Download 3NP Fuse Switch Disconnector – the Optimum Handle on Every

Selection and ordering data
3NP4 standard series
3NP4 standard series – Accessories
Accessories
Basic versions
For surface mounting and switchboard install.
Connection in mm2
160 A1)
160 A
Size 000
Size 00
250 A
400 A
630 A
Size
Size
Size
1.5 – 50
up to 2 x 70 (M8)
2.5 – 70
up to 150 (M10)
up to 240 (M12)
up to 2 x 240 (M12)
1
2
3
SIGUT terminal
Flat pad connection
SIGUT terminal
Flat pad connection
Flat pad connection
Flat pad connection
For 40 mm busbars2)
160 A1)
160 A
Size 000
Size 00
Flat pad connection
SIGUT terminal
250 A
Size
1
Flat pad connection
For 60 mm busbars
160 A1)
160 A
Size 000
Size 00
400 A
630 A
Size
Size
Size
1
2
3
With fuse monitoring
1.5 – 50
Connection, top
Connection, bottom
up to 2 x 70 (M8)
Connection, top
Connection, bottom
2.5 – 70
Connection, top
Connection, bottom
up to 150 (M10)
top or bottom3)
3NP4015 – 1CK01
3NP4015 – 1CJ01
3NP4075 – 1CE01
3NP4075 – 1CF01
3NP4075 – 1CK01
3NP4075 – 1CJ01
3NP4275– 1CG01
Connection in mm2
SIGUT terminal
Flat pad connection
SIGUT terminal
250 A
3NP4010 – 0CH10
3NP4070 – 0CA01
3NP4070 – 0CH01
3NP4270 – 0CA01
3NP4370 – 0CA10
3NP4470 – 0CA01
Connection in mm2
SIGUT terminal
Flat pad connection
Flat pad connection
Flat pad connection
By simply snapping onto the busbars from the top,
the disconnectors can also be mounted onto T or
double T profiles as well as onto Power-Line systems
from the Rittal company, without the horizontal parts
of the busbars preventing this.
1.5 – 50
Connection, top
Connection, bottom
3NP4016 – 1CK01
3NP4016 – 1CJ01
up to 2 x 70 (M8)
Connection, top
Connection, bottom
3NP4076 – 1CE01
3NP4076 – 1CF01
2.5 – 70
Connection, top
Connection, bottom
3NP4076 – 1CK01
3NP4076 – 1CJ01
up to 150 (M10)
top or bottom3)
3NP4276 – 1CG01
up to 240 (M12)
top or bottom3)
3NP4376 – 1CG01
up to 2 x 240 (M12)
top or bottom3)
3NP4476 – 1CG01
400 – 690 V AC, 220 V DC
all of the versions specified above (except size 000) are also available with mounted fuse
monitoring; Order No. supplement: 3NP4…–.F.01
1) 125 and 160 A only with special, 21-mm-wide fuses 3NY1822 and 3NY1824, refer to Accessories
2) Adapter depth, 28 mm; for disconnectors with deeper adapters (49 mm), refer to Catalog NSK, Section 12
3) Connection modules can be replaced, refer to the Instruction Manual
for 3NP401
Size 000
for 3NP407
Size 00
for 3NP42
Size 1
for 3NP43
Size 2
Connection terminals
(1 set = 3 units) connection:
integrated
integrated
3NY7120
70 – 150 mm2
3NY7130
3NY7140
120 – 240 mm2 150 – 300 mm2
Cable lug cover
(1 set = 3 units) safe from
finger touch cover of the flat
pad connection acc. to VBG4
not required
3NY7101
3NY7121
3NY7131
Auxiliary contact,
1 changeover contact
normal version
electronics-compatible
Quick retaining plate
to mount the disconnectors
between two mounting rails
(125 mm clearance)
3NY3035
3NY3030
3NY3035
3NY3030
3NY3035
3NY3030
3NY3035
3NY3030
3NY1995
3NY1995
3NY7322
–
–
3-phase busbars
for 2 disconnectors
for 3 disconnectors
for 4 disconnectors
connecting buses
for > 4 disconnectors
cap for empty location (20x units):
Incoming supply terminal
(1 set = 3 units) for conductors e/m: up to 95 mm2
finely stranded with end
sleeves: up to 70 mm2
Masking frames
for mounting in general
distribution systems
for disconnectors with
SIGUT terminal
for disconnectors with
flat pad connection
Dimensions (H x W):
Overreach protection
(10 units)
The circuit-breaker is connected in parallel to the
three main disconnector phases, and is tripped as
soon as at least one of three fuses blows. The voltage
is tapped at the handle lugs of the fuses which means
that only fuses with live grip lugs can be used.
not required
break-off
3NY7381
not required
3NY7381
not required
not possible
not required
3NY7102
3NY7102
–
–
–
–
3NY7105
–
–
–
3NY1237
3NY1238
3NY1438
–
–
–
–
–
–
–
–
–
–
–
–
3NY1263
3NY1265
–
–
–
–
–
–
–
–
3NY1236
–
–
–
–
integrated
–
–
–
–
–
–
–
–
integrated
3NY7482
3NY7482
3NY7482
3NY1251
3NY7200
–
–
–
–
215 x 130
3NY7201
215 x 130
3NY7220
375 x 220
3NY7230
375 x 245
3NY7240
375 x 290
integrated
integrated
3NY7481
3NY7481
3NY7481
for spare parts, refer to Catalog NSK, Section 12
for masking frames and mounting sets for 8HP molded-plastic distribution systems, refer to Catalog
E20001-8ZX1012-OHP54-5AB1
This button prevents the shock protection from
being inserted as long as the latching mechanism
hasn’t correctly latched into place.
Allaround safety
With the cable lug covers correctly
mounted, the enclosed disconnectors offer a high IP
30 degree of protection, even after a voltage test
using the 6 test holes in the withdrawable fuse carrier. The versions with SIGUT terminals are completely
safe from finger touch without any additional covers.
