Download Uniform Circular Motion

Document related concepts
no text concepts found
Transcript
Uniform Circular Motion
Uniform circular motion is the
motion of an object traveling at a
constant (uniform) speed on a
circular path.
r
Period T is the time required to
travel once around the circle, that
is, to make one complete
revolution.
1
Example 1: A Tire-Balancing
Machine
The wheel of a car has a radius of r = 0.29m and is
being rotated at 830 revolutions per minute (rpm)
on a tire-balancing machine. Determine the speed
(in m/s) at which the outer edge of the wheel is
moving.
The speed v can be obtained directly from
but first the period T is needed. It must be
expressed in seconds.
,
2
830 revolutions in one minute
T=1.2*10-3 min, which corresponds to 0.072s
3
Uniform circular motion emphasizes that
1. Acceleration is a vector, which means it has
magnitude and direction.
2. The speed, or the magnitude of the velocity
vector, is constant.
3. Direction of the vector is not constant.
4. Change in direction, means
acceleration
5. “Centripetal acceleration” , it points toward
the center of the circle.
4
Centripetal Acceleration
Magnitude ac of the centripetal acceleration
depends on the speed v of the object and the
radius r of the circular path. ac=v2/r
5
Conceptual Example 2: Which
way will the object go?
An object on a guideline is in
uniform circular motion. The
object is symbolized by a dot,
and at point O it is release
suddenly from its circular
path.
If the guideline is cut suddenly, will the object move along
OA or OP ?
6
In the absence of a net force the object would
continue to move at a constant speed along a
straight line in the direction it had at the time
of release.
As a result, the object would move along the
straight line between points O and A, not on
the circular arc between points O and P.
7
Example 3: The Effect of Radius on
Centripetal Acceleration
The bobsled track at the 1994
Olympics in Lillehammer,
Norway, contained turns with
radii of 33 m and 24 m, as the
figure illustrates. Find the
centripetal acceleration at each
turn for a speed of 34 m/s, a
speed that was achieved in the
two-man event.
8
using the equation ac=v2/r
Radius=33m
Radius=24m
9
Check your understanding 1
The car in the drawing is moving clockwise around a
circular section of road at a constant speed. What are the
directions of its velocity and acceleration at (a) position 1
and (b) position 2?
10
(a) The velocity is due south, and the acceleration
is due west.
(b) The velocity is due west, and the acceleration
is due north.
11
Conceptual Example 6: A
Trapeze Act
In a circus, a man hangs
upside down from a trapeze,
legs bent over the bar and
arms downward, holding his
partner. Is it harder for the
man to hold his partner
when the partner hangs
straight down and is
stationary or when the
partner is swinging through
the straight-down position?
12
Reasoning and Solution: When the man and his
partner are stationary, the man’s arms must
support his partner’s weight. When the two are
swinging, however, the man’s arms must do an
additional job. Then the partner is moving on a
circular arc and has a centripetal acceleration. The
man’s arms must exert and additional pull so that
there will be sufficient centripetal force to produce
this acceleration.
Because of the additional pull, it is harder for the
man to hold his partner while swinging than while
stationary.
13
Example 7: Centripetal Force and
Safe Driving
Compare the maximum
speeds at which a car can
safely negotiate an
unbanked turn (r= 50.0m)
--dry = 0.9
--icy = 0.1
N
FS
FS
mg
14
N
fS
The car does not accelerate ,
FN – mg = 0
mg
FN = mg.
15
Dry road (
Icy road (
=0.900)
=0.100)
As expected, the dry road allows the greater
maximum speed.
16
Upward on the wing surfaces with a net lifting force L, the
plane is banked at an angle , a component L sin of the
lifting force is directed toward the center of the turn.
Greater speeds and/or tighter turns require greater
centripetal forces. Banking into a turn also has an application
in the construction of high-speed roadways.
17
Check your understanding 2
A car is traveling in uniform circular motion on a
section of road whose radius is r. The road is
slippery, and the car is just on the verge of sliding.
(a) If the car’s speed was doubled, what would have
to be the smallest radius in order that the car does
not slide? Express your answer in terms of r.
(b)What would be your answer to part (a) if the car
were replaced by one that weighted twice as
much?
18
(a) 4r
(b) 4r
19
Banked Curves
20
A car is going around a friction-free banked
curve. The radius of the curve is r.
FN sin
that points toward the center C
FN cos and, since the car does not accelerate in the
vertical direction, this component must balance the
weight mg of the car.
21
At a speed that is too small for a given , a car
would slide down a frictionless banked curve: at
a speed that is too large, a car would slide off the
top.
22
Example 8:The Daytona 500
The Daytona 500 is the major event of the
NASCAR (National Association for Stock Car
Auto Racing) season. It is held at the Daytona
International Speedway in Daytona, Florida. The
turns in this oval track have a maximum
radius(at the top)of r=316m and are banked
steeply, with
. Suppose these maximumradius turns were frictionless. At what speed
would the cars have to travel around them?
