→1 sec). Power dissipation of Iron should be smaller than 15W, and temperature should be controllable. Surface temperature of the device should be under 230℃. REWORK Customer must finish rework within ≦4 sec under 245℃. Revision History Revision Page Initial Release stamp-off HNT4242B Update TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES & add Official Product 7,8 Version No. Revision Date 1.0 07-15-2010 1.1 10-05-2010 Packing Flow HNT4242B Customer Part No. **************** **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. October. 5, 2010 Data Sheet No. HNT4242B Version of 1.1 Page 9/9