The large clear inspection window allows the type
and the operating statuses of the fuse links to be
quickly and reliably identified. Overreach and reacharound touch protection is already integrated into
the withdrawable fuse carrier up to 160 A; from
Size 1 shock protection is available as accessory.
At home on all busbars
All 3NP4 sizes are available for 40 mm or 60 mm
busbar center clearance. Busbars can either be 5 or
10 mm wide. For 10 mm busbars, for sizes 000 and
00, two lugs must be broken off at the three rear
busbar clamps. Busbar compensation is available
as accessory for mounting sizes 1 and 2 onto 5 mm
busbars (size 3 disconnectors cannot only be
snapped onto 5 mm busbars).
Quickly mounted …
All of these features reduce valuable mounting
and installation time. It also means that the correct
tightening torque of the screws doesn’t have to be
checked and adjusted. The mounting rail latching
mechanisms, integrated into the basic size 000 and
00 devices, also provide a clear financial benefit,
especially, where up to 160 A disconnectors are used
in larger unit quantities: additional screws, hooks,
intermediate plates or a second mounting rail are
not required.
Smart accessories for every
application
The auxiliary contacts, which fit all sizes, can be
subsequently retrofitted without taking up any
extra space.
The three-way terminal makes it easy to connect
up to 3 cables (e. g. for capacitor protection).
Several disconnectors can be fed in parallel using
the 3-phase busbars, connecting buses and feeder
terminals up to 225 A. Numerous masking frames
and mounting sets for SIKUS distribution boards or
the 8HP distribution system guarantee simple engineering and fast mounting and installation.
3NP Fuse Switch Disconnector –
the Optimum Handle on Every Application
1NO/1NC signal outputs are used as standard. For
size 00, they are brought out to a connector socket
at the front, and for sizes 1 to 3, as double AMP flat
connector at the shock protection in the lower section
of the disconnector.
Either pre-assembled 1- or 3-m cables with strain
relief can be used as connecting cable for size 00.
These can then be easily inserted at the fuse monitoring using the mounted connectors. There are also
connector mounting sets for crimping (short-circuit
proof) cables.
3NP4 – quickly mounted onto all busbars
Fuse links, size 000
21 mm wide, Duty class gL/gC
400 V/125 A
3NY1822
400 V/160 A
3NY1824
Sealing pin
can be retrofitted
(1 pkg. = 10 units)
can frequently occur, e. g. in line supplies with AC
drive converters and inverters.
Intelligent latching mechanism
This automatically adapts itself to busbar widths
between 5 and 30 mm, and it reliably latches into
place. This eliminates numerous versions and
complicated adjustments before mounting. There
is a small red button inside the switch, which,
especially from size 1, ensures that the disconnector
is really mounted onto the busbar to its endstop.
3NY7141
3NY3035
3NY3030
Busbar width compensation
only for 5 mm busbars
not required
for 10 mm busbars
break-off
Three-way terminal
(1 set = 3 units) to connect
3 x 2.5 – 16 mm2 (e/m) or
3 x 2.5 – 10 mm2 (finely
stranded with end sleeves)
for mounting onto a
SIGUT terminal
for mounting onto a
flat pad connection
for 3NP44
Size 3
Fuse monitoring for 3NP4
From size NH00 onwards, all of the 3NP4 versions are
also available with fuse monitoring. This is realized
using 3RV SIRIUS circuit-breakers which are mounted
at the front in the center of the fuse carrier.
Flat connectors are always used for sizes 1–3.
The disconnector can then be fed as required from
either the top or the bottom, whereby voltages up to
690 V AC/220 V DC are possible. Furthermore, this
type of fuse monitoring is completely insensitive to
EMC disturbances and harmonics. These disturbances
The function of the 3RV can be tested at any time
using the test button provided.
Technical data
Type
Rated operational voltage Ue
3NP401
AC 50/60 Hz V
DC V
3NP40 7
3NP42
3NP43
3NP44
690
690
220 (3 phases in series)
440 (2 phases in series)
with mounted fuse monitoring upt to 220 V DC max.
Rated conditional short-circuit current with fuses
(for fast closing)
With fuse links
rated current
Size/A
For 400 V AC (690 V)
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
000/100 (35) 00/160
50 (50)
50
11 (5)
15
1/250
50
25
2/400
50
35
3/630
50
55
Short-circuit strength with fuse
(with the disconnector closed)
With fuse links
rated current
Size/A
Up to 690 V
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
000/100
100
15
00/160
50
15
1/250
50
25
2/400
50
35
3/630
50
55
Rated operational current and switching capacity
(supply from either the top or bottom)
For 400 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35) A (RMS value)
Rated operating current Ie for AC-21B, AC-22B
A
AC-23B
A
000
800
160
100
00
800
160
100
1
2,000
250
250
2
3,200
400
400
3
5,040
630
630
For 690 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35) A (RMS value)
Rated operating current Ie for AC-21B
A
AC-22B
A
AC-23B
A
000
240
160
50
25
00
240
160
50
25
1
375
250
–
–
2
600
400
–
–
3
945
630
–
–
for additional values, refer to Catalog NSK, Section 12 (e. g. capacitor and DC switching capacity, switching capacity
at 500 V AC, ...)
sentric
can also be safely handled, favorably-priced backup protection, simple selectivity calculations and absolute reliability, even when short-circuits occur. The fuse
3NP5 – the rugged types for
the toughest applications
melts completely so that there is no residual risk as a result of contacts which
may have welded together. When the disconnector is in the open position,
Furthermore, 3NP5 have an extremely high AC-23
switching capacity. The switching gases which are
formed are deflected into the disconnector using a
sophisticated arc chamber design, instead of being
discharged upwards and to the side. This means
that operating personnel and plant sections and
components in the vicinity are reliably protected.
there is a visible isolating gap, which is often demanded, e. g. for maintenance
purposes. And the optional mounted fuse monitoring offers additional security
– fuse switch disconnectors 3NP for the highest plant availability and safety.
