Download Chapter 7 - Emax Power Analysis

PdMA MCEGold PRODUCT SUPPORT MANUAL
EMAX POWER ANALYSIS
The Test Location Selection window opens displaying a test location graph for the type of
asset selected. See Figure 7-5. Use the graph to determine the location, then click the
down arrow in the Test Location text box, select the location from the list, and click OK.
Figure 7-5: DC Asset Test Location
Probe Settings
Probe Settings selection is available for all asset types and
tests. This is a required field.
Select the Probe Settings from the drop down list. It may be
necessary to use the scroll bar to see the complete list.
Carrier Frequency/Line Frequency
Carrier Frequency selection is available for all asset types and tests, except
DC EMAX Auto, DC Current Analysis, and DC In-Rush/Start-Up. For those
exceptions it is labeled Line Frequency.
Select the Carrier or Line Frequency from the drop down list. The choices are 60 Hz or 50
Hz.
REV. 0-04/08
© 2008 PdMA Corporation
7-9