Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
The Clip Connector UGA-CLIP100 Underglow connectors are used to help you customize your Underglow display by using Cross, T Using theand Clip 90°Connector connectors. Be(UGA-CLIP100) sure to align strips with markings on connectors. The Clip Connector UGA-CLIP100 Underglow™ connectors are used to help you customize your Underglow™ display by using Cross, T and 90° connectors. Connector isyour designed to securely hold and join LED that strips. Each OnceThe youClip have finalized Underglow layout. Identify theclipped LED strips toconnector beCross, Thas Underglow youLED customize your Underglow display need by using its own set ofconnectors metal leads,are andused teeth to to help grip the strip. 1 1 cut, and together. Be to unplug Underglow fromCLIPPING its power supply before andclipped 90° connectors. Be sure sure alignORIGINAL strips with markings on OR connectors. ATTENTION! ALL RETURNS MUST BE INtoTHEIR CONDITION, CUTTINGThe UNDERGLOW™ VOIDS UGA-CL Clip Connector The Clip Connector UGA-CLIP100 cutting. RETURN POLICY Underglow connectors are used to help you customize your Un Underglow connectors are used to help you customize your Underglow display by usingthe Cross, T strips that need to be you have finalized your Underglow layout. Identify LED and 90° connectors. Be sure to align strips with m STEP 1)Once Finalizing the Layout and 90° connectors. Be sure to align strips with markings on connectors. Be sure layout, to unplug Underglow supply before Oncecut, you and haveclipped finalizedtogether. your Underglow™ identify the LED from strips its thatpower need to be cut, and clipped Once you have finalized your Underglow layout. Identi together. Once you have finalized your Underglow layout. Identify the LED strips that need to be cutting. The Underglow LED Strips can only becut, cutand along the leads, clipped together. Be sure to unplug Underglo NOTICE!: cut, and clipped together. Be sure to unplug Underglow from its power supply before ATTENTION! BE SURE TO DISCONNECT POWER BEFORE CUTTING LED STRIPS (designated here with a scissor clipping mark) cutting. cutting. 1 1 The Underglow™ LED strips can only be cut can along thebeleads. A ‘Scissor Clipping Mark’ The Underglow only cut along the leads, The Underglow LED Strips can onlyLED be cutStrips along the leads, The Underglow LED Strips c NOTICE!: NOTICE!: is placed(designated on every LED designating where to cut. mark) NOTICE!: (designated here with a scis here with strip, a scissor clipping mark) (designated here with a scissor clipping 2 Cut along the metal leads, seperating the LED strip. 2 2 STEP 2) Cutting Underglow™ Cut along the metal leads, seperating the LED strip. leads,length seperating Cut Underglow™ along the metal leads, to remove the excess LED strip, Cut andalong get the themetal desired for the LED strip. your layout. (Picturedthe Below) Cut along metal leads, seperating the LED strip. 2 33 Gently seperate the protective clear coating, from the white circuit ribbon, be careful seperate the protective coating, the white circuit ribbon, be toGently not expose LED light. clear Do not clipfrom excess clear coating atcareful this point. to not expose LED light. Do not clip excess clear coating at this point. 3 Gently seperate the protective clear coating, from th to not expose LED light. Do not clip excess clear coa STEP 3) Preparing LED Strip Leads Leads Gently separate the Underglow™ LED protective coating, from the white Gently on seperate the protective clear to coating, fromthe theLED white circuit ribbon, circuit ribbon, the clipped side. Be careful not expose Coating to notRight). expose LED Protective light. Do not clip excess clear coating at this point. light. (Pictured 3 4 4 Protective Coating ATTENTION! DO NOT CLIP EXCESS CLEARexposing COATING THISleads POINT. Unsnap the plastic latches on the connectors, theATmetal inside. be careful Leads Protective Coating 4 Unsnap theinside. plastic latches on the connectors, expos Takeplastic the LED strips you have prepared, and slide the strip underneath Unsnap the latches onLeads the connectors, exposing the metal leads STEP 4) Using the Clipleads, Connector the metal and plastic lip on the connector. Take the LED strips you have prepared, and Unsnap the plastic onstrips the connectors, exposing the metal Takelatches theconnector LED you have prepared, andteeth slide the strip underneath Clamp the lid once the LED strip is in place. The on leads. the metal leads, and plastic lip on the conn Protective Coating the willof secure the LED strip.Be that both strips are aligned Take the end the LED strip withsure the exposed leads, and slide the stripClamp underneath the lid metal thelid metal leads, and plastic lip on the connector. the connector once the LED strip before securing connector. leads,properly and the plastic lip on the connector. the lid will secure the LED strip.Be sure tha 4 5 5 6 Clamp the connector lid once the LED strip is in place. The teeth on properly before connector. Snap Teeth the connector lid back inLED place once the LED strip is in place. The teethinside. on the securing lid will secure Unsnap the plastic latches on the strip.Be connectors, exposing the metal leads the lid will Lip secure the sure that both strips are aligned Leads the LED strip to the connector. Teeth properly before securing connector. Take the LED strips prepared, and slideSECURING the stripCONNECTOR underneath ATTENTION! BE SURE THAT you BOTHhave STRIPS ARE ALIGNED BEFORE Leads Lip Side View the metal leads, and plastic lip on the connector. Teeth Leads Lip are secure, View on Once both LED strips and cut andthe remove excessis in place. The Side Clamp theconnector connector lid once LEDthestrip teeth protective clear coating, so that it is flush with the connector piece. the lid will secure the LED strip.Be sure that both strips are aligned Once both LED strips and connector are secure, cut properly before securing connector. Side View Upon completion, reconnect the power supply to test the new connection. If an LED protective clear coating, so that it is flush with the co 5 strip is unresponsive, insure that all metal leads are touching, and aligned correctly. 6 Teeth STEP 5)Once Removing Excess Coating both LED strips and connector are information secure, and cutinspiration! and removeUpon the completion, excess reconnect the power supply to tes Leads Lip please visit www.Continu.us/Underglow for more strip is unresponsive, insure that allso metal Onceprotective both LED strips and connector secure, cut and the piece. excess protective clear coating, it leads are clear coating, so thatare it is flush with theremove connector is flush with the connector piece. 6 5 please visit www.Continu.us/Underglow for more Side View reconnect the power supply to test the new connection. If an LED STEP 6)Upon Finalcompletion, Testing Uponstrip completion, the power to test theare new connection. an LED correctly. strip is unresponsive, is unresponsive, insure thatsupply all metal leads touching, andIfaligned Once both reconnect LED strips and connector are secure, cut and remove the excess insure that all metal leads are touching, and aligned correctly. protective clear coating, so that it is flush with the connector piece. please visit www.Continu.us/Underglow for more information and inspiration! www.continu.us Upon completion, reconnect the power supply to test the new connection. If an LED