Fuse monitoring:
To allow monitoring of the fuses in the disconnectors,
a permanently wired 3RV1 circuit-breaker is mounted
on the fuse carrier.
Fuses for your safety –
3NP4 and 3NP5 switch disconnectors
ble to use other disconnectors available on the market. But the fast closing and arc deflection chambers
of the 3NP5 come through with flying colors. 3NP5
provides the highest degree of safety for operating
personnel and the plant, as main switch with high
switching frequency and good AC-23 characteristics,
e.g. for motor loads.
Both of these ranges are climate-proof and correspond to IEC 60 947-3 and VDE 0660, Part 107.
The fuses can be clearly identified through the large
clear inspection window.
Matching masking frames and complete, TSK-tested
mounting sets are available both for the moldedplastic 8HP distribution system as well as for the
various SIKUS distribution boards.
2 series in the range – the optimum handle on
every application
The 3NP4 series (sizes NH000 to NH3) offer the
optimum solution for most applications. These range
from power distribution in residential and commercial buildings, through flexible distribution stations
up to power distribution systems in large industrial
plants.They are also admirably suited as main and
incoming feeder breakers in industry, for control
systems, as well as in motor feeders or as backup
protection for circuit-breakers. They have an integrated
lug for sealing which is integrated as standard.
This means that they can be used, without any
restrictions, in meter cabinets and incoming main
feeder boxes for buildings.
The rugged 3NP5 series (sizes NH00 to NH3)
provide reliable protection for all of the “tougher”
applications. This is especially true in mining, in the
steel industry, and also in the chemical industry,
where sulphur-laden, or aggressive ambient conditions or hazardous locations make it almost impossi-
The values for switching capacitors (e.g. for reactive
power compensation) were also tested (refer to
Catalog NSK, Section 12), and when used with SITOR
semiconductor or 3NE1 double-protection fuses,
3NP disconnectors can be used to protect soft starters,
AC drive converters and similar devices (tables with
tested device-fuse combinations are provided in the
NSK). Shock and vibration testing as well as special
earthquake tests guarantee that the 3NP can be used
in marine applications, nuclear power stations and
similar safety-critical plants.
high switching frequency for devices such as these.
The erosion electrodes additionally extend the lifetime of the main contacts. The lateral spring mechanism (= fast switching) eliminates any danger as
a result of incorrect operation, e.g. briefly actuating
the disconnector or switching which is too slow.
When the switch disconnector is in the ON position,
the circuit-braker poles are connected in parallel
with the fuses to be monitored. When the switch is
in the OFF position, the poles of the circuit-breaker
are dead.
The 3NP5 disconnector series (sizes NH00 to NH3)
for fixed installation can be quickly hung onto preinstalled mounting bolts. They can also be mounted
on the front of switchgear panels using the matching mounting sets or they can be mounted onto
60 mm busbar systems using 8US1 adapters.
The especially rugged design of this series (plastic
with a high resistance to heat, metal parts which can
be mechanically stressed), permits an unusually
The internal resistance of the circuit-breaker is so
high that it does not affect the protection given by
the monitored fuses.
Rated operational voltage Ue
Electronic fuse monitoring (EFM):
The electronic fuse monitoring system is also
mounted on the fuse carrier of the 3NP5. It works
whether or not a load is present. Fuse blowing can
be signalled to a switch control room by means of a
group indication (2NO contacts + 1NC contact).
2
For surface mounting and switchboard install. in mm
Auxiliary contacts
160 A
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
250 A
Size 00
Size 1
Flat pad connection
2.5 – 120
Clamp connection
2.5 – 50
Flat pad connection
Clamp connection
Short-circuit strength with fuse
(with the disconnector closed)
With fuse links
rated current
Size/A
For 500 V AC
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
Rated operating current and switching capacity
(supply from either the top or bottom)
For 400 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35)
A (RMS value)
Rated operating current Ie for AC-21B up to AC-23B
A
For 690 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35)
A (RMS value)
Rated operating current Ie for AC-21B, AC-22B
A
AC-23B
A
35 – 120
400 A
Size 2
Flat pad connection
6 – 240
630 A
Size 3
Flat pad connection
6 – 2 x 240
160 A
Size 00
in mm2
Auxiliary contacts
Flat pad connection
at the bottom
2.5 – 120
Clamp connection
at the bottom
2.5 – 50
without
1NO/1NC
without
1NO/1NC
3NP5065 – 1CF00
3NP5065 – 1CF10
3NP5065 – 1CG00
3NP5065 – 1CG10
400 – 690 V AC, 220 V DC
For surface mounting and switchboard install. in mm2
Auxiliary contacts2)
160 A
Size 00
Flat pad connection
Clamp connection
2.5 – 120
2.5 – 50
1NO/1NC
1NO/1NC
