Download Media Conversion Media Conversion

Product Families
Allied Telesis media converters
enable the connection of disparate
cabling types in networks where
many cabling types exist. Network
segments may also operate at
different speeds and media
converters can be used to
convert between one speed and
another.
Allied Telesis’ extensive line of media converters is designed to cater for the most
common network cabling interconnection needs. With devices for both unmanaged
and managed network environments, Allied Telesis solutions offer a simple, seamless
and practical solution to copper-fiber and network speed conversion.
Typically, media converters are used to connect copper and fiber-optic cabling
that coexist in a network. Converters exist in a variety of standalone, multi-port and
modular form factors.These different physical forms address the need for different
applications and conversion densities.
Media conversion solutions offer the ability to inexpensively:
n
Extend network distances by adding fiber only where it is required
n
Add new devices without replacing costly cable
n
Keep pace with changing technology
n
Provide an inter-connection between media types that is transparent to the network
n
Integrate high-bandwidth devices into the network
» Unmanaged
Copper Speed Fiber Speed
Standalone
Multi-channel
Modular
100
100
MC100 series
AT-MCF2000
ConverteonTM
1000
1000
MC1000 series
—
ConverteonTM
10/100
100
FS200 series
—
ConverteonTM
10/100/1000
1000
GS2000 series
—
ConverteonTM
Copper Speed Fiber Speed
Standalone
Multi-channel
Modular
100
100
Converteon
AT-MCF2000
ConverteonTM
1000
1000
ConverteonTM
—
ConverteonTM
10/100
100
ConverteonTM
—
ConverteonTM
10/100/1000
1000
ConverteonTM
—
ConverteonTM
» Managed
TM
Allied Telesis is the World’s largest
media converter manufacturer. Our vast
range of products provide connectivity
solutions for almost all the needs of
Carrier, Enterprise, and SMB customers.
140 | Media Conversion
Allied Telesis | 141
Media Conversion
Media Conversion
Media Conversion
Applications
SMB Network Extension
Legacy FDDI Upgrades
In this example, a small business is located on two floors.The main network switch
on the ground floor was originally purchased to provide only copper Gigabit
connections to the servers, and Fast Ethernet connections to the users.To allow
for new connections to the first floor, a fiber-optic cable has to be used in the dry
riser. The media converters provides the necessary copper to fiber conversion.
Legacy FDDI networks are based on multi-mode fiber. Typically these cables are
unable to carry standards-based Gigabit Ethernet more than 300m. However, by
using Allied Telesis’ Gigabit Extender, the multi-mode fiber cables can be re-used
to carry Gigabit Ethernet up to 2km.This can eliminate the considerable cost of
re-cabling with single-mode fiber.
Switch
Switch
Enterprise Network Building Interconnection
Distributed buildings in an office complex or campus environment are normally
interconnected using fiber-optic cables. Individual floors in buildings may also
utilize fiber connections in the risers. Buildings that have limited fiber ports on
the main distribution switch require media converters to enhance the number
of fiber connections that can be made to it.
L
142 | Media Conversion
Allied Telesis | 143
Media Conversion
Media Conversion
Applications
Product Features
Hospitality/Dormitories
Media converters have no MAC or IP address and are normally intended to be
transparent to the network they help interconnect. A growing need for troubleshooting, resiliency and network management has resulted in product features and
capabilities that make them more visible and effective:
Most hotel rooms and student dormitories, for example, have telephone connectivity
to each room. Unfortunately, unless the buildings were constructed recently, many do
not have any Ethernet cabling installed. Allied Telesis VDSL media converters allow the
existing installed cable to carry telephony traffic, and also carry new high-speed
Internet access.This can eliminate the considerable cost of re-cabling the building.
n
MissingLinkTM
n
Smart MissingLink
TM
n
Auto MDI/MDI-X
n
Redundancy
n
IEEE 802.11ah OAM
MissingLinkTM
Fast Ethernet Switch
Allied Telesis’ MissingLinkTM feature enables a media converter to pass the link status of
their connections and thereby trigger corrective action when a problem on a link is
detected.
For example, if the twisted pair cable to the 10/100TX port on an Allied Telesis media
converter were to fail, the unit would respond by dropping the link on the 100FX fiberoptic port. In doing so, the media converter notifies the device to which it is attached
that the connection on its twisted pair port has been lost. If the failure had started with
the fiber-optic cabling, the unit would drop the link to the twisted pair port.
