Download Overview Sequential Confirmation 2 Non

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Resistor wikipedia , lookup

Microwave wikipedia , lookup

Microwave transmission wikipedia , lookup

Transcript
®
2 Non-Overlapping Detectors in 1
Sequential Confirmation
TWO MOVEMENT DETECTOR
“OUTSTANDING PERFORMANCE
OPTIMUM RELIABILITY”
15m Vertical Coverage
Overview
PIR
The TMD 15® is a unique product boasting 2 non-overlapping detectors; a PIR and a dual
technology in 1 robust housing. Based on Pyronix’ tried and tested patented technologies which
has been proven over the last 20 years coupled with innovative features, the TMD 15® is ideal for
use on new systems or for retro fits upgrading to PD 6662 / EN 50131-1 Grade 3 & TS 50131-2-4.
The TMD 15® offers you outstanding detection performance with optimum reliability designed to
meet the latest industry regulations.
• 15m Volumetric PIRs
• Anti Block technology (patent pending)
•
1-15m
Adjustable
Microwave
• Selectable EOL (End of Line) Resistors
Lens Facets
• Ability to operate as TMD (Two Movement • 4 LED indications
PIR and Microwave
Detectors) or TriCover®
• Low power consumption
Volumetric
90°
• Interdigitated fields of view (Patent pending)
• Remote LED Enable
30 Zone edges
3 Planes
• Unique Patented Anti Masking detection
• Active Self Test
www.pyronix.com
PIR
• Ability to detect masking of either
PIR
or
• Low Voltage Fault Detect
[email protected]
Volumetric
© 2009 Pyronix
Ltd. Pyronix and the Pyronix Blades device are all trademarks of Pyronix Ltd.
Microwave
69.3°
01709 700100
As part of our
continued development programme specifications of the KX range may change.
24 Zone edges
3 Planes
Patented Anti Masking Technology
Key
UN
IQ
UE
RMKT070006-3
15m Vertical Coverage
www.pyronix.com
Pyronix’ patented technology
offer
[email protected]
=Ltd.
PIR
andthe Pyronix Blades device, TMD15
= PIR
© 2009 Pyronix
Pyronix,
and TriCover are all trademarks of Pyronix Ltd.
01709 700100
UK Registered Design.
As part of our continued development programme specifications may change.
the ultimate in masking detection. Unlike
Microwave
15m Horizontal Coverage
RMKT080064-4
other detectors on the market, there is mask
protection on both the PIR and Microwave.
No matter what substance is used to mask;
www.pyronix.com
paper, sprays, lacquers, cellotape, cardboard
[email protected]
© 2009 Pyronix Ltd. Pyronix and the Pyronix Blades device are trademarks of Pyronixboxes,
Ltd.
once the protective microwave anti
01709 700100
As part of our continued development programme specifications of the V2 TEL and V2 GSM may change.
mask bubble has been breeched and either
RMKT090057-1
technologyLens
masked,
the TMD 15® will go into a
Facets
mask condition.
UE
PIR and Microwave
Volumetric
90°
30 Zone edges
3 Planes
Anti Blocking Technology (patent pending)
UN
IQ
PIR
Volumetric
69.3°
24 Zone edges
This
3 Planes
high security mode provides
blocking detection in day mode, providing
www.pyronix.com
© 2008 Pyronix Ltd. Pyronix, the Pyronix Blades device, Deltabell & Deltabell PLUS are all trademarks of Pyronix Ltd.
[email protected]
the ultimate protection against accidental
or
UK Registered Design. As part of our continued development programme specifications may change. Other cover colour
options available. White cover recommended for use with backlit Deltabell PLUS for optimum visual clarity.
01709 700100
deliberate blocking.
RMKT090001-4
TS 50131-2-4
EN 50131-1
PD 6662:2004
Security Grade 3
Environmental Class 2
Scenario 1
The Detectors field of view is clear, the panel
can be armed.
Scenario 2
The detectors field of view is blocked, the
panel cannot be armed until the blockage is
removed.
Scenario 1
Scenario 2
®
UN
IQ
UE
2 Non-Overlapping Detectors in 1
Sequential Confirmation
Simple to Install
LED Indications
Ideal when walk testing or in the event of an alarm
activation, the quad LED indication provides an
indication of all technologies and detectors.
DD 243:2004
The 2 detectors within the TMD 15® are
non-overlapping and have separate relay
outputs. These outputs signal independently
to the control panel and consequently the
ARC (Alarm Receiving Centre) in the event
of an activation. The TMD 15® enables
a cost effective and efficient sequential
confirmation system.
Push Connectors
Rather than having to use a screwdriver on the
terminal blocks, simply use the push connectors
which will firmly hold the wires in place. Again,
minimising installation time and enabling you to
make savings.
Selectable EOL (End of Line) Resistors
Minimises installation time enabling cost and time
savings by simple selection of end of line resistor
TS 50131-2-4 / EN 50131-1 /
PD 6662:2004
values for the alarm, tamper &
fault / mask outputs.
Foam Gasket Sealed Optics
The TMD 15® boasts an anti-masking
feature, where PIR and Microwave are both
anti-mask protected. This means that the
TMD 15® is suitable for use in high risk
environments and for use in TS 50131-2-4 /
EN 50131-1 / PD 6662 Grade 3 systems.
Forms a sealed area between the sensing element
and lens, stopping air flow and insect infestations in
the optics, reducing the potential risk of false alarm
activations.
TMD Printed Circuit Board
Connection Terminals
Alarm 1 LEDs
Tamper Resistor Headers
Alarm Resistor Headers
Alarm PIR 1
Mask/Fault Resistor Headers
Dip switches
Microwave
Mask potentiometer
Microwave Range Potentiometer
Tamper Resistor Headers
Alarm PIR 2
Alarm Resistor Headers
© 2009 Pyronix Ltd. Pyronix and the Pyronix Blades device are all trademarks of Pyronix Ltd.
As part of our continued development programme specifications of the KX range may change.
Tamper Switch (and
one on back of PCB)
Alarm 2 LED
© 2009 Pyronix Ltd. Pyronix, the Pyronix Blades device, TMD15 and TriCover are all trademarks of Pyronix Ltd.
UK Registered Design. As part of our continued development programme specifications may change.
www.pyronix.com
[email protected]
01709 700100
RMKT070006-3
www.pyronix.com
[email protected]
01709 700100
RMKT080064-4