Download USB Extender Plus Series

USB
USB Extender
Plus Series
TWISTED PAIR EXTENDER FOR
USB PERIPHERALS
Extend and switch USB peripherals
between multiple locations
AA Extends USB peripherals up to
1,980 feet (600 meters) through a
Gigabit Ethernet network
AA Extends USB peripherals up to 330 feet
(100 meters) point-to-point over one
CATx cable
AA Supports USB 2.0/1.0 devices with data
rates up to 480 Mbps
AA Choice of rack-mountable and
architectural form factors
AA USB switching controller lets you easily
create USB switching systems
Introduction
The USB Extender Plus Series extends and switches USB signals
Where longer distances are required or when pairing one transmitter
from peripheral devices to a host computer up to 1,980 feet
to multiple receivers, the USB Extender Plus Series transmitter and
(600 meters) through a Gigabit Ethernet network or up to 330 feet
receiver can be connected to a Gigabit Ethernet switch located up to
(100 meters) point-to-point over one CATx cable. It supports
330 feet (100 meters) away to extend the total distance to 660 feet
USB 2.0/1.0 devices with data rates up to 480 Mbps and it is
(200 meters). The signal can be extended through a network of up
compatible with USB 3.0 devices that can operate at USB 2.0 data
to five Gigabit Ethernet switches, for a total transmission distance of
rates. The transmitter includes USB peripheral emulation to enable
1,980 feet (600 meters).
booting a host computer that is not connected to a keyboard or
mouse. To simplify device integration, the receiver features a built‑in,
active four‑port hub. The controller provides simple setup and control
for creating a distributed USB matrix switching system over a Gigabit
Ethernet network. Available in various form factors, the USB Extender
Plus Series supports USB peripherals such as keyboards, mice,
mass storage devices, and webcams in pro AV environments.
The USB Extender Plus Series is capable of transmitting USB signals
long distances over a CATx twisted pair infrastructure. For distances
up to 330 feet (100 meters), installation of the USB Extender Plus
enables direct connection of USB peripherals to the remote host
computer without needing additional IP network drops, equipment,
software, or drivers.
Transmitters and receivers are available in three form factors that
can be mixed and matched for optimum integration flexibility. The
compact, 1-inch quarter rack width metal enclosure is designed for
desktop, under desk, lectern, or rack mounting. The USB Extender
Plus AAP model provides convenient and elegant architectural USB
connectivity. The USB Extender Plus D is a decorator-style wallplate
that fits into a single-gang wall box.
The USB Plus Matrix Controller provides a simple management
interface to create USB switching systems using up to 64 USB
Extender Plus Series transmitters and receivers. Any AV control
processor can easily control USB switching using SIS commands
sent via Ethernet or RS-232. The system can be configured quickly
and easily using Extron's Product Configuration Software - PCS.
FEATURES
Extends USB peripherals up to 1,980 feet
(600 meters) through a Gigabit Ethernet
network
Extends USB peripherals over one CATx cable
point-to-point up to 330 feet (100 meters)
Supports USB 2.0/1.0 devices with data rates up
to 480 Mbps. Compatible with USB 3.0 devices
that can operate at USB 2.0 data rates
Enables bulk, control, interrupt, and isochronous transfers as defined
by the USB specification.
Receiver features an integrated four-port hub
with 5 Volts, 500 mA available on each port
Allows simultaneous connection to multiple peripheral devices such
as the Extron Annotator 300, mass storage devices, keyboards,
mice, or other HID – Human Interface Devices.
One transmitter can connect to four receivers
Using a Gigabit Ethernet switch, one transmitter can support up to
four receivers via an IP network.
Peripheral emulation
Offers increased system reliability by emulating a connection
between the host and an HID-compliant keyboard and mouse.
Real-time status LED indicators for
troubleshooting and monitoring
Provides visual confirmation of port activity between an active host
and each connected peripheral device.
Choice of rack-mountable and architectural
form factors
Available in a compact, 1-inch rack-mountable metal enclosure, an
AAP - Architectural Adapter Plate, and a single-gang decorator-style
wallplate for easy integration into a variety of environments.
USB switching
controller lets you
easily create USB
switching systems
One controller can manage
a switcher configuration
of up to 64 USB Extender
Plus Series transmitters
and receivers. Enables the
use of serial or IP commands for
integration into a control system.