23
From Equation 5.4, it follows that
(96 mph)
Drivers actually negotiate the turns at speeds up to
195 mph, however, which requires a greater
centripetal force than that implied by Equation 5.4
for frictionless turns.
24
Satellites in Circular Orbits
25
If the satellite is to remain in an orbit of radius r,
the speed must have precisely this value.
The closer the satellite is to the earth, the smaller
is the value for r and the greater the orbital speed
must be.
Mass m of the satellite does not appear. For a
given orbit, a satellite with a large mass has
exactly the same orbital speed as a satellite with
a small mass.
26
Example 9: Orbital Speed of the
Hubble Space Telescope
Determine the speed of the Hubble Space
Telescope orbiting at a height of 598 km above the
earth’s surface.
Orbital radius r must be determined relative to the
center of the earth. The radius of the earth is
approximately 6.38*106m, r=6.98*106m
27
The orbital speed is
28
Global Positioning System(GPS)
29
Example 10: A Super-massive
Black Hole
The Hubble Telescope has detected the light
being emitted from different regions of galaxy
M87. The black circle identifies the center of the
galaxy. From the characteristics of this light,
astronomers have determined an orbiting speed
of 7.5*105m/s for matter located at a distance of
5.7*1017m from the center. Find the mass M of
the object located at the galactic center.
30
Replacing ME with M
=4.8*1039kg
31
The ratio of this incredibly large mass to the mass
of our sun is (4.8*1039kg)/(2.0*1030kg)=2.4*109.
Matter equivalent to 2.4 billion suns is located at
the center of galaxy M87. The volume of space in
which this matter is located contains relatively few
visible star. There are strong evidences for the
existence of a super-massive black hole.
“black hole”
tremendous mass prevents even
light from escaping. The light that forms the image
comes not from the black hole itself, but from
matter that surrounds it.
32
Period T of a satellite is the time required for
one orbital revolution.
33
Period is proportional to the three-halves power
of the orbital radius is know as Kepler’s third
law. (Johannes Kepler, 1571-1630). Kepler’s third
law also holds for elliptical orbits.
“synchronous satellites”: orbital period is chosen
to be one day, the time it takes for the earth to
turn once about its axis. Satellites move around
their orbits in a way that is synchronized with
the rotation of the earth, appearing in fixed
positions in the sky and can serve as
“stationary”.
34
Example 11: The Orbital Radius
for Synchronous Satellites
The period T of a synchronous satellite is one day.
Find the distance r from the center of the earth and
the height H of the satellite above the earth’s
surface. The earth itself has a radius of 6.38*106m.
T=8.64*104s
35
r = 4.23*107m
H=4.23*107m-0.64*107m=3.59*107m (22300 mi)
36
Check your understanding 3
Two satellites are placed in orbit, one about Mars and
the other about Jupiter, such that the orbital speeds are
the same. Mars has the smaller mass. Is the radius of the
satellite in orbit about Mars less than, greater than, or
equal to the radius of the satellite orbiting Jupiter?
Less than.
MMars ---smaller
Since v is the same, M small -----r small.
37
Apparent Weightlessness and
Artificial Gravity
The idea of life on board an orbiting satellite
conjures up visions of astronauts floating around in
a state of “weightlessness”
38
Conceptual Example 12:
Apparent Weightlessness and
Free-Fall
Objects in uniform circular motion continually
accelerate or “fall” toward the center of the
circle, in order to remain on the circular path.
The only difference between the satellite and the
elevator is that the satellite moves on a circle, so
that its “falling” does not bring it closer to the
earth. True weight is the gravitational force
(F=GmME/r2) that the earth exerts on an object
and is not zero.
39
Example 13: Artificial Gravity
At what speed must the
surface of the space
station (r=1700m) move
in the figure, so that the
astronaut at point P
experiences a push on his
feet that equals his earth
weight?
40
FC=mv2/r
Earth weight of the astronaut (mass=m) is mg.
FC=mg=mv2/r
41
Example 14: A Rotating Space
Laboratory
The outer ring (radius=r0)
simulates gravity on earth, while
the inner ring (radius=r1) simulates
gravity on Mars
A space laboratory is rotating
to create artificial gravity. Its
period of rotation is chosen so
the outer ring (r0=2150m)
simulates the acceleration due
to gravity on earth (9.80 m/s2).
What should be the radius r1
of the inner ring, so it
simulates the acceleration due
to gravity on the surface of
Mars (3.72 m/s2)?
42
Centripetal acceleration:
ac=v2/r,
speed v and radius r:
T is the period of the motion.
The laboratory is rigid. All points on a rigid
object make one revolution in the same time.
Both rings have the same period.