3NP5060 – 0EA86
3NP5060 – 0EB86
3NP54
250 A
Size 1
Flat pad connection
Clamp connection
6 – 150
35 – 120
1NO/1NC
1NO/1NC
3NP5260 – 0EA86
3NP5260 – 0EB86
690
440 (3 phases in series)
220 (2 phases in series with mounted fuse monitoring)
400 A
630 A
Size 2
Size 3
Flat pad connection
Flat pad connection
1NO/1NC
1NO/1NC
3NP5360 – 0EA86
3NP5460 – 0EA86
3NP52
3NP53
1)
Rated conditional short-circuit current with fuses
With fuse links
rated current
Size/A
For 500 V AC
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
6 – 150
3NP5060 – 0CA00
3NP5060 – 0CA00
3NP5060 – 0CB00
3NP5060 – 0CB10
3NP5260 – 0CA00
3NP5260 – 0CA10
3NP5260 – 0CB00
3NP5260 – 0CB10
3NP5360 – 0CA00
3NP5360 – 0CA10
3NP5460 – 0CA00
3NP5460 – 0CA10
With fuse monitoring
3NP50
50/60 Hz V AC
V DC
Basic versions
For 40 mm busbars1)
Technical data
Type
Selection and ordering data
3NP5 high end series
2
For 40 mm busbars
00/160
50
15
00/160
100
23
00
1,600
160
00
800
160
100
1/250 2/400 3/630
50
50
50
25
40
50
160 A
for additional values refer to Catalog NSK, Section 12
(e. g. capacitor and DC switching capacity, switching capacity at 500 V AC, …)
0
1,600
160
0
1,000
160
125
2
4,000
400
2
2,520
400
315
Flat pad connection
at the bottom
Clamp connection
at the bottom
Auxiliary contacts
2.5 –120
1NO/1NC
3NP5065 – 1EF86
2.5 – 50
1NO/1NC
3NP5065 – 1EG86
400/500 V AC
2
1
2,500
250
1
1,600
250
200
3
5,040
630
3
3,200
630
400
2
4,000
400
2
2,520
400
315
2)
in mm
With electronic fuse monitoring
1/250 2/400 3/630
100
50
50
32
40
60
1
2,500
250
1
1,280
250
160
Size 00
6 – 240
6 – 2 x 240
For surface mounting and switchboard install. in mm
Auxiliary contacts
160 A
Size 00
Flat pad connection
Clamp connection
1NO/1NC
1NO/1NC
3NP5060 – 0HA13
3NP5060 – 0HB13
250 A
400 A
630 A
Size 1
Size 2
Size 3
Flat pad connection
Flat pad connection
Flat pad connection
1NO/1NC
1NO/1NC
1NO/1NC
3NP5260 – 0HA13
3NP5360 – 0HA13
3NP5460 – 0HA13
For 40 mm busbars1)
160 A
Size 00 at
Flat pad connection
the bottom
2.5 –120
2.5 – 50
6 – 150
6 – 240
6 – 2 x 240
in mm2
Auxiliary contacts
2.5 – 120
1NO/1NC
3NP5065 – 1HF13
1) for mounting on 60 mm busbars, use devices “for surface mounting and installation” and 8US1 busbar adapters
2) optionally, 2 NO as signal outputs: Order No. 3NP5…–.E.26
3NP5 high end series – Accessories
Accessories
for 3NP50
Size 00
for 3NP52
Size 1
for 3NP53
Size 2
for 3NP54
Size 3
Clamp connection
(1 set = 3 units)
3NY1903
2.5 – 50 mm2
3NY1907
35 – 120 mm2
–
–
Quick retaining plate
between 2 mounting
rails
3NY1995
–
–
–
Adapter
for mounting
on 60 mm
busbars
8US1291-4SB00
8US1210-4AG00
8US1210-4AG00
8US1210-4AG00
3NY1105
215 x 135
–
–
–
3NY1115
215 x 135
–
–
–
3NY1107
265 x 135
–
–
–
3NY1208
250 x 149
3NY1210
300 x 220
3NY1211
300 x 245
3NY1212
300 x 290
3NY1106
290 x 135
–
–
–
3NY1116
290 x 135
–
–
–
3NY1108
–
–
–
–
3NY1241
3NY1245
3NY1245
Auxiliary contacts
1NO/1NC
(= mounting set)
3NY3033
3NY3034
3NY3034
3NY3034
Sealing lug
can be retrofitted
(1 pkg. = 10 units)
3NY1940
–
–
–
Molded-plastic
masking frames
Dimensions (H x W):
for disconnectors
without/with auxiliary
contacts
Dimensions (H x W):
for disconnectors
with auxiliary contacts
Dimensions (H x W):
Masking frame
mounting set
Dimensions (H x W):
for mounting the disconnector in the front of
the switchgear panel
(masking frame and
mounting parts)
Cable lug cover
Masking frame (H x W)
for disconnectors without/
with auxiliary contacts
Masking frame (H x W)
for disconnectors
with auxiliary contacts
2 separate covers for
top/bottom
6 individual covers
(L = 120 mm)
for spare parts, refer to Catalog NSK, Section 12
for masking frames and mounting sets for 8HP molded-plastic distribution systems, refer to Catalog
8ZX1012-OHP54-5AB1
for masking frames and mounting sets for SIKUS installation distribution panels, refer to Catalogs
I2.34 and 12.35
Subject to change without prior notice 08/02 | Bestell-Nr. EXXXXX-A190-PXXX | DISPO XXXXX | XXXXXXXXX PDWL.XX.X.XX WS 0802X.X | Printed in Germany
Fuses for overload and short-circuit protection means: high short-circuit currents
Siemens AG
Automation and Drives
Low Voltage Controls and Distribution
P. O. Box 32 40, D-91050 Erlangen
www.siemens.com/sentric
can also be safely handled, favorably-priced backup protection, simple selectivity calculations and absolute reliability, even when short-circuits occur. The fuse
3NP5 – the rugged types for
the toughest applications
melts completely so that there is no residual risk as a result of contacts which
may have welded together. When the disconnector is in the open position,
Furthermore, 3NP5 have an extremely high AC-23
switching capacity. The switching gases which are
formed are deflected into the disconnector using a
sophisticated arc chamber design, instead of being
discharged upwards and to the side. This means
that operating personnel and plant sections and
components in the vicinity are reliably protected.
there is a visible isolating gap, which is often demanded, e. g. for maintenance
purposes. And the optional mounted fuse monitoring offers additional security
– fuse switch disconnectors 3NP for the highest plant availability and safety.
