Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
This machine is not suitable for minors to use or food processing. Temp clock Introduction: Time clock This machine could transfer photos,words on mugs.It is suitable for gift,decorations and so on. Specification: Time switch Digital controller makes setting more accurate High quality heating mat makes the pressure more even Automatic time controller Easy to adjust the pressure Parameter Voltage:110V/220V Power:450W Mug mat diameter:7.5-8.5CM Mug height:within 10.5CM Weight:12KG Package:38X35X28CM Temp switch Power plug Mug heating mat handle Pressure adjust Mug Press Machine 2105 Usage: 1.Before heating , adjust the pressure(use adjust nut) according to diameter of mug. (Atten: do not press mug too tight) 2.Paste the cutted transfer paper to the mug with paper sticker. Then put the mug in the heating mat and turn on the temperature and time switch. 3.Set time at 180secs and temperature at 170℃.(Atten: Tim&temperature is complex so do not press any additional operation except set time and temperature) 4.Turn on power,when heating time reach the setted time, the alarm will alarm. Then turn off the temperature and time switch. Wait about 10secs and open the handle, take out the mug and peel the paper immediately. (Atten:do not baking without mug) 5.in order to protect the heating mat, Please put a mug in heating mat and close the handle when you donot use machine in a long time. Problems and solutions of the machine: Problems: The power light is off when you turn the power switch Hardly to adjust the pressure Mug mat don’t heating up Solutions the power connect was loose or the fuse was burned add some lube oil problems of temp controller or then electronic don’t work or mug mat broken Problems and solutions of the transfer result: phenomena light color image faintness light color for some parts image faintness in some parts paper adhered Reason time is too short time is too long so the the ink was diffused not enough of pressure or the coating of mug is uneven the heating mat’s problem heating time is too long or the coating is no dry solutions add the time reduce the time add pressure/change the mugs change the heating mat reduce the time and temp /change the mug Want to transfer the image on the pottery materials ,the temp shall be at 180-200℃ ,time shall be 200-300secs Using sublimation ink,and using inkjet paper The DPI of the image shall be higher than 300DPI,flip horizontal of the image Don’t heating up when there is no mug,otherwise the mug mat will be damaged!!! Set up the temp and time Adjust pressure,put the mug in the mug mat,then close the handle,turn on power and time switch press-or+ button to set temp you need。 (usually 170-220℃) Press -or+ button to set time you need(usually 23 minutes) Setting temp Setting time Temp clock Time clock Then turn on time switch to heating up.