Most managed devices, such as switches and routers, can be configured to take a
specific recovery action in the event of the loss of connection on a port. In some
cases, the unit can be configured to seek a redundant path to a disconnected endnode or send out a trap to a network management station, and so alert the network
administrator of the problem.
Fiber-To-The-Home (FTTH)
The majority of new broadband access networks use Ethernet/IP to deliver converged
voice, video and data services to business and residential users. Depending on the
nature of the FTTH deployment, network operators may seek to deploy either a
specialist access platform or a mixture of switches and media converters. Depending
on the type of multiservice gateway deployed, media converters may be used both at
the CO/remote and the customer residence.
144 | Media Conversion
Allied Telesis 145
Media Conversion
Media Conversion
Applications
Smart MissingLinkTM
Redundancy
The Smart MissingLinkTM feature performs the same function as MissingLinkTM with
the addition that the LINK LED indicators show exactly which link has been broken.
A flashing LINK LED shows which port is still operational, whilst a non-lit LINK LED
shows which port has failed. For example, on a UTP to fiber media converter, if
the network twisted pair cable to the 10/100TX port were to fail, the LINK LED on
the 100FX fiber-optic port will blink, indicating a failed connection on the twisted
pair port. If the failure was with the fiber-optic cabling, the LINK LED on the twisted
pair port would blink.This type of network monitoring and fault notification enables
network administrators to quickly see which port has failed and troubleshoot
accordingly.
In many cases, Allied Telesis media converters are critical components in a network
carrying data between sites over long distances. It is imperative that all efforts are
taken to ensure reliability of the network, and thus network design with redundancy
is mandatory. The components most likely to fail are the power supplies.The majority
of Allied Telesis media converters can be deployed with hotswappable, hot removable
power supplies to ensure maximum uptime.
Chassis
Redundant Features
Description
AT-MCR12
Dual hot-swap power supplies
12 slot unmanaged chassis for standalone
media converters
Auto MDI/MDI-X
AT-MCF2000
Dual hot-swap power supplies
2 slot multi-port blade chassis
Twisted pair cables use two wires to carry data in one direction, and two wires
to carry data in the reverse direction. Older generation Ethernet data ports can
normally be configured by a push button or slide switch to allow them to transmit
data on one pair, and receive on the other pair (MDI mode), or receive on the first
pair and transmit on the second (MDI-X mode).To make installation simpler for
the network installer, newer products support Auto MDI/MDI-X mode, allowing any
Ethernet cable to be connected, irrespective of polarity, and the media converter
will automatically adjust itself to provide a valid connection.
Converteon
Dual hot-swap power supplies
Dual hot-swap management module
Dual hot-swap fan module
18 slot modular chassis
TM
IEEE 802.11ah Ethernet-in-First-Mile
As Ethernet moves from being an Enterprise-centric technology into a Carrier
WAN and access technology, network designers need to have carrier-class capabilities
in their Ethernet designs. IEEE 802.3ah Ethernet-in-First-Mile implements a set of
Operational, Administration and Maintenance (OAM) capabilities for Ethernet links.
These capabilities ensure backward compatibility with existing Ethernet
implementations, while still providing advanced monitoring functionality required in
public networks.
See page 135.
146 | Media Conversion
Allied Telesis | 147
Media Conversion
Media Conversion
Product Features
Mounting Options
Fiber Connectors
Media converters can be mounted in a number of ways to suit the installation.
Allied Telesis supports one of the major industry standards for fiber connectors:
Desktop
All Allied Telesis media converters have the option to be fitted with rubber feet.
These allow the product to be desktop mounted.
Fiber Connector Type
Description
LC
Primarily used for Gigabit on modular SFP
SC
Primarily used for Fast Ethernet and Gigabit
Rack
ST
Primarily used for Ethernet and Fast Ethernet
All the larger multi-channel and modular media converters ship with 19” rack-mount kits
as standard. Smaller media converters may also be rack-mounted in a number of ways.
Fiber Cables
The choice of fiber cable type is normally dictated by the distance that the network
needs to be extended, and the speed of the data.There are two types of cable,
multi-mode and single-mode.
Speed
Max Distance Multi-mode
Max Distance Single-mode
Ethernet (10Mbps)
2km
70km
Fast Ethernet (100Mbps)
2km
70km
Gigabit Ethernet (1000Mbps) 300m
80km
10G Ethernet (10Gbps)
80km
—
Most Enterprise networks use two fiber-optic cables, one for transmit and one for
receive data. However, many Telco customers use single bi-direction transmission,
using one single-mode fiber to carry one wavelength (color) in one direction and
another wavelength in the reverse direction.This halves the cost of fiber deployment.
