Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
AirFree ® ™Dispensing AIRFREE DISPENSING Systems SYSTEMS DISPENSE TIP Closed-Loop Verification LOCATOR How do you verify the liquid dispense volume is the volume you requested? Each SmartDispenser® is designed to communicate with a n A&D Company’s AD4212B Analytical Weighing Sensor. The SmartDispenser® administrator may activate theweighing sensor option in the administration section of the SmartDispenser®. The weighing sensor may be used in line during production or set up as acalibration station in the quality control department. Before installing a SmartDispenser® perform a capabilities test by dispensing a full syringe reservoir onto the weighingsensor. The weighing sensors automatically record allweight data to a file located on the SmartDispenser® hard drive. Download the production report via USBmemory stick or local network, import into Excel, calculatethe mean and standard deviation. The mean is your TargetWeight and the standard deviation, calculated into a percentage, is your +/- tolerance. Fishman Corporation 192 South Street, Hopkinton, MA 01748, United States US & Canada: 800-433-2115 | United Kingdom: 1905 456008 | Europe: +441905 456008 Worldwide: 1-508-435-2115 | www.fishmancorp.com Dispensing Innovation™ AirFree ® ™Dispensing AIRFREE DISPENSING Systems SYSTEMS DISPENSE TIP Closed-Loop Verification LOCATOR Input the Target Weight and tolerance into theSmartDispenser® GUI interface. After each dispense the SmartDispenser® will compare the actual weight dispensed to +/- tolerance and, if out of tolerance, a warning message will appear on screen and need to be cleared before the SmartDispenser® returns to operation. When operating via PLC, a “weight is out of tolerance” signal is sent from the SmartDispenser® or SDIK™ to the PLC, then a signal must be sent from to the PLC to SmartDispenser® or SDIK™ to restart. All weights and weight stoppage are automatically recorded to an Excel .CSV file for post production analysis. Fishman Corporation 192 South Street, Hopkinton, MA 01748, United States US & Canada: 800-433-2115 | United Kingdom: 1905 456008 | Europe: +441905 456008 Worldwide: 1-508-435-2115 | www.fishmancorp.com Dispensing Innovation™