Download Chemical Stoichiometry Using MATLAB

Chemical Stoichiometry UsingMATLAB
P. K. Andersen and G.Bjedov
Department of Freshman Engineering
Purdue University
West Lafayette, IN 47907
Abstract
There is a fourth method, which is arguably more general
and powerful than the other three:
In beginning chemistry courses, students are
taught a variety of techniques for balancing chemical
equations. The determination of the stoichiometric
coefficients in a chemical equation is mathematically
equivalent to solving a system of linear algebraic
equations, a problem for which MATLAB is ideally
suited. Using MATLAB, it is possible to balance
equations describing all kinds of chemical
transformations, including acid-base reactions, redox
reactions, electrochemical half-reactions, combustion
reactions, and synthetic reactions. MATLAB is especially
convenient for balancing chemical equations that are
difficult to treat by traditional methods.
•
Introduction
The algebraic method is perhaps best grasped by
way of an example. The combustion of methane in
oxygen can be represented by the chemical equation
A number of different techniques have
traditionally been taught in beginning chemistry courses
for balancing chemical reactions. Three methods are
commonly found in introductory textbooks [1–3]:
•
•
•
Inspection. In its simplest form, this method may be
little more than intelligent guessing. For this reason,
it is sometimes called the trial-and-error method.
Students may be taught various rules of thumb that
make the method more efficient. (e.g., “start with an
element that appears in just one species on each side
of the equation.”)
Algebraic Method. The unbalanced chemical
equation is used to define a system of linear
equations, which can then be solved to yield the
stoichiometric coefficients [4, 5].
The algebraic method has traditionally been less popular
than the alternatives, probably because of the
inconveniences related to solving systems of equations.
However, modern mathematics software handle such
systems with ease, making the algebraic method much
more attractive.
A Simple Example
x 1CH 4 + x 2O2 → x3CO 2 + x4 H2O
Our task is to determine the unknown coefficients x1, x2,
x3, and x4. There are three elements involved in this
reaction: carbon (C), hydrogen (H), and oxygen (O). A
balance equation can be written for each of these
elements:
Carbon (C): 1⋅ x1 + 0⋅ x2 = 1⋅x 3 + 0⋅x 4
Hydrogen (H): 4⋅ x1 + 0⋅ x2 = 0⋅x 3 + 2⋅x 4
Oxygen (O): 0⋅x 1 + 2⋅ x2 = 2⋅ x3 + 1⋅x 4
Half-Equation Method. This approach, also called
the ion-electron method, is used for balancing
oxidation-reduction (redox) reactions. The reaction
is divided into two half reactions, one for oxidation,
the other for reduction. These half reactions are
balanced separately, then combined to form a
balanced redox reaction.
We write these as homogeneous equations, each having
zero on its right hand side:
Oxidation Number Method. This is another
approach for balancing redox reactions. The first
step is to assign oxidation numbers to the elements
involved in the reaction. The oxidation numbers are
balanced, after which the anions, cations, and
remaining elements are balanced by inspection.
At this point, we have three equations in four unknowns.
To complete the system, we define an auxiliary equation
by arbitrarily choosing a value for one of the coefficients:
x1 – x3 = 0
4x 1 – 2x 4 = 0
2x 2 – 2x 3 – x 4 = 0
x4 = 1
» x = x/0.5
The complete system of equations can be written in
matrix form as Ax = b, where
1
A = 4
0
0
0
0
2
0
–1 0
0 –2 ,
–2 –1
0 1
x1
x = xx 2 ,
3
x4
0
b = 0
0
1
Next we consider how this system can be solved using
MATLAB.
x =
1
2
1
2
Thus, the balanced equation is
CH 4 + 2O 2 → CO 2 + 2H 2O
The MATLAB Solution
MATLAB is a general-purpose mathematics
program that was originally designed to solve problems
involving matrices. (The name MATLAB is a
contraction of Matrix Laboratory.) This program is
ideally suited for solving matrix equations of the form Ax
= b.
After starting MATLAB, we enter the matrix A
and the column vector b. (In what follows, » is the
MATLAB prompt.)
