Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
code DL 10055N Technical specifications Description MECHANIC POWER DIGITAL Didactic equipment: suitable for direct measurement of motor output torque through load cell and of rotating speed through optical transducer, with mechanical power display; provided with direct current variable power MEASURING UNIT supply for the excitation of the brakes or of the dynamometer. Digital readout of the measured quantities. Connector for overspeed protection of the motors through the connection to the power supply module. Ambient temperature sensor and probe for measuring the temperature of the motor. Communication: RS485 with MODBUS RTU protocol. The module must be composed of: Digital readout by LCD 20x2 of the measured quantities. Connector for over speed protection of the motors through the connection to the power supply module. Ambient temperature sensor and probe for measuring the temperature of the motor. Communication: RS485 with MODBUS RTU 8 N 1 protocol. Torque: suitable for measuring the maximum torque of the laboratory through the load cell Speed: suitable for measuring the maximum speed of the machines of the laboratory Power: suitable for measuring the maximum power of the machines of the laboratory 0 to 220V, 2A max., continuously variable dc power supply unit for the excitation of either machines or brakes. Power supply: single-phase from mains 110 /240 Volt 50/60Hz Button for switching scaling - International System/ UK System Technical features: • Torque: suitable for measuring the maximum torque of the laboratory through the load cell • Speed: suitable for measuring the maximum speed of the machines of the laboratory • Power: suitable for measuring the maximum power of the machines of the laboratory • Dc output: 0-220 V, 2 A • Power supply: single-phase from mains Torque: 9.99 -50.0 Nm (1mV/dgt) Speed: 6000 rpm (1mV/rpm) Power: 9990 W (1mV/W) DC output: 0-220 V, 2A / Power supply: 220 V, 50/60 Hz On the front panel the following elements must be included: Connector for speed protection connection Connector for speed transducer connection Load cell connector DC power supply switch Thermal protection DC power supply voltage 1 LCD diplay for mechanical parameters 1 LCD diplay for thermal parameters The module must be provided with a variable dc power supply unit to be used for the excitation of either machines or brakes. Output voltage: DC, 0 to 220V Maximum current: 2A Protection: Thermal 2A The unit must be supplied with a theoretical and practical manual in English language