Device class filtering on select models restricts
the range of device types to HID and smart card
readers - USB Extender Plus HID
Device class filtering prevents unauthorized downloading or
uploading of content via the USB port in secure environments. The
USB Extender Plus HID is configured at the factory, such that device
class filtering cannot be removed or altered in the field.
Highly reliable, energy-efficient external
universal power supply included, replacement
part #70-775-01
Provides worldwide power compatibility, with high demonstrated
reliability and low power consumption for reduced operating costs.
Applications
Extron
USB Extender Plus T
Twisted Pair Transmitter
for USB Peripherals
Extron
USB Extender Plus R
Twisted Pair Transmitter
for USB Peripherals
Twisted Pair Receiver
for USB Peripherals
Twisted Pair Receiver
for USB Peripherals
POWER
POWER
1
3
2
4
12V
1.0A MAX
OUTPUT
OUTPUTS
INPUT
INPUT
OUTPUT
12V
1.0A MAX
INPUT
12V
1.0A MAX
POWER
POWER
12V
1.0A MAX
OUTPUTS
Extron
USB Extender Plus R
INPUT
Extron
USB Extender Plus T
1
3
2
4
HOST
HOST
Gigabit Ethernet Switch
USB
USB
USB
USB
CAT 5/5e/6/7
up to 330' (100m)
CAT 5/5e/6/7
up to 330' (100m)
100-240VAC
1.0A MAX
OUTPUTS
INPUTS
1
UNIVERSAL
2
HDMI
3 DISPLAYPORT
1
HDMI
2A
HDMI
REMOTE
2B
SIG
USB
LINK
OVER TP
HDBT
RS-232
DTP
50/60 Hz
Extron
Annotator 300
HDCP-Compliant
Annotation
Processor with
DTP Extension
CAT 5/5e/6/7
up to 330' (100m)
OUT
IR
1
LAN
RESET
1 2 3
CONTACT
100-240VAC
RS-232
USB Touchscreen
Display
2
Tx Rx G Tx Rx
Tx Rx G
1.0A MAX
OUTPUTS
INPUTS
1
UNIVERSAL
2
HDMI
3 DISPLAYPORT
1
HDMI
2A
HDMI
2B
REMOTE
SIG
USB
LINK
OVER TP
HDBT
RS-232
DTP
50/60 Hz
HDMI
Extron
Annotator 300
1
IR
LAN
1 2 3
CONTACT
RS-232
RESET
2
Tx Rx G Tx Rx
Tx Rx G
HDMI
HDCP-Compliant
Annotation
Processor with
DTP Extension
Projector/Display
OUT
USB Touchscreen
Display
Projector/Display
POINT-TO-POINT
NETWORKED
A single CATx cable connects any transmitter and receiver up to 330 feet (100 meters)
apart.
CATx cables connect any transmitter and receiver via a Gigabit Ethernet Network, of up
to five switches, up to 1,980 feet (600 meters) apart.
Workstations (Equipment Rack)
Discovery Wall
HDMI
HDMI
WiFi
1 2 3 4
USB
Extron
USB Extender
Plus T
Extron
1
Twisted Pair
Transmitter
For USB
Peripherals
2
3
4
HUB
STATUS
1
2 HOST
3
4
LINK
FLAT PANEL
HDMI
CPU
Extron
USB Extender
Plus D R
HDMI
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
DXP 44 HD 4K
S/PDIF
AUDIO OUTPUTS
1
OUTPUTS
INPUTS
100-240V ~ --A MAX
USB
Touch Display
MODEL 80
1
REMOTE
L
R
RESET
Tx Rx G
2
LAN
Twisted Pair Receiver
for USB Peripherals
50-60 Hz
Ethernet
Station #1
Extron
DXP 88 HD 4K
Display #1
Station #2
Display #2
Ethernet
Station #3
Station #4
Station #5
Display #3
Extron
USB Plus
Matrix Controller
Controller for USB
Transmitters and Receivers
Laptop
2
3
4
5
6
7
8
9
Tuner
123
Volume
Channel
Presets
Mute
0
Lighting
Last
More
Presets
Enter
Ethernet
Tablet with
Extron
Control App
Audio
Control
System
Off
December 15, 2013 - 7:58 AM
Help
Ethernet
LAN / PoE
COM 1
Ethernet
Doc
Cam
VCR
Tuner
1
Screen
USB PLUS MATRIX
COM
Tx Rx G RTS CTS
DVD
On
Off
Mute
iPad
POWER
12V
0.2A MAX
PC
Display
Room
Control
Station #6
Ethernet
Ethernet
Matrix Switcher
COM 2
Tx Rx G RTS CTS
Tx Rx G
VOL
RELAYS
V
C G
1
2
C
DIGITAL I/O
1
2
3
4
IPCP PRO 250
G
eBUS
IR/S
+V +S -S G
PWR OUT = 6W
S
G
LAN
Extron
IPCP Pro 250
IP Link Pro
Control Processor
Ethernet
Gigabit Ethernet Switch
SWITCHED
CATx cables connect multiple transmitters and receivers via a Gigabit Ethernet Network, of up to five switches, up to 1,980 feet (600 meters) apart, with connections between the
transmitters and receivers dynamically controlled by the USB Plus Matrix Controller.