43
Inner ring
Outer ring
Dividing the inner ring expression by the outer ring expression,
r1 = 816 m
44
Check your understanding 4
The acceleration due to gravity on the moon is onesixth that on earth.
(a) Is the true weight of a person on the moon less
than, greater than, or equal to the true weight of
the same person on the earth?
(b)Is the apparent weight of a person in orbit about
the moon less than, greater than, or equal to the
apparent weight of the same person in orbit about
the earth?
(a) Less than
(b) Equal to
45
Vertical Circular Motion
Usually, the speed varies in this stunt.
“non-uniform”
46
(1)
(3)
=FC1
=FC3
(4)
(2)
=FC2
=FC4
The magnitude of the normal force changes, because
the speed changes and the weight does not have the
same effect at every point.
47
The weight is tangent to the circle at points 2
and 4 and has no component pointing toward
the center. If the speed at each of the four
places is known, along with the mass and
radius, the normal forces can be determined.
They must have at least a minimum speed at the
top of the circle to remain on the track. v3 is a
minimum when FN3 is zero.
Weight mg provides all the centripetal force.
The rider experiences an apparent
weightlessness.
48
Concepts & Calculation
Examples 15: Acceleration
At time t=0 s, automobile A is
traveling at a speed of 18 m/s along
a straight road and its picking up
speed with an acceleration that has
a magnitude of 3.5 m/s2.
At time t=0 s, automobile A is
traveling at a speed of 18 m/s in
uniform circular motion as it
negotiates a turn. It has a
centripetal acceleration whose
magnitude is also 3.5 m/s2.
Determine the speed of each
automobile when t=2.0 s.
49
Which automobile has a constant acceleration?
Both its magnitude and direction must be constant.
A has constant acceleration, a constant magnitude of 3.5
m/s2 and its direction always points forward along the
straight road.
B has an acceleration with a constant magnitude of 3.5
m/s2, a centripetal acceleration, which points toward the
center of the circle at every instant.
Which automobile do the equations of kinematics
apply?
Apply for automobile A.
50
Speed of automobile A at t=2.0 s
v=v0+at=18 m/s+(3.5 m/s2)(2.0 s)=25 m/s
B is in uniform circular motion and goes
around the turn. At a time of t=2.0 s, its speed
is the same as it was at t=0 s, i.e., v=18 m/s.
51
Concepts & Calculation Example
16: Centripetal Force
Ball A is attached to one end of a
rigid mass-less rod, while an
identical ball B is attached to the
center of the rod. Each ball has a
mass of m=0.50kg, and the length
of each half of the rod is L=0.40m.
This arrangement is held by the
empty end and is whirled around
in a horizontal circle at a constant
rate, so each ball is in uniform
circular motion. Ball A travels at a
constant speed of vA=5.0m/s. Find
the tension in each half of the rod.
52
How many tension forces contribute to the centripetal
force that acts on ball A?
A single tension force of magnitude TA acts on ball A,
due to the tension in the rod between the two balls. This
force alone provides the centripetal force keeping ball A
on its circular path of radius 2L
How many tension forces contribute to the centripetal
force that acts on ball B?
Two tension forces act on ball B. TB-TA
Is the speed of ball B the same as the speed of ball A?
No, it is not. Because A travels farther than B in the same
time. A travels a distance equal to the circumference of its
path, which is
(2L). B is only L . Speed of ball B is
one half the speed of ball A , or vB=2.5 m/s
53
Ball A
Ball B
Centripetal force FC
Centripetal force FC
=23N
54
Problem 4
R = 3.6m
= 25
OA = ?
55
Problem 4
REASONING AND SOLUTION Since the speed
of the object on and off the circle remains constant
at the same value, the object always travels the
same distance in equal time intervals, both on and
off the circle. Furthermore since the object travels
the distance OA in the same time it would have
moved from O to P on the circle, we know that the
distance OA is equal to the distance along the arc
of the circle from O to P.
56
Circumference =
360o
1o
25o
22.6m
(22.6/360)m
(22.6/360)*25m
and, from the argument given above, we conclude that the
distance OA is 1.6m.
57
Problem 43
REASONING In Example 3, it was shown that the
magnitudes of the centripetal acceleration for the
two cases are
According to Newton's second law, the centripetal
force is
(see Equation 5.3).
58
SOLUTION
a. Therefore, when the sled undergoes the
radius 33 m,
turn of
b. Similarly, when the radius of the turn is 24 m,
59
Problem 46
REASONING AND SOLUTION The force
P supplied by the man will be largest when
the partner is at the lowest point in the
swing. The diagram at the right shows the
forces acting on the partner in this
situation. The centripetal force necessary
to keep the partner swinging along the arc
of a circle is provided by the resultant of
the force supplied by the man and the
weight of the partner.
60
From the figure
Therefore
Since the weight of the partner, W, is equal to mg, it
follows that m = (W/g) and
61