* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download XE42 - 200 Series (HCACMOS), 5 V
Survey
Document related concepts
Integrating ADC wikipedia , lookup
Operational amplifier wikipedia , lookup
Schmitt trigger wikipedia , lookup
Phase-locked loop wikipedia , lookup
Resistive opto-isolator wikipedia , lookup
Amateur radio repeater wikipedia , lookup
Power electronics wikipedia , lookup
Transistor–transistor logic wikipedia , lookup
Wien bridge oscillator wikipedia , lookup
Switched-mode power supply wikipedia , lookup
Spectrum auction wikipedia , lookup
Superheterodyne receiver wikipedia , lookup
Opto-isolator wikipedia , lookup
Valve RF amplifier wikipedia , lookup
Radio transmitter design wikipedia , lookup
Transcript
XE42 - 200 Series (HCACMOS), 5 V High Reliability Hybrid Microcircuit Crystal Oscillators Surface Mount “Formed Leads” Package #3 #4 Features Ruggedized 4 Point Crystal Mount Tristate Output Option Radiation Tolerant to 10K Rads Low Profile Surface Mount, 0.165” Max. Height 100% Screening Options Low Phase Noise Hermetically Sealed, Ceramic Package ECCN: EAR99 • • • • • • • • Marking #1 #2 .200 + .005 (5.08 + .13) .290 + .005 (7.4 + .13) .055 ( 1.4 ) Typ. .165 Max (4.19) Applications • • • • • .018 + .003 (.46 + .08) High Shock & Vibration Applications Navigation Systems Aerospace Instrumentation Benign Space Applications Gun Launched Munitions .070 (1.78) • • • • • • Dimensions: Inches (mm) .130 (3.3) Package Specifications & Outline: Package : Ceramic 90% AL2 O3 Seal: Hermetic – Resistance Welded Weight: 0.5 Gms typical, 0.6 Gms Max. o Thermal Resistance, Junction to Case ( θJC ): 30 C / Watt o Solder Reflow, Temp./Time: 260 C, 10 Secs. Max. Lead Material & Finish: Kovar, 50 to 80 μ inches gold over 100 to 250 μ inches Nickel Typical PCB Layout .200 (5.08) Hot Solder Tinning per MIL-PRF-55310 is optional at additional cost. .008 + .001 (.20 + .03) .050 (1.27) Typ. .350 + .005 (8.89 + .13) LEAD# FUNCTION 1 E/D (Optional) 2 GND/CASE 3 OUTPUT 4 VDD .345 (8.76) E/D ( Enable/Disable ) Input: A “Low” level at the input disables the Output into a high impedance state. E/D Input has internal pull-up. It can be left floating or connected to Vdd. Contact Xsis Electronics at [email protected] for any special requirements. ORDERING INFORMATION ( Please build your part number from options below ) : o P/N EXAMPLE: XE42 - 243G - M - 24.000 MHz = XE42 ‒ 2 4 3 G M 24.000 MHz Model # Output Frequency Frequency Stability Options 1 = + 0.1% 2 = + 500 PPM 3 4 5 6 7 Rev 03 /16 = = = = = + 100 PPM + 50 PPM + 20 PPM * + 10 PPM * + 25 PPM * o 5.0 V HCACMOS, + 50 PPM over -55 C to +125 C, Tristate Output, 883B Screening and 24.000 MHz 100% Screening Options Operating Temp. Range Options 1 2 3 4 5 6 = = = = = = 0 oC - 40 oC - 55 oC - 55 oC - 40 oC - 20 oC to + 70 oC to + 85 oC to +125 oC to +105 oC to + 95 oC to + 70 oC Tristate Options G = Tristate Blank = No Tristate 883B Screening is same as MIL-PRF-55310 Class B Screening HI-REL Screening is similar to MIL-PRF-55310 Class S Screening * Frequency Stability Options 5, 6 & 7 are not available for all operating temperature ranges. Xsis Electronics, Inc., 12620 W. 63rd St., Shawnee, KS 66216 M = 883B Screening H = HI-REL Screening Blank = No Screening Page 1 of 3 Tel. 913-631-0448 Fax. 913-631-1170, www.xsis.com, email [email protected] XE42 - 200 Series (HCACMOS), 5 V High Reliability Hybrid Microcircuit Crystal Oscillators Surface Mount “Formed Leads” Package Electrical Specifications: Parameter Specification Limits Output Frequency Range 450 KHz - 100 MHz Frequency Accuracy at +25 oC + 15 PPM Frequency Stability Vs Temperature See Ordering Information on Page 1 Operating Temperature Range See Ordering Information on Page 1 Supply Voltage (Vdd) + 5 VDC + 10% Input Current (no Load ) 450 KHz 5 MHz 20 MHz 40 MHz 60 MHz - < 5 MHz < 20 MHz < 40 MHz < 60 MHz 100 MHz 10 mA Max. 20 mA Max. 30 mA Max. 40 mA Max. 60 mA Max. Output Waveform Square Wave, HC/ACMOS Compatible < 40 MHz 55/45% Max. > 40 MHz 60/40% Max. Output Duty Cycle ( at 50% Output Level ) Output High Level 0.9 Vdd Min. Output Low Level 0.1 Vdd Max. 10K // 15 pF 50 pF Max. for <50 MH Output Load < 30 MHz 6 nS Max. > 30 MHz 3 nS Max. ( 10% to 90% Output Levels) Rise & Fall Times ( Typical Load ) E/D Input > 3.5V or Open : Normal Output E/D Input < 0.8V: High Impedance Enable/Disable ( E/D) Start-Up Time 5 mS Max. Phase Jitter ( 10 KHz - 20 MHz Integ.) 