This technique is occasionally used by Enterprise customers, especially in installations
where fiber availability is limited.
AT-MCR1 Chassis
This small chassis can be rack-mounted, and allows a single standalone media
converter, or two port switch, to be powered by an internal power supply.
AT-MCR12 Chassis
This chassis allows up to 12 standalone media converters or switches to be
mounted in a chassis.The chassis supports optional redundant power supplies,
and can be AC or DC powered.
AT-Tray 1 and AT-Tray 4
These simple trays allow either one, or up to four standalone media converters
to be mounted into a rack.
Wall
A standalone media converter or switch can be easily mounted on a wall, or under
a table using the AT-WLMT wall-mount fixture.
148 | Media Conversion
Allied Telesis | 149
Media Conversion
Media Conversion
Fiber Cable and Connector Types
» Standalone/Rack-mountable & Wall-mounted Media Converters
» ConverteonTM
Distance
AT-MCR12 Page
Compatible No.
1000SX/SC x 1 port multi-mode
Ext. SC x 1 port
2km
N
156
AT-MC1004
1000T to 1000SX (SC multi-mode)
220-550m
Y
157
AT-MC1008/GB
1000T to GBIC pluggable
Dependent
on GBIC
Y
157
AT-MC1008/SP
1000T to 1000X SFP pluggable
Dependent
on SFP
Y
157
AT-MC104XL
100FX (SC multi-mode) to
100FX (SC single-mode)
15km
Y
-
AT-MC104LH
100FX (SC multi-mode) to
100FX (SC single-mode long-haul)
40km
Y
-
AT-MC115XL
10/100TX to 10FL/100SX
(ST multi-mode 850nm)
300m
Y
-
AT-MC116XL
10/100TX to 10FL/100SX
(SC multi-mode 850nm)
300m
Y
-
Gigabit Ethernet speed/media conversion blades
Distance
Page
No.
Gigabit Ethernet
10/100/1000Mbps copper to SFP
with IEEE 802.3ah OAM
Dependent on SFP
154
1000Mbps fiber multi-mode extender
AT-EX1002
1000Mbps copper to fiber multi-mode
1000Mbps copper to pluggable optics
AT-CM2K0S
10/100/1000T to 1000X SFP
Gigabit Ethernet media conversion blades
10/100/1000Mbps fiber SFP to SFP
AT-CV1KSS
1000X SFP to 1000X SFP
Dependent on SFP
154
2km
154
15km
154
Fast Ethernet speed/media conversion switching blades
10/100Mbps copper to 100Mbps
fiber multi-mode with IEEE 802.3ah OAM
AT-CM202
10/100TX to 100FX (SC multi-mode)
Fast Ethernet
10/100Mbps copper to 100Mbps
fiber single-mode with IEEE 802.3ah OAM
AT-CM202/1 10/100TX to 100FX (SC single-mode)
100Mbps fiber multi-mode to single-mode
AT-CM202/2 10/100TX to 100FX (SC single-mode)
40km
154
AT-CM212A/1 10/100TX to 100FX (SC single-mode)
15km
(TX = 1310nm)
154
AT-CM212B/1 10/100TX to 100FX (SC single-mode)
15km
(TX = 1550nm)
154
100Mbps copper to fiber multi-mode
Fast Ethernet media conversion blades
100Mbps copper to fiber multi-mode
AT-CV102
100TX to 100FX (SC multi-mode)
2km
154
AT-MC101XL
100TX to 100FX (ST multi-mode)
2km
Y
157
100Mbps copper to fiber single-mode
AT-CV102/1
100TX to 100FX (SC single-mode)
15km
154
AT-MC102XL
100TX to 100FX (SC multi-mode)
2km
Y
157
100Mbps copper to fiber single-mode
AT-CV102/2
100TX to 100FX (SC single-mode)
40m
154
AT-MC103XL
100TX to 100FX (SC single-mode)
15km
Y
-
AT-MC103LH
100TX to 100FX
(SC single-mode long-haul)
40km
Y
-
AT-MC13
10T to 10FL (ST multi-mode)
2km
Y
-
AT-MC14
10T to 10FL (SC multi-mode)
2km
Y
-
100Mbps copper to fiber single-mode
Wide Area Network conversion blades
4 x T1/E1 + 10/100Mbps Ethernet to fiber SFP
AT-CM70S
4 x RJ-45 (E1/T1) +
10/100TX to 100Mbps SFP
Dependant on SFP
154
Dependant on SFP
154
Serial communication conversion blades
RS232/RS422/RS485 to fiber SFP
AT-CM81S
RS232 to 100Mbps SFP
Ethernet
10Mbps copper to fiber multi-mode
NOTE - The media conversion blades listed above are designed to be used with/in the AT-CV1000, 1200 and 5000, manageable rack-mount chassis’. pg 153
See page 11.