»
1
4
0
0
A
0
0
2
0
= [
-1 0
0 -2
-2 -1
0 1];
» b = [
0
0
0
1];
Next we compute x = A–1b, in which A–1 is the inverse
of A. The function inv() computes matrix inverses:
» x = inv(A)*b
x =
0.5000
1.0000
0.5000
1.0000
Finally, we note that the stoichiometric coefficients are
usually chosen to be integers. Divide the vector x by its
smallest value:
Conservation of Mass and Charge
The reaction shown in the first example could
easily be balanced by inspection. Not so with the
following equation:
2+
2–
+
x 1Cr2O 7 + x2Fe + x3H
→ x4Cr 3+ + x 5Fe 3+ + x 6H 2O
At first glance, it might appear that this equation cannot
be balanced algebraically because there are six unknown
stoichiometric coefficients but only four elements to
conserve (Cr, O, Fe, and H). However, charge must be
conserved as well, giving rise to another balance
equation. That, plus an auxiliary equation setting the
value of one coefficient, yields six equations in six
unknowns:
Chromium (Cr): 2x 1 – x 4 = 0
Oxygen (O): 7x 1 – x6 = 0
Iron (Fe): x 2 – x 5 = 0
Hydrogen (H): x 3 – 2x 6 = 0
Charge (+): –2x 1 + 2x2 + x3 – 3x4 – 3x 5 = 0
(*): x6 = 1
From these equations we obtain
2
7
A = 0
0
–2
0
0
0
1
0
2
0
0 –1 0 0
0 0 0 –1
0 0 –1 0 ,
1 0 0 –2
1 –3 –3 0
0 0 0 1
0
0
b = 0
0
0
1
Using MATLAB, the unknown stoichiometric
coefficients are quickly determined. First we enter A and
b:
» A = [
2 0 0 -1 0 0
7 0 0 0 0 -1
0 1 0 0 -1 0
0 0 1 0 0 -2
-2 2 1 -3 -3 0
0 0 0 0 0 1];
What makes this reaction difficult is that phosphorus
appears in four different oxidation states. Nevertheless,
we can easily balance this reaction using MATLAB:
» b = [
0
0
0
0
0
1];
» A
2 4
4 0
0 0
0 0
0 0
];
Next we solve the system, this time using the left division
operator (\) instead of the inv() function. The left division
operator uses LU factorization rather than matrix
inversion, and is the preferred method of solution:
» b = [
0
0
0
0
1];
x 1P2I 4 + x 2P4+ x3H 2O → x 4PH4I + x5 H3PO 4
» x = A\b
=
0
0
2
1
0
[
-1 -1
-1 0
-4 -3
0 -4
0 1
» x = A\b
x =
x =
0.1429
0.8571
2.0000
0.2857
0.8571
1.0000
0.3125
0.4062
4.0000
1.2500
1.0000
We divide by the smallest value of x to obtain integral
coefficients. In the this case, the smallest value is found
in the first element, designated by x(1):
We divide by the first element of x to obtain integral
coefficients:
» x = x/x(1)
» x = x/x(1)
x =
x =
1.0000
1.3000
12.8000
4.0000
3.2000
1.0000
6.0000
14.0000
2.0000
6.0000
7.0000
This does not yield integral coefficients, but multiplying
by 10 will do the trick:
Thus we obtain
2–
2+
+
3+
3+
Cr2O 7 + 6Fe + 14H → 2Cr + 6Fe + 7H 2O
» x = x * 10
x =
A Difficult Redox Reaction
The oxidation number and half-reaction methods are
normally recommended for balancing redox reactions.
However, neither method works well on the following
reaction [6]:
10
13
128
40
32
The balanced equation is
6.
10 P 2I4 + 13 P4 + 128 H 2O → 40 PH 4I + 32 H 3PO 4
7.
Solve the system Ax = b for x using either the inv()
function or the left division operator (\).
If necessary, scalex to obtain integral coefficients.
Underdetermined Systems
Some reactions cannot be balanced by the algebraic
method as presented here. One such reaction is the
oxidation of hydrogen peroxide by permanganate ion in
acid solutions:
–
4
References
1.
2.
+
x 1MnO + x 2H2O 2 + x3H
→ x4Mn 2+ + x5O 2 + x 6H 2O
This equation contains six unknowns. We can write four
independent balances and an auxiliary equation, giving a
total of five equations. Thus the system is
underdetermined, having infinitely many solutions [6, 7]:
–
+
2+
–
+
2+
3.
4.
5.
2 MnO 4 + 3 H 2O 2 + 6 H → 2 Mn + 4 O2 + 6 H 2O
2 MnO 4 + 5 H 2O 2 + 6 H → 2 Mn + 5 O2 + 8 H 2O
+
2+
–
2 MnO 4 + 7 H 2O 2 + 6 H → 2 Mn + 6 O2 + 10 H 2O
+
–
2 MnO 4 + (5 + 2n) H 2O 2 + 3H
→ 2 Mn2+ + (5 + n) O 2 + (8 + 2n) H 2O
The problem here is that there are really two chemical
reactions occurring independently. One reaction is the
reduction of permanganate ion, the other is the
disproportionation of hydrogen peroxide [7, 8]:
–
+
2+
2 MnO 4 + 5 H 2O 2 + 6 H → 2 Mn + 5 O 2 + 8 H2O
2 H2O 2 → O 2 + 2 H 2O
Summary
The procedure for balancing a chemical
equation with MATLAB may be summarized as follows:
1.
Write the chemical equation showing the n unknown
coefficients x1, x2, . . . , xn.
2.
Write a balance equation for each of (n – 1)
conserved quantities (elements and charge).
3.
Write an auxiliary equation setting the value of one
of the unknowns.
4.
Express the system in the formAx = b.
5.
Start MATLAB and enter the matrix A and column
vector b.
6.
7.
8.
Chang, Raymond. Chemistry, 5th ed. McGraw-Hill.
(1994).
Masterton, William L., and Cecile N. Hurley.
Chemistry: Principles and Reactions, 2d ed.
Saunders College Publishing (1993).
Bodner, George M., and Harry L. Pardue.
Chemistry: An Experimental Science. Wiley (1989).
Porges, Arthur. “A Question of Balancing,” Journal
of Chemical Education, Vol. 22, pp. 266–267
(1945).
Kolb, Doris. “The Chemical Equation, Part II:
Oxidation-Reduction Reactions,”
Journal of
Chemical Education, Vol. 55, No. 5, pp. 326–331
(1978).
Kolb, Doris. “More on Balancing Redox Reactions,”
Journal of Chemical Education, Vol. 56, No. 3, pp.
181–184 (1979).
Dickerson, Richard E., Harry B. Gray, and Gilbert P.
Haight. Chemical Principles. W. A. Benjamin
(1970).
Standin, Anthony. “Some Simple Balancing,”
Journal of Chemical Education, Vol. 22, pp. 461–
462 (1945).