Download ATMOSPHERE AND WEATHER local energy budgets

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Intercooler wikipedia , lookup

Hyperthermia wikipedia , lookup

Thermal conduction wikipedia , lookup

R-value (insulation) wikipedia , lookup

Economizer wikipedia , lookup

Solar air conditioning wikipedia , lookup

Atmospheric convection wikipedia , lookup

Transcript
LOCAL ENERGY BUDGETS
 An energy budget refers to the amount of energy
entering a system, the amount leaving the system, and
the transfer of energy within the system.
 Scale – global (macro), regional (meso) and local
(micro).
CLASSIFYING CLIMATE AND
WEATHER
VOLCANIC DUST FROM ICELANDIC
VOLCANO OVER EUROPE IN 2010
 Flights over northern Europe were disrupted as
airports were closed and flights cancelled because of
volcanic dust in an ash plume, after the volcano
Eyjafjallsjokull erupted.
DAYTIME ENERGY BUDGETS
 INCOMING SOLAR RADIATION
 REFLECTED SOLAR RADIATION
 SURFACE ABSORPTION
 SENSIBLE HEAT TRANSFER
 LONG-WAVE RADIATION
 LATENT HEAT (EVAPORATION)
INCOMING SOLAR RADIATION
 Abbreviated to insolation
 Affected by latitude, season and cloud cover
 Varies with the angle of the sun and with cloud type
e.g. When the sun is low in the sky, about 23% of
insolation is received at the earth’s surface, when the
sun is high in the sky about 40% is received. The less
cloud cover there is, and/or the the higher the cloud,
the more radiation reaches the Earth’s surface.
REFLECTED SOLAR RADIATION
 The proportion of energy that is reflected back to the
atmosphere is known as ALBEDO.
 Albedo varies with colour – light coloured materials
are more reflective than dark coloured ones.
 Fresh snow has an albedo of up to 90%.
 A black road surface has an albedo of as low as 5%.
SURFACE ABSORPTION
 Energy that reaches the Earth’s surface has the
potential to heat it.
 Much depends on the nature of the surface
 If the surface can conduct heat to a lower surface, the
surface remains cool, e.g. grass.
 If the energy remains concentrated at the surface, the
surface warms up, e.g. Rock. This is why exfoliation
occurs in hot deserts.
SENSIBLE HEAT TRANSFER
 The movement of parcels of air into and out from the
area being studied.
 Air that is warmed by the surface may begin to rise and
be replaced by cooler air. This is known as convective
transfer.
 It is very common in warm areas in the early afternoon.
LONG-WAVE RADIATION
 The radiation of energy from the Earth (a cold body)
into the atmosphere and eventually into space.
 There is also a downward movement of long-wave
radiation from particles in the atmosphere.
 The difference between the two flows is known as the
net radiation balance.
 During the day, the outgoing long-wave radiation
transfer is greater than the incoming long-wave
radiation transfer, so there is a net loss of energy from
the surface.
LATENT HEAT TRANSFER
 When liquid water is is turned into water vapour, heat
energy is used up.
 When water vapour becomes a liquid, heat is released.
 Thus, when water is present at a surface, a proportion
of the energy available will be used to evaporate it, and
less energy will be available to raise local energy levels
and temperature.
NIGHT-TIME ENERGY BUDGET
 Long-wave radiation
 Latent heat transfer (condensation)
 Sub-surface supply
 Sensible heat transfer
NIGHT-TIME ENERGY BUDGET
LONG-WAVE RADIATION
 During a cloudless night, there is a large loss of long-
wave radiation from the Earth, as clouds trap energy
and prevent it from escaping. There is a net energy
loss from the surface. This is common in deserts.
 On a cloudy night, clouds return some of the longwave radiation to the surface, hence the overall loss of
energy is reduced, and nights tend to be warmer.
LATENT HEAT TRANSFER
(CONDENSATION)
 During the night, water vapour in the air close to the
surface can condense to form water as the temperature
drops.
 Condensation releases latent heat, increasing energy
to the surface.
 In some cases, evaporation can occur at night,
especially where there local sources of heat e.g. A
furnace.
SUB-SURFACE SUPPLY
 The heat transferred to the soil and bedrock during
the day may be released back to the surface at night.
This can partly off-set night-time cooling at the
surface.
SENSIBLE HEAT TRANSFER
 Cold air moving into an area may reduce temperatures
whereas warm air may supply energy and raise
temperatures.
TEMPERATURE CHANGES CLOSE TO
THE SURFACE
 Ground surface temperatures can vary considerably
between day and night.
 During the day, the ground heats the air by radiation,
conduction (contact) and convection. The ground radiates
energy and as the air receives more radiation than it emits,
the air is warmed. Air close to the ground is also warmed
through conduction. Air movement at the surface is slower
due to friction with the surface, so there is more time for it
to be heated. The combined effect of radiation and
conduction is that the air becomes warmer, and rises as a
result of convection.
 At night, the ground is cooled as a result of radiation.
Heat is transferred from the air to the ground. The air
in contact with the ground loses more heat.