Fuse monitoring:
To allow monitoring of the fuses in the disconnectors,
a permanently wired 3RV1 circuit-breaker is mounted
on the fuse carrier.
Fuses for your safety –
3NP4 and 3NP5 switch disconnectors
ble to use other disconnectors available on the market. But the fast closing and arc deflection chambers
of the 3NP5 come through with flying colors. 3NP5
provides the highest degree of safety for operating
personnel and the plant, as main switch with high
switching frequency and good AC-23 characteristics,
e.g. for motor loads.
Both of these ranges are climate-proof and correspond to IEC 60 947-3 and VDE 0660, Part 107.
The fuses can be clearly identified through the large
clear inspection window.
Matching masking frames and complete, TSK-tested
mounting sets are available both for the moldedplastic 8HP distribution system as well as for the
various SIKUS distribution boards.
2 series in the range – the optimum handle on
every application
The 3NP4 series (sizes NH000 to NH3) offer the
optimum solution for most applications. These range
from power distribution in residential and commercial buildings, through flexible distribution stations
up to power distribution systems in large industrial
plants.They are also admirably suited as main and
incoming feeder breakers in industry, for control
systems, as well as in motor feeders or as backup
protection for circuit-breakers. They have an integrated
lug for sealing which is integrated as standard.
This means that they can be used, without any
restrictions, in meter cabinets and incoming main
feeder boxes for buildings.
The rugged 3NP5 series (sizes NH00 to NH3)
provide reliable protection for all of the “tougher”
applications. This is especially true in mining, in the
steel industry, and also in the chemical industry,
where sulphur-laden, or aggressive ambient conditions or hazardous locations make it almost impossi-
The values for switching capacitors (e.g. for reactive
power compensation) were also tested (refer to
Catalog NSK, Section 12), and when used with SITOR
semiconductor or 3NE1 double-protection fuses,
3NP disconnectors can be used to protect soft starters,
AC drive converters and similar devices (tables with
tested device-fuse combinations are provided in the
NSK). Shock and vibration testing as well as special
earthquake tests guarantee that the 3NP can be used
in marine applications, nuclear power stations and
similar safety-critical plants.
high switching frequency for devices such as these.
The erosion electrodes additionally extend the lifetime of the main contacts. The lateral spring mechanism (= fast switching) eliminates any danger as
a result of incorrect operation, e.g. briefly actuating
the disconnector or switching which is too slow.
When the switch disconnector is in the ON position,
the circuit-braker poles are connected in parallel
with the fuses to be monitored. When the switch is
in the OFF position, the poles of the circuit-breaker
are dead.
The 3NP5 disconnector series (sizes NH00 to NH3)
for fixed installation can be quickly hung onto preinstalled mounting bolts. They can also be mounted
on the front of switchgear panels using the matching mounting sets or they can be mounted onto
60 mm busbar systems using 8US1 adapters.
The especially rugged design of this series (plastic
with a high resistance to heat, metal parts which can
be mechanically stressed), permits an unusually
The internal resistance of the circuit-breaker is so
high that it does not affect the protection given by
the monitored fuses.
Rated operational voltage Ue
Electronic fuse monitoring (EFM):
The electronic fuse monitoring system is also
mounted on the fuse carrier of the 3NP5. It works
whether or not a load is present. Fuse blowing can
be signalled to a switch control room by means of a
group indication (2NO contacts + 1NC contact).
2
For surface mounting and switchboard install. in mm
Auxiliary contacts
160 A
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
250 A
Size 00
Size 1
Flat pad connection
2.5 – 120
Clamp connection
2.5 – 50
Flat pad connection
Clamp connection
Short-circuit strength with fuse
(with the disconnector closed)
With fuse links
rated current
Size/A
For 500 V AC
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
Rated operating current and switching capacity
(supply from either the top or bottom)
For 400 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35)
A (RMS value)
Rated operating current Ie for AC-21B up to AC-23B
A
For 690 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35)
A (RMS value)
Rated operating current Ie for AC-21B, AC-22B
A
AC-23B
A
35 – 120
400 A
Size 2
Flat pad connection
6 – 240
630 A
Size 3
Flat pad connection
6 – 2 x 240
160 A
Size 00
in mm2
Auxiliary contacts
Flat pad connection
at the bottom
2.5 – 120
Clamp connection
at the bottom
2.5 – 50
without
1NO/1NC
without
1NO/1NC
3NP5065 – 1CF00
3NP5065 – 1CF10
3NP5065 – 1CG00
3NP5065 – 1CG10
400 – 690 V AC, 220 V DC
For surface mounting and switchboard install. in mm2
Auxiliary contacts2)
160 A
Size 00
Flat pad connection
Clamp connection
2.5 – 120
2.5 – 50
1NO/1NC
1NO/1NC
3NP5060 – 0EA86
3NP5060 – 0EB86
3NP54
250 A
Size 1
Flat pad connection
Clamp connection
6 – 150
35 – 120
1NO/1NC
1NO/1NC
3NP5260 – 0EA86
3NP5260 – 0EB86
690
440 (3 phases in series)
220 (2 phases in series with mounted fuse monitoring)
400 A
630 A
Size 2
Size 3