150 | Media Conversion
Allied Telesis | 151
Media Conversion
Media Conversion
Media Conversion Selector
Products
» Standalone Speed/Media Converting Switches
Converteon™
Gigabit Ethernet
10/100/1000Mbps copper to fiber SFP
Distance
AT-MCR12 Page
Compatible No.
Dependent
on SFP
Y
158
AT-GS2002/SP
10/100/1000T to 1000X SFP
AT-FS201
10/100TX to 100FX (ST multi-mode) 2km
Y
158
AT-FS202
10/100TX to 100FX (SC multi-mode) 2km
Y
158
AT-FS232
10/100TX to 100FX (SC multi-mode) 2km
Y
158
AT-FS232/1
10/100TX to 100FX (SC)
15km
Y
158
AT-FS232/2
10/100TX to 100FX (SC single-mode) 40km
Y
158
AT-FS237S13/1
10/100TX to 100FX (SC single-mode) 15km
Y
158
AT-FS238A/1 B/1 10/100TX to 100FX (SC single-mode) 15km
Y
158
AT-FS238A/2 B/2 10/100TX to 100FX (SC single-mode) 40km
Y
158
Fast Ethernet
10/100Mbps copper to fiber multi-mode
10/100Mbps copper to fiber single-mode
10/100Mbps copper to fiber single-mode
Managed Media Conversion System
The Converteon™ family provides the next-generation of managed media
conversion. Expandable from a single unit to a modular 18 slot chassis, Converteon™
provides Fast Ethernet and Gigabit rate media conversion with expansion capabilities
for other protocols in the future. Current support for IEEE 802.3ah EFM makes
Converteon™ ideal for both service providers and enterprise.
AT-CV5000
18 slot rack-mount chassis
Features
n Intermixable redundant AC-DC chassis
n Optional Telnet and SNMP
management
n Hotswappable blades
n Field serviceable power supplies
and fans
AT-CV1000
1 slot standalone chassis
NOTE - The media conversion blade listed above is designed to be used with/in the AT-MCF2000 rack-mount chassis. pg 159
Telnet and SNMP management
module and redundant power
modules: Converteon™ AT-CV5000
Feature
n External AC power adapter
» Network Extender
AT-CV5M01
RS232 x 1 port, 10/100TX x 1 port
Accessories: Converteon™
AT-CV1200 and AT-CV1000
AT-CVFAN
Fan tray
AT-CVMNT12
Wall-mounting bracket for AT-CV1200
AT-PWR14
Redundant AC power supply option
AT-CVMCR
Mounting kit allowing the AT-CV1000 to
be mounted into the AT-MCR12 chassis
» Multi-channel Media Converters
Distance
Page
No.
2km
159
Fast Ethernet
12 port 100Mbps copper to fiber multi-mode blade
AT-MCF2012LC
100TX x 12 ports to
100FX x 12 ports (MT)
AT-MCR12 Page
Compatible No.
Single port VDSL
10/100Mbps copper to VDSL
AT-MC601
10/100TX to VDSL subscriber
Y
160
AT-MC602
10/100TX to VDSL provider
Y
160
AT-PWR15
-48vDC power supply option
» Gigabit Ethernet Passive Optical Network (GEPON)
152 | Media Conversion
AT-CV1200
2 slot standalone chassis
AT-MCR12 Page
Compatible No.