0.35 pS rms Typical Freq. Stability Vs Supply Voltage + 4 PPM Max. for + 10% change in Supply Voltage Aging at 70 oC + 3 PPM Max. first year, + 2 PPM Max. per year thereafter Absolute Maximum Applied Voltage Storage Temperature + 7 VDC o -65 C to +125 oC For special requirements, such as, tighter output symmetry, faster start-up time, PIND screening, etc., please contact Xsis Electronics at [email protected] or call us at 913-631-0448. Rev 03 /16 Xsis Electronics, Inc., 12620 W. 63rd St., Shawnee, KS 66216 Page 2 of 3 Tel. 913-631-0448 Fax. 913-631-1170, www.xsis.com, email [email protected] XE42 - 200 Series (HCACMOS), 5 V High Reliability Hybrid Microcircuit Crystal Oscillators Surface Mount “Formed Leads” Package Packaging: Standard packaging is in ESD protective enclosed tray. Tape & Reel ( See Page 5 ) is available at additional cost. Thermal Characteristics: o Junction to case Thermal Constant ( θJC ): 30 C / Watt o Junction to Ambient ( Device floating in free air) Thermal Constant ( θJA ): 128 C / Watt Hi-Rel Screening: When HI-REL option is selected, Xsis Oscillators are subjected to 100% screening similar to Class “S” screening in accordance with MIL-PRF-55310. Refer to www.xsis.com for additional details about HI-REL screening. Typical Phase Noise (dbc/Hz): Output Frequency 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz 10 MHz -109 -140 -157 -162 -163 -164 25 MHz -100 -127 -151 -158 -160 -162 50 MHz -89 -117 -148 -157 -159 -160 96 MHz -80 -107 -139 -151 -156 -158 110 MHz -75 -102 -130 -142 -149 -153 Environmental Specifications: XE42-200 series oscillators are designed to meet or exceed the Environmental tests specified below. Customized screening and environmental testing are also available to meet your special requirements. Test Test Conditions Vibration 0.06” DA, 30 G peak, 10 - 2000 Hz, MIL-STD-202, Method 204, Cond. G Shock 1500 G, 0.5 mS, half-Sine, MIL-STD-883, Method 2002, Cond. B Temperature Cycling MIL-STD-883, Method 1010, Cond. C Thermal Shock MIL-STD-202, Method 107, Cond. B Seal ( Fine and Gross ) MIL-STD-883, Method 1014 Cond. A & C Burn-in 160 Hours, 125 C, Nominal Supply Voltage & Load Frequency Aging 30 days at 70 C, + 1.5 PPM Max. Altitude MIL-STD-202, Method 105, Cond. C Constant Acceleration MIL-STD-883, Method 2001, 5000 G Moisture Resistance MIL-STD-202, Method 106, Vibration Sub Cycle Omitted Solderability MIL-STD-202, Method 208 Resistance to Soldering Heat MIL-STD-202, Method 210, Cond B. or C as applicable Resistance to Solvents MIL-STD-202, Method 215 Internal Water Vapor Content MIL-STD-883, Method 1018 ESD Classification MIL-STD-883, Method 3015, Class 1C, HBM 1000 to 1999 Moisture Sensitivity Level J-STD-020, MSL=1 o o Rev 03 /16 Xsis Electronics, Inc., 12620 W. 63rd St., Shawnee, KS 66216 Page 3 of 3 Tel. 913-631-0448 Fax. 913-631-1170, www.xsis.com, email [email protected] XE42 - 200 Series (HCACMOS), 5 V High Reliability Hybrid Microcircuit Crystal Oscillators Surface Mount “Formed Leads” Package HCMOS Test Circuit HCMOS Output Waveform 4 Power Supply DVM High Level 0.9 VDD 3 DUT C TF TR OUTPUT MA 1 15 pF 2 10 K 50% Level GND C = .01 OR .1 uF 0.1 VDD E/D Input Low Level 0 VDC TH E/D ( Enable/Disable ) Input has an internal pull-up resistor. It can be left floating or connected to Vdd. T Symmetry = Typical Freq. Stability Vs. Temperature x 100 % Tape & Reel Data for XE42 parts FEEDING DIRECTION 50 40 XE42-243-M-10.000 MHz 2.0 + 0.1 4.0 + 0.1 Ø1.5 1.75 + 0.1 0.3 30 20 10 11.5 0 9.60 -10 XE42-L43-M 16M00000 Xsis 2515 Frequency Stability – PPM TTH 24.0 -20 -30 16.0 10.30 4.7 -40 Ø1.5 -50 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50o 60 70 80 Temperature - C 2.5 90 100 110 120 130 Ø13.0 + 0.5 26.0 Typical Solder Reflow Profile 280 260 Ramp Up 3 OC/Sec. Max. 240 Ø178 + 1 120O 240 TO 250 OC Typ. Ramp Down 6 OC/Sec. Max. 220 Temperature - oC 200 183OC 180 160 2.0 60 to 150 Secs 140 Dimensions are in mm. 120 100 80 60 60 to 120 Secs 40 Tape is EIA-481-A Compliant. 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400 420 Time - Seconds Rev 03 /16 Xsis Electronics, Inc., 12620 W. 63rd St., Shawnee, KS 66216 Page 4 of 3 Tel. 913-631-0448 Fax. 913-631-1170, www.xsis.com, email [email protected]