Flat pad connection
Flat pad connection
1NO/1NC
1NO/1NC
3NP5360 – 0EA86
3NP5460 – 0EA86
3NP52
3NP53
1)
Rated conditional short-circuit current with fuses
With fuse links
rated current
Size/A
For 500 V AC
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
6 – 150
3NP5060 – 0CA00
3NP5060 – 0CA00
3NP5060 – 0CB00
3NP5060 – 0CB10
3NP5260 – 0CA00
3NP5260 – 0CA10
3NP5260 – 0CB00
3NP5260 – 0CB10
3NP5360 – 0CA00
3NP5360 – 0CA10
3NP5460 – 0CA00
3NP5460 – 0CA10
With fuse monitoring
3NP50
50/60 Hz V AC
V DC
Basic versions
For 40 mm busbars1)
Technical data
Type
Selection and ordering data
3NP5 high end series
2
For 40 mm busbars
00/160
50
15
00/160
100
23
00
1,600
160
00
800
160
100
1/250 2/400 3/630
50
50
50
25
40
50
160 A
for additional values refer to Catalog NSK, Section 12
(e. g. capacitor and DC switching capacity, switching capacity at 500 V AC, …)
0
1,600
160
0
1,000
160
125
2
4,000
400
2
2,520
400
315
Flat pad connection
at the bottom
Clamp connection
at the bottom
Auxiliary contacts
2.5 –120
1NO/1NC
3NP5065 – 1EF86
2.5 – 50
1NO/1NC
3NP5065 – 1EG86
400/500 V AC
2
1
2,500
250
1
1,600
250
200
3
5,040
630
3
3,200
630
400
2
4,000
400
2
2,520
400
315
2)
in mm
With electronic fuse monitoring
1/250 2/400 3/630
100
50
50
32
40
60
1
2,500
250
1
1,280
250
160
Size 00
6 – 240
6 – 2 x 240
For surface mounting and switchboard install. in mm
Auxiliary contacts
160 A
Size 00
Flat pad connection
Clamp connection
1NO/1NC
1NO/1NC
3NP5060 – 0HA13
3NP5060 – 0HB13
250 A
400 A
630 A
Size 1
Size 2
Size 3
Flat pad connection
Flat pad connection
Flat pad connection
1NO/1NC
1NO/1NC
1NO/1NC
3NP5260 – 0HA13
3NP5360 – 0HA13
3NP5460 – 0HA13
For 40 mm busbars1)
160 A
Size 00 at
Flat pad connection
the bottom
2.5 –120
2.5 – 50
6 – 150
6 – 240
6 – 2 x 240
in mm2
Auxiliary contacts
2.5 – 120
1NO/1NC
3NP5065 – 1HF13
1) for mounting on 60 mm busbars, use devices “for surface mounting and installation” and 8US1 busbar adapters
2) optionally, 2 NO as signal outputs: Order No. 3NP5…–.E.26
3NP5 high end series – Accessories
Accessories
for 3NP50
Size 00
for 3NP52
Size 1
for 3NP53
Size 2
for 3NP54
Size 3
Clamp connection
(1 set = 3 units)
3NY1903
2.5 – 50 mm2
3NY1907
35 – 120 mm2
–
–
Quick retaining plate
between 2 mounting
rails
3NY1995
–
–
–
Adapter
for mounting
on 60 mm
busbars
8US1291-4SB00
8US1210-4AG00
8US1210-4AG00
8US1210-4AG00
3NY1105
215 x 135
–
–
–
3NY1115
215 x 135
–
–
–
3NY1107
265 x 135
–
–
–
3NY1208
250 x 149
3NY1210
300 x 220
3NY1211
300 x 245
3NY1212
300 x 290
3NY1106
290 x 135
–
–
–
3NY1116
290 x 135
–
–
–
3NY1108
–
–
–
–
3NY1241
3NY1245
3NY1245
Auxiliary contacts
1NO/1NC
(= mounting set)
3NY3033
3NY3034
3NY3034
3NY3034
Sealing lug
can be retrofitted
(1 pkg. = 10 units)
3NY1940
–
–
–
Molded-plastic
masking frames
Dimensions (H x W):
for disconnectors
without/with auxiliary
contacts
Dimensions (H x W):
for disconnectors
with auxiliary contacts
Dimensions (H x W):
Masking frame
mounting set
Dimensions (H x W):
for mounting the disconnector in the front of
the switchgear panel
(masking frame and
mounting parts)
Cable lug cover
Masking frame (H x W)
for disconnectors without/
with auxiliary contacts
Masking frame (H x W)
for disconnectors
with auxiliary contacts
2 separate covers for
top/bottom
6 individual covers
(L = 120 mm)
for spare parts, refer to Catalog NSK, Section 12
for masking frames and mounting sets for 8HP molded-plastic distribution systems, refer to Catalog
8ZX1012-OHP54-5AB1
for masking frames and mounting sets for SIKUS installation distribution panels, refer to Catalogs
I2.34 and 12.35
Subject to change without prior notice 08/02 | Bestell-Nr. EXXXXX-A190-PXXX | DISPO XXXXX | XXXXXXXXX PDWL.XX.X.XX WS 0802X.X | Printed in Germany
Fuses for overload and short-circuit protection means: high short-circuit currents
Siemens AG
Automation and Drives
Low Voltage Controls and Distribution
P. O. Box 32 40, D-91050 Erlangen
www.siemens.com/sentric
can also be safely handled, favorably-priced backup protection, simple selectivity calculations and absolute reliability, even when short-circuits occur. The fuse
3NP5 – the rugged types for
the toughest applications
melts completely so that there is no residual risk as a result of contacts which
may have welded together. When the disconnector is in the open position,
Furthermore, 3NP5 have an extremely high AC-23
switching capacity. The switching gases which are
formed are deflected into the disconnector using a
sophisticated arc chamber design, instead of being
discharged upwards and to the side. This means
that operating personnel and plant sections and
components in the vicinity are reliably protected.
there is a visible isolating gap, which is often demanded, e. g. for maintenance
purposes. And the optional mounted fuse monitoring offers additional security
– fuse switch disconnectors 3NP for the highest plant availability and safety.
Fuse monitoring:
To allow monitoring of the fuses in the disconnectors,
a permanently wired 3RV1 circuit-breaker is mounted
on the fuse carrier.
Fuses for your safety –
3NP4 and 3NP5 switch disconnectors
ble to use other disconnectors available on the market. But the fast closing and arc deflection chambers
of the 3NP5 come through with flying colors. 3NP5
provides the highest degree of safety for operating
personnel and the plant, as main switch with high
switching frequency and good AC-23 characteristics,
e.g. for motor loads.
