Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
STANDARD EQUIPMENT: •Strong front-harrow for mounting in front of the front levelling bar, by this a tine spacing of 6.4 cm •Spring-Board levelling bar in front (requires a double-acting oil outlet) •Spring-Board after-harrow •Long finger after-harrow •Flat bar roller ø400 mm incl. long finger afterharrow (not possible on 10 m models) •Spring-tine eradicator set with 2x4 tines •Lights Euro-Tiller is standard As extra equipment Euro-Tiller can be A spare wheel is mounted with two-point pivoting crossbar mounted on all Euro- with pivotal towing eye. or ø80 mm ball hitch. Tiller harrows. TECHNICAL SPECIFICATIONS: Model No of tines Tine spacing Power req., HP 6.00 m Standard 69 pcs. 8.5 cm 120 + 7.00 m Standard 82 pcs. 8.5 cm 150 + 8.00 m Standard 94 pcs. 8.5 cm 175 + 106 pcs. 8.5 cm 200 + 106 pcs. 8.5 cm 10.00 m Standard 118 pcs. 8.5 cm 9.00 m Standard with 3 m middle section 9.00 m Standard with 4 m middle section No of oil outlets 2 doubleacting 2 doubleacting 2 doubleacting Transport Transport height width 2.80 m 3.00 m 3.30 m 3.00 m 3.80 m 3.00 m 2 doubeacting 4.30 m 3.00 m 200 + 2 doubleacting 3.80 m 4.00 m 225 + 2 doubleacting 4.30 m 4.00 m 9 8 0 0 1 1 5 8 . DE S IGN ED B Y M A R KS MA N INTERNATIONAL 9 DUDLEY ST, GRIMSBY, ENGLAND DN31 2AW. TEL: +44 ( 0) 1472 240869 P RINT E D IN D E N M A RK: w w w. mf. dk •Harrow with 6 rows of 10 x 45 mm tines •Wheel mounting (8 pcs.) 300/65x12 - 8 ply •Hydraulic depth adjustment •Central harrow depth control •Hydraulic folding with automatic transport lock •Spare wheel attached on the harrow •Pivotal towing eye EXTRA EQUIPMENT: YOUR LOCAL HE-VA DEALER N. A. Christensensvej 34 DK-7900 Nykøbing Mors Tel: +45 9772 4288 Fax: +45 9772 2112 Email: [email protected] Web: www.he-va.com Due to our policy of continual improvement we reserve the right to change specifications without notice. E. & O. E. EURO-TILLER STRONG FRONT-HARROW The strong front-harrow mounted before the front Spring-Board breaks the crust, and wheel tracks or compressed soil is loosened so that the levelling bar performs a more precise levelling of the already loosened soil and with a recuded energy consumption. When the Euro-Tiller is equipped with a strong front-harrow the average tine spacing is 6.4 cm. The aggressiveness (tine row angle) on the strong front-harrow is adjusted via spindles. SPRING-BOARD LEVELLING BAR By mounting a Spring-Board in front of the Euro-Tiller harrow, the field is perfectly levelled and the major clods are broken. The Spring-Board tine is a strong 10 x 80 mm spring tine, standard mounted with 8 x 150 mm point. The Spring-Board has hydr. adjustment of the working depth / aggressiveness, which can be adjusted during operation. Requires a double-acting oil outlet. Euro-Tiller models are designed for seedbed preparation on all soil types. The standard harrow has a solid 6 row frame in 60x60x5 cm sectional tubes. With the wide range of extra equipment, the Euro-Tiller can be constructed individually adapted for any farm and soil type. The harrow has the necessary weight and is equpped with all the necessary tools to obtain a perfect seedbed for grain, beets, maize, potatoes and other special crops. SPRING-BOARD AFTER HARROW Harrow tines - the strong 10 x 45 mm harrow tines ensure an optimal harrowing of all soil types. The standard harrow has a tine spacing of 8.5 cm. Equipped with the front-harrow, the average tine spacing is 6.4 cm. The Spring-Board after-harrow is connected to the front levelling bar and is hydraulically adjusted. The front and rear bars are independently adjustable by the connecting bar. The Spring-Board after-harrow is mounted behind the harrow section ensuring an effective levelling of the harrow tine tracks and a light consolidation. The vibrating tines break the last clods efficiently. The Spring-Board after-harrow can be mounted together with the long finger after-harrow. Transport position During transport the side sections are folded over into vertical position to obtain a safe and stable transport. A strong mechanical lock ensures safe movment of all units, and automatic unlocking occurs by means of the hydraulics. The strong hinge bracket for the side sections ensures high strength as well, when the harrow is in working position. FLAT BAR ROLLER A flat bar roller ø400 mm mounted with the long finger harrow in front leaves a pulverized and light consolidated surface. With its construction of 8 x 40 mm flat steel, this type of roller ensures a perfect soil structure. DEPTH CONTROL By means of a switch in the cabin, the driver can stop the electric depth stop. By this the driver can oversteer the depth stop and perform a deeper preparation - e.g. on the headlands. The harrow depth is easily adjusted centrally on the harrow (only one thumbscrew). Hereafter the electric depth stop ensures that the harrow depth is exactly the same each time after the harrow has been lifted up. The depth wheel master-slave hydraulic system guarantees a uniform working of the wheels. A scale on the right side section lets the driver see the exact working depth of the Spring-Board. The long finger after-harrow is mounted on the roller support arms, the angle and working depth of the tines is adjustable in relation to the roller. LONG FINGER AFTER-HARROW 8 large boogie wheels 300/65x12 ensure a precise working depth in all conditions. The solid long finger after-harrow mounted with strong 12 mm back bended tines never leaves anything in bulks and it erases the harrow tine tracks effectively. Both the pressure and the working angle is easily adjustable on the after-harrow to suit the individual soil conditions. EURO-TILLER