Download x-line up2 230v-240v ac control ip67 white mix / rgb mix

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Stage monitor system wikipedia , lookup

Audio power wikipedia , lookup

Resilient control systems wikipedia , lookup

Loading coil wikipedia , lookup

Telecommunications engineering wikipedia , lookup

Control system wikipedia , lookup

Rectiverter wikipedia , lookup

Electrical connector wikipedia , lookup

Power over Ethernet wikipedia , lookup

Electrical wiring wikipedia , lookup

Home wiring wikipedia , lookup

Transcript
Product technical data. 17-02-2014
X-LINE UP2 230V-240V AC CONTROL IP67
WHITE MIX / RGB MIX
Monochromatic power LED
RGB MIX ( red ; green ; blue ) / WHITE MIX ( warm white ; neutral white ; cold white )
RGB MIX
WHITE MIX
L. 350mm / 650mm / 950mm
Optics : 2x2° / 2x5° / 2x15° / 2x22,5° / 47x8°
Description :
Linear recessed power LED luminaire for outdoor lighting.
Provide suitable drainage as well waterproofs connectors. Not roll over.
Lighting features :
WHITE MIX / RGB MIX power LED.
Optics : 2x2° ; 2x5°; 2x15°; 2x22,5° ; 47x8°.
Colours : RGB MIX ( red ; green ; blue ) ; WHITE MIX ( warm white ; neutral white ; cold white ).
LED lifetime : 60,000 hours to 70% of the luminous flux.
Electrical features :
Class I. Wiring in parallel on sector 230-240V, integrated 2x350mA power supply.
3G1mm² HO7RNF cable, length : 1.50m. 2 DMX crossing cables, length : 1.50m.
Maximum ambient temperature : 35°C.
Bidirectional DMX : Re-addressing is possible with RDM protocol.
Mechanical features :
IP67. 960°. IK10. 304 stainless steel flange thickness : 5mm. Aluminium profile. 350,
Clear650,
or frosted
950mmglass (with frosted adhesive)
thickness : 19mm. Recessed box delivered. Delta Seal® resistant corrosion treatment stainless steel screws. Adjustable luminaire
without opening : +/- 15° using magnet. 2 grips delivered : that allows you to remove luminaire from the recessed box.
Dimensions : 120x150xl.mm.
Option(s) :
Waterproof connecting box IP68 code : 012-9052
±15°
Grips delivered, that allows you to remove
luminaire from the recessed box.
Code : 822-9015
Adjust +/- 15° with magnet.
Photo & sketch (mm)
±15°
Recessed box
358 / 658 / 958mm
120
350, 650, 950mm
150
Option :
Waterproof connecting box IP68
code : 012-9052
104
Boîtier d’encastrement
Wiring in parallel (ex.)
PARALLEL
Parallel connection.
In a parallel connection, each element is connected to
the voltage source by 2 wires. (phase, neutral and earth).
117
358 / 658 / 958mm
Next X-LINE UP³
or at end of DMX line
150
104
Option :
Boîtier de raccordement étanche IP68
code : 012-9052
Provide
waterproofs connectors
DMX / DALI
CONTROL
230VAC
The company reserve the right to change technical specifications for all the products according to the research and product development advances.
www.flux-lighting.com
X-LINE UP2 230V-240V AC CONTROL IP67
WHITE MIX / RGB MIX
X-LINE UP² installation
X-LINE UP2 RGB MIX / WHITE MIX CONTROL 230V IP67
1 - Installing inground uplight soil so that water (eg rain) can drain from the surface.
2 - Install recessing box or sealing tube, plan ahead scabbards for wiring and waterproof connections.
3 - Provide
adequate drainage : minimum height of the passage of the cable (see sketch). No warranty can be made in case
of sealing problem, if no sufficient drainage is done under the unit to evacuate water.
2x2°
2x5°
2x15°
2x22,5°
47x8°
PILOTAGE DMX
DMX control characteristics :
- Control maximum 512 channels.
- 256 light levels per channel.
- Maximum 25 fixtures (ex.: PILOTBOX) per DMX line to maximum length of 200 meters.
- Maximum length of DMX cable between DMX control and the first fixture : 100mt.
- Connection will be made with special DMX cable with XLR 3-pin wires which is standardized.
4-F
ixe recessing box or sealing tube (protections against projection before setting the luminaire).
5 -Check the orientation of products to install in the same direction.
6-O
nce recessing box or sealing tube fixed, remove wooden blocks and make waterproof connection (switched off) and ensure the
good installation of the luminaire (switched on).
7 - Put
in its recessed box while paying attention not to catch cable, screw or clip the luminaire.
8 - Clean glass surface with sponge and duster after the installation.
When we have to exceed maximum of (25) fixtures or maximum of length (200mt) per DMX line, we have to use a line distributor
called SPLITTER.
On a 4-way DMX SPLITTER, you can connect 4 lines of 25 fixtures.
SPLITTER is a 4-way DMX booster, each output and input can be isolated and separate from each other.
For all installation, is important to know how many DMX channels are use for each fixture.
Example : PILOTBOX LED RGB 350mA use 3 DMX channels.
Example of X-LINE UP installation
Concrete
Recommendation :
Beyond 200mt of DMX cable or on unused outputs’Splitter : We recommend using 120 Ohms DMX terminal resistance at each end
of DMX line, (Set code : 890-9100).
More commonly called DMX cap, its role is to enssure the good DMX signals transmission and avoid EMI (Electromagnetic
Interference).
POWER & CONSUMPTION
Caution : Indicated Output Power (W) is LED output without power supplies, components & power factor (Cos φ), in case of large
quantity of luminaires on installation, consult us.
CONNECTIONS
Avoid any traction on cable when connecting. Provide waterproof connection.
Provide enough cable length to remove the luminaire from its support.
INSTRUCTIONS
1 - Observe the usual precautions when connecting 230V (connection to earth / compliance phase-neutral…).
2 - Refer to the mode of connection : parallel.
3 - Comply with the polarity of luminaires and colours code cables.
4 - Comply with the specified operating temperature. Minimum ventilation (natural) and heat dissipation needed for a good working
order.
5 - For a correct use of LED luminaires, it is very important to consider the thermal environment to which the product will be installed.
6 - A controlled thermal regulation of the various LED luminaires can provide reliable and optimal operation.
DRAINAGE
REQUIRED
Provide : Scabbard and waterproof junction box
Codes
WHITE MIX
2x2°
2x5°
822-3800
822-3825
822-3850
822-3805
822-3830
822-3855
2x15°
822-3810
822-3835
822-3860
2x22,5°
822-3815
822-3840
822-3865
47x8°
822-3820
822-3845
822-3870
L. (mm)
Weight
LED Qty.
L. (mm)
Weight
LED Qty.
350
650
950
5,8kg
10,3kg
15kg
12
24
36
W
15W
29W
44W
RGB MIX
2x2°
2x5°
822-3725
822-3750
822-3775
822-3730
822-3755
822-3780
2x15°
822-3735
822-3760
822-3785
2x22,5°
822-3740
822-3765
822-3790
47x8°
822-3745
822-3770
822-3795
350
650
950
5,8kg
10,3kg
15kg
12
24
36
W
15W
29W
44W
The company reserve the right to change technical specifications for all the products according to the research and product development advances.
www.flux-lighting.com