Specifications
Form factors can be mixed and matched between transmitters and
receivers for mounting in all types of furniture and locations.
Rack-Mount
USB Extender Plus T
USB Extender Plus R
USB EXTENDER PLUS T/R SERIES
USB host supportxHCI (USB 3.0), EHCI (USB 2.0), OHCI/UHCI (USB 1.1)
USB data ratesLow speed (1.5 Mbps), full speed (12 Mbps), high speed
(480 Mbps)
USB host — Tx units
Number/signal type1 USB
USB hub — Rx units
Number/signal type(1) 4-port USB hub
Interconnection between transmitter and receiver
Connectors1 female RJ-45 per unit
Signal transmission distance
Point to pointUp to 330' (100 m)
Over the networkUp to 1980' (600 m)**
NOTE: **Over the network distance is through connection of up to five network switches.
Power supplyExternal
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A
Enclosure typeMetal
GENERAL
Regulatory compliance
SafetyCE, c-UL, KCC, UL
EMI/EMCCE, C-tick, FCC Class A, ICES, VCCI Class A
EnvironmentalComplies with the appropriate requirements of RoHS,
WEEE
Architectural Adapter Plates
USB PLUS MATRIX CONTROLLER
Ethernet control
Network interface controllers (NICs)1
Serial control
Quantity/type1 bidirectional RS-232
USB Extender Plus AAP T - Front
GENERAL
Power supplyExternal
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
Power consumption
Device and power supply2.0 watts, 100-240 VAC, 50-60 Hz
Mounting
Rack mountYes, with optional 1U rack shelf or back of the rack
mounting kit
Furniture mountYes, with optional bracket kit
Enclosure typeMetal
Warranty3 years parts and labor
NOTE: All nominal levels are at ±10%.
USB Extender Plus AAP R - Front
Decorator-Style Wall Plates
Model
USB Extender Plus T
USB Extender Plus R
USB Extender Plus D T
USB Extender Plus D R
USB Extender Plus AAP T
USB Extender Plus AAP R
USB Extender Plus AAP R
USB Extender Plus T HID
USB Extender Plus R HID
USB Plus Matrix Controller
USB Extender Plus D T - Front
USB Extender Plus D R - Front
Version Description
Transmitter
Receiver
Transmitter - Decorator-Style Version - White
Receiver - Decorator-Style Version - White
Transmitter - AAP Version - Black
Receiver - AAP Version - Black
Receiver - AAP Version - White
HID Transmitter
HID Receiver
Controller
Part number
60-1471-12
60-1471-13
60-1473-13
60-1473-23
60-1472-12
60-1472-22
60-1472-23
60-1539-12
60-1539-13
42-267-01
For complete specifications, please go to www.extron.com
Specifications are subject to change without notice.
WORLDWIDE SALES OFFICES
A n a h e i m • R a l e i g h • S i l i c o n Va l l ey • Da l l a s • N ew Yo r k • Wa s h i n g to n, DC • To ro nto • M ex i c o C i t y • Pa r i s • Lo n d o n • F r a n k f u r t
M a d r i d • S to c k h o l m • A m e r s foo r t • M o s c ow • D u b a i • J o h a n n e s b u r g • Te l Av i v • S yd n e y • M e l b o u r n e
N e w D e l h i • B a n g a l o r e • S i n g a p o r e • S e o u l • S h a n g h a i • B e i j i n g • H o n g Ko n g • To k yo
www.extron.com
© 2017 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.
05-2017
68-3136-01
REV. A
Letter - English - NP