Both of these ranges are climate-proof and correspond to IEC 60 947-3 and VDE 0660, Part 107.
The fuses can be clearly identified through the large
clear inspection window.
Matching masking frames and complete, TSK-tested
mounting sets are available both for the moldedplastic 8HP distribution system as well as for the
various SIKUS distribution boards.
2 series in the range – the optimum handle on
every application
The 3NP4 series (sizes NH000 to NH3) offer the
optimum solution for most applications. These range
from power distribution in residential and commercial buildings, through flexible distribution stations
up to power distribution systems in large industrial
plants.They are also admirably suited as main and
incoming feeder breakers in industry, for control
systems, as well as in motor feeders or as backup
protection for circuit-breakers. They have an integrated
lug for sealing which is integrated as standard.
This means that they can be used, without any
restrictions, in meter cabinets and incoming main
feeder boxes for buildings.
The rugged 3NP5 series (sizes NH00 to NH3)
provide reliable protection for all of the “tougher”
applications. This is especially true in mining, in the
steel industry, and also in the chemical industry,
where sulphur-laden, or aggressive ambient conditions or hazardous locations make it almost impossi-
The values for switching capacitors (e.g. for reactive
power compensation) were also tested (refer to
Catalog NSK, Section 12), and when used with SITOR
semiconductor or 3NE1 double-protection fuses,
3NP disconnectors can be used to protect soft starters,
AC drive converters and similar devices (tables with
tested device-fuse combinations are provided in the
NSK). Shock and vibration testing as well as special
earthquake tests guarantee that the 3NP can be used
in marine applications, nuclear power stations and
similar safety-critical plants.
high switching frequency for devices such as these.
The erosion electrodes additionally extend the lifetime of the main contacts. The lateral spring mechanism (= fast switching) eliminates any danger as
a result of incorrect operation, e.g. briefly actuating
the disconnector or switching which is too slow.
When the switch disconnector is in the ON position,
the circuit-braker poles are connected in parallel
with the fuses to be monitored. When the switch is
in the OFF position, the poles of the circuit-breaker
are dead.
The 3NP5 disconnector series (sizes NH00 to NH3)
for fixed installation can be quickly hung onto preinstalled mounting bolts. They can also be mounted
on the front of switchgear panels using the matching mounting sets or they can be mounted onto
60 mm busbar systems using 8US1 adapters.
The especially rugged design of this series (plastic
with a high resistance to heat, metal parts which can
be mechanically stressed), permits an unusually
The internal resistance of the circuit-breaker is so
high that it does not affect the protection given by
the monitored fuses.
Rated operational voltage Ue
Electronic fuse monitoring (EFM):
The electronic fuse monitoring system is also
mounted on the fuse carrier of the 3NP5. It works
whether or not a load is present. Fuse blowing can
be signalled to a switch control room by means of a
group indication (2NO contacts + 1NC contact).
2
For surface mounting and switchboard install. in mm
Auxiliary contacts
160 A
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
250 A
Size 00
Size 1
Flat pad connection
2.5 – 120
Clamp connection
2.5 – 50
Flat pad connection
Clamp connection
Short-circuit strength with fuse
(with the disconnector closed)
With fuse links
rated current
Size/A
For 500 V AC
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
Rated operating current and switching capacity
(supply from either the top or bottom)
For 400 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35)
A (RMS value)
Rated operating current Ie for AC-21B up to AC-23B
A
For 690 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35)
A (RMS value)
Rated operating current Ie for AC-21B, AC-22B
A
AC-23B
A
35 – 120
400 A
Size 2
Flat pad connection
6 – 240
630 A
Size 3
Flat pad connection
6 – 2 x 240
160 A
Size 00
in mm2
Auxiliary contacts
Flat pad connection
at the bottom
2.5 – 120
Clamp connection
at the bottom
2.5 – 50
without
1NO/1NC
without
1NO/1NC
3NP5065 – 1CF00
3NP5065 – 1CF10
3NP5065 – 1CG00
3NP5065 – 1CG10
400 – 690 V AC, 220 V DC
For surface mounting and switchboard install. in mm2
Auxiliary contacts2)
160 A
Size 00
Flat pad connection
Clamp connection
2.5 – 120
2.5 – 50
1NO/1NC
1NO/1NC
3NP5060 – 0EA86
3NP5060 – 0EB86
3NP54
250 A
Size 1
Flat pad connection
Clamp connection
6 – 150
35 – 120
1NO/1NC
1NO/1NC
3NP5260 – 0EA86
3NP5260 – 0EB86
690
440 (3 phases in series)
220 (2 phases in series with mounted fuse monitoring)
400 A
630 A
Size 2
Size 3
Flat pad connection
Flat pad connection
1NO/1NC
1NO/1NC
3NP5360 – 0EA86
3NP5460 – 0EA86
3NP52
3NP53
1)
Rated conditional short-circuit current with fuses
With fuse links
rated current
Size/A
For 500 V AC
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
6 – 150
3NP5060 – 0CA00
3NP5060 – 0CA00
3NP5060 – 0CB00
3NP5060 – 0CB10
3NP5260 – 0CA00
3NP5260 – 0CA10
3NP5260 – 0CB00