Single port GEPON ONU
10/100/1000Mbps copper to GEPON fiber
Feature
n External AC power adapter
AT-ON1000
10/100/1000T to PX20 fiber, subscriber
Y
160
Model
Dimensions
Weight
AT-CV1000
2.5cm x 17.8cm x 10.4cm
.46kg
AT-CV1200
2.5cm x 17.8cm x 10.4cm
.46kg
AT-CV5000
44cm x 34.25cm x 8.68cm
6.12kg
Allied Telesis | 153
Media Conversion
Media Conversion
Media Conversion Selector
Products
Blades
AT-MCR12
12 Slot Media Conversion Rack-mount Chassis
Gigabit Ethernet Media
Conversion Blade
Gigabit Ethernet Speed/Media
Conversion Switching Blade
AT-CV1KSS
SFP to SFP, dependent on SFP
AT-CM2K0S
10/100/1000T to 1000X SFP
with IEEE 802.3ah OAM, dependent
on SFP
Fast Ethernet Media Conversion
Blades
n
12 slot rack-mount chassis
n
AT-CV102
100TX to 100FX (SC multi-mode), 2km
Fast Ethernet Speed/Media
Conversion Switching Blades
AT-CV102/1
100TX to 100FX (SC single-mode),
15km
AT-CM202
10/100TX to 100FX (SC multi-mode)
with IEEE 802.3ah OAM, 2km
AT-CV102/2
100TX to 100FX (SC single-mode),
40km
AT-CM202/1
10/100TX to 100FX (SC single-mode)
with IEEE 802.3ah OAM, 15km
Wide Area Network Conversion
Blades
AT-CM202/2
10/100TX to 100FX (SC single-mode)
with IEEE 802.3ah OAM, 40km
n
AT-CM70S
4 x E1/T1 + 10/100TX to 100Mbps SFP
AT-CM212A/1
10/100TX to 100FX (SC single fiber,
single-mode bi-directional) with
IEEE 802.3ah OAM, 15km (1310 nm TX)
Serial Conversion Blades
AT-CM212B/1
10/100TX to 100FX (SC single fiber,
single-mode bi-directional) with
IEEE 802.3ah OAM, 15km (1550 nm TX)
AT-CM81S
RS232/ RS422/ RS485 to 100Mbps SFP
Features
n Holds up to 12 Allied Telesis standalone
media converters or switches
n
10Mbps, 100Mbps and 1000Mbps
media converters and 2 x port switches,
can be mounted in any combination
Optional redundant hotswappable
power supply
AC or -48vDC power options
Fits into a standard 19” network
rack
Redundant power modules:
AT-MCR12
AT-PWR4
AC power supply
AT-PWR9
-48vDC power supply
See page 132.
154 | Media Conversion
Model
Dimensions
Weight
Blades
20cm x 10cm x 2.3cm
.14kg
Model
Dimensions
Weight
AT-CM70S
20cm x 10cm x 46cm
.28kg
AT-MCR12
44cm x 22cm x 13cm
9.5kg
Allied Telesis | 155
Media Conversion
Media Conversion
Products
Products
Standalone/Rack-mountable Media Converters
MC1000, MC100 & MC10 Series
Standalone Media Converters
AT-EX1002
These popular standalone media converters convert Ethernet, Fast Ethernet or
Gigabit Ethernet copper to a choice of fiber.
Multi-mode Gigabit Extender
The AT-EX1002 allows Gigabit to be transported over existing multi-mode fiber at
distances up to 2km. Ideal for customers upgrading Fast Ethernet or FDDI networks,
where single-mode fiber installation is cost prohibited.
MC1000 Series
Popular products
Gigabit Standalone
Media Converters
For the complete portfolio, please refer to the
Selector on pg 151.
Features
n Extends Gigabit Ethernet to 2km
on multi-mode fiber
1000SX/SC to multi-mode extension
SC, 2km
n
n
Gigabit deployment over legacy Fast
Ethernet and FDDI multi-mode cable
Must be used in pairs, one at each
end of the fiber cable
AT-MC1004
1000T to 1000SX (SC multi-mode),
220-550m
MC100 Series
Fast Ethernet Standalone
Media Converters
AT-MC1008/GB
1000T to 1000X GBIC pluggable,
dependent on GBIC
AT-MC1008/SP
1000T to 1000X SFP pluggable,
dependent on SFP
AT-MC101XL
100TX to 100FX (ST multi-mode), 2km
AT-MC102XL
100TX to 100FX (SC multi-mode), 2km
MC10 Series
Ethernet Standalone
Media Converters
Common features:
MC1000, MC100 and MC10 series
n Support for multi-mode and single-mode
fiber
See pages 116.
