Download Orthographic and Isometric Views

Geometry
HS Mathematics
Unit: 09 Lesson: 01
Orthographic and Isometric Views
1. Use cubes to build two different models that have the following front, top, and left side views as
shown below. The views given below are called orthographic views.
Front
Top
Left Side
Complete the table below of each of your models as viewed from above the left front corner.
This view which allows three faces of the model to be seen is called an isometric view.
Drawing of
Three-Dimensional Model
(as viewed from above the left front
corner)
©2012, TESCCC
Surface Area
(square units)
04/11/13
Volume
(cubic units)
page 1 of 3
Geometry
HS Mathematics
Unit: 09 Lesson: 01
Orthographic and Isometric Views
2. Build a model of the isometric figure below using cubes. Use the figure to sketch each of the
orthographic views listed in the table.
back
right side
left side
front
Front
Top
Surface area _______________
Left
Right
Volume _______________
3. Build a model of the isometric figure below using cubes. Use the figure to sketch each of the
orthographic views listed in the table.
front
Front
Top
Surface area _______________
©2012, TESCCC
Left
Right
Volume _______________
04/11/13
page 2 of 3
Geometry
HS Mathematics
Unit: 09 Lesson: 01
Orthographic and Isometric Views
4. Build a model of the isometric figure below using cubes. Use the figure to sketch each of the
orthographic views listed in the table.
back
right side
front
left side
Front
Top
Surface area _______________
©2012, TESCCC
Left
Right
Volume _______________
04/11/13
page 3 of 3