3NP5260 – 0CB10
3NP5360 – 0CA00
3NP5360 – 0CA10
3NP5460 – 0CA00
3NP5460 – 0CA10
With fuse monitoring
3NP50
50/60 Hz V AC
V DC
Basic versions
For 40 mm busbars1)
Technical data
Type
Selection and ordering data
3NP5 high end series
2
For 40 mm busbars
00/160
50
15
00/160
100
23
00
1,600
160
00
800
160
100
1/250 2/400 3/630
50
50
50
25
40
50
160 A
for additional values refer to Catalog NSK, Section 12
(e. g. capacitor and DC switching capacity, switching capacity at 500 V AC, …)
0
1,600
160
0
1,000
160
125
2
4,000
400
2
2,520
400
315
Flat pad connection
at the bottom
Clamp connection
at the bottom
Auxiliary contacts
2.5 –120
1NO/1NC
3NP5065 – 1EF86
2.5 – 50
1NO/1NC
3NP5065 – 1EG86
400/500 V AC
2
1
2,500
250
1
1,600
250
200
3
5,040
630
3
3,200
630
400
2
4,000
400
2
2,520
400
315
2)
in mm
With electronic fuse monitoring
1/250 2/400 3/630
100
50
50
32
40
60
1
2,500
250
1
1,280
250
160
Size 00
6 – 240
6 – 2 x 240
For surface mounting and switchboard install. in mm
Auxiliary contacts
160 A
Size 00
Flat pad connection
Clamp connection
1NO/1NC
1NO/1NC
3NP5060 – 0HA13
3NP5060 – 0HB13
250 A
400 A
630 A
Size 1
Size 2
Size 3
Flat pad connection
Flat pad connection
Flat pad connection
1NO/1NC
1NO/1NC
1NO/1NC
3NP5260 – 0HA13
3NP5360 – 0HA13
3NP5460 – 0HA13
For 40 mm busbars1)
160 A
Size 00 at
Flat pad connection
the bottom
2.5 –120
2.5 – 50
6 – 150
6 – 240
6 – 2 x 240
in mm2
Auxiliary contacts
2.5 – 120
1NO/1NC
3NP5065 – 1HF13
1) for mounting on 60 mm busbars, use devices “for surface mounting and installation” and 8US1 busbar adapters
2) optionally, 2 NO as signal outputs: Order No. 3NP5…–.E.26
3NP5 high end series – Accessories
Accessories
for 3NP50
Size 00
for 3NP52
Size 1
for 3NP53
Size 2
for 3NP54
Size 3
Clamp connection
(1 set = 3 units)
3NY1903
2.5 – 50 mm2
3NY1907
35 – 120 mm2
–
–
Quick retaining plate
between 2 mounting
rails
3NY1995
–
–
–
Adapter
for mounting
on 60 mm
busbars
8US1291-4SB00
8US1210-4AG00
8US1210-4AG00
8US1210-4AG00
3NY1105
215 x 135
–
–
–
3NY1115
215 x 135
–
–
–
3NY1107
265 x 135
–
–
–
3NY1208
250 x 149
3NY1210
300 x 220
3NY1211
300 x 245
3NY1212
300 x 290
3NY1106
290 x 135
–
–
–
3NY1116
290 x 135
–
–
–
3NY1108
–
–
–
–
3NY1241
3NY1245
3NY1245
Auxiliary contacts
1NO/1NC
(= mounting set)
3NY3033
3NY3034
3NY3034
3NY3034
Sealing lug
can be retrofitted
(1 pkg. = 10 units)
3NY1940
–
–
–
Molded-plastic
masking frames
Dimensions (H x W):
for disconnectors
without/with auxiliary
contacts
Dimensions (H x W):
for disconnectors
with auxiliary contacts
Dimensions (H x W):
Masking frame
mounting set
Dimensions (H x W):
for mounting the disconnector in the front of
the switchgear panel
(masking frame and
mounting parts)
Cable lug cover
Masking frame (H x W)
for disconnectors without/
with auxiliary contacts
Masking frame (H x W)
for disconnectors
with auxiliary contacts
2 separate covers for
top/bottom
6 individual covers
(L = 120 mm)
for spare parts, refer to Catalog NSK, Section 12
for masking frames and mounting sets for 8HP molded-plastic distribution systems, refer to Catalog
8ZX1012-OHP54-5AB1
for masking frames and mounting sets for SIKUS installation distribution panels, refer to Catalogs
I2.34 and 12.35
Subject to change without prior notice 08/02 | Bestell-Nr. EXXXXX-A190-PXXX | DISPO XXXXX | XXXXXXXXX PDWL.XX.X.XX WS 0802X.X | Printed in Germany
Fuses for overload and short-circuit protection means: high short-circuit currents
Siemens AG
Automation and Drives
Low Voltage Controls and Distribution
P. O. Box 32 40, D-91050 Erlangen
www.siemens.com/sentric
can also be safely handled, favorably-priced backup protection, simple selectivity calculations and absolute reliability, even when short-circuits occur. The fuse
3NP5 – the rugged types for
the toughest applications
melts completely so that there is no residual risk as a result of contacts which
may have welded together. When the disconnector is in the open position,
Furthermore, 3NP5 have an extremely high AC-23
switching capacity. The switching gases which are
formed are deflected into the disconnector using a
sophisticated arc chamber design, instead of being
discharged upwards and to the side. This means
that operating personnel and plant sections and
components in the vicinity are reliably protected.
there is a visible isolating gap, which is often demanded, e. g. for maintenance
purposes. And the optional mounted fuse monitoring offers additional security
– fuse switch disconnectors 3NP for the highest plant availability and safety.
Fuse monitoring:
To allow monitoring of the fuses in the disconnectors,
a permanently wired 3RV1 circuit-breaker is mounted
on the fuse carrier.
Fuses for your safety –
3NP4 and 3NP5 switch disconnectors
ble to use other disconnectors available on the market. But the fast closing and arc deflection chambers
of the 3NP5 come through with flying colors. 3NP5
provides the highest degree of safety for operating
personnel and the plant, as main switch with high
switching frequency and good AC-23 characteristics,
e.g. for motor loads.
Both of these ranges are climate-proof and correspond to IEC 60 947-3 and VDE 0660, Part 107.
The fuses can be clearly identified through the large
clear inspection window.
Matching masking frames