156 | Media Conversion
Model
Dimensions
Weight
MC10 series
10cm x 9.5cm x 2.5cm
.3kg
Model
Dimensions
Weight
MC100 series
10cm x 9.5cm x 2.5cm
.3kg
AT-EX1002
20cm x 16cm x 3.8cm
1.3kg
MC1000 series
10cm x 9.5cm x 2.5cm
.3kg
n
Fits the AT-MCR12 rack-mount chassis
n
Half and full-duplex operation
n
Transparent to IEEE 802.1Q packets
Allied Telesis | 157
Media Conversion
Media Conversion
Products
Products
Standalone Speed/Media Converting Switches
Multi-channel Media Converters
FS200 Series
GS2000 Series
AT-MCF2000
Fast Ethernet
Speed/Media Converters
Gigabit Ethernet
Speed/Media Converters
Multi-channel Media Converter
AT-FS201
10/100TX to 100FX (ST multi-mode),
2km
AT-GS2002/SP
10/100/1000T to SFP pluggable,
dependent on SFP
AT-FS202
10/100TX to 100FX (SC multi-mode),
2km
AT-FS232
10/100TX to 100FX (SC multi-mode),
2km
AT-FS232/1
10/100TX to 100FX (SC single-mode),
15km
AT-FS232/2
10/100TX to 100FX (SC single-mode),
40km
The AT-MCF2000 provides ultra high-density, modular, multi-channel media
convertion, with high availability and is ideal for fiber deployments.The units can be
used unmanaged, or SNMP managed with the installation of the optional
management module.
Features
n Small, 1RU chassis
n
n
Common features:
FS200 and GS2000 series
n Convert speed as well as media type
n
Store-and-Forward switching mode
n
n
Transparent to IEEE 802.1Q packets
n
Support for MissingLinkTM and
Smart MissingLinkTM
Redundant power modules:
AT-MCF2000
MissingLink support
TM
AT-MCF2000AC
Redundant AC power supply module
(optional)
AT-MCF2000DC
DC power supply module
AT-FS238A/1
10/100TX to 100FX (SC single-mode,
bi-directional), 15km
Extended temperature operation
TX = 1310nm RX = 1550nm
158 | Media Conversion
Resilient power supply modules
Auto MDI/MDI-X crossover
AT-FS237S13/1
10/100TX to 100FX (SC single-mode,
bi-directional), 15km,TX/RX @ 1310nm
Extended temperature operation
AT-FS238B/1
10/100TX to 100FX (SC single-mode,
bi-directional), 15km
Extended temperature operation
RX = 1310nm TX = 1550nm
Hotswappable power supply modules
n
Fits the AT-MCR12 rack-mount chassis
(AT-GS2002)
Hotswappable media blades
(max of two)
n
n
n
High-density conversion, with up to
24 Fast Ethernet channels
AT-MCF2000M
Management module (optional)
AT-MCF2012LC
12 channel 100TX to 100FX
(LC, multi-mode), 2km
Model
Dimensions
Weight
FS200 series
10cm x 9.5cm x 2.5cm
.3kg
FS230 series
10cm x 9.5cm x 2.5cm
.3kg
Model
Dimensions
Weight
GS2002 series
10cm x 9.5cm x 2.5cm
.3kg
MCF2000 series
46cm x 44cm x 4.4cm
8.5kg
Allied Telesis | 159
Media Conversion
Media Conversion
Products
Media Conversion
Products
Network Extenders
These media converters allow Ethernet or Fast Ethernet to be transported
simultaneously with voice over the existing telephone cable. Ideal for network
deployment of hotels, offices etc, where either additional cables cannot be installed or
is cost prohibited.
MC600 Series
Fast Ethernet VDSL Media Converters
Common features: MC600 series
n Supports data and telephone voice
connection over twisted pair cable
n
AT-MC601
10/100TX to VDSL
Subscriber unit
AT-MC602
10/100TX to VDSL
Provider unit
n
Selectable data rates up to 11Mbps
full-duplex, symmetrical operation
Up to 25Mbps downstream in
asymmetrical operation
n
Integrated POTS splitter
n
GUI-based configuration
Gigabit Ethernet Passive Optical Network (GEPON)
This media converter allows Ethernet, Fast Ethernet or Gigabit Ethernet to be
transported over a fiber Passive.
AT-ON1000
Gigabit Ethernet GEPON Converter
Features
n
Supports up to 20km fiber distances
n
In-band IEEE 802.3ah OAM management
n
10/100/1000TX to PX20 fiber
Subscriber unit
160 | Media Conversion
Managed and configured by iMAP and
NMS (see page 18 and 28)
Model
Dimensions
Weight
MC600 series/
AT-ON10000
10cm x 9.5cm x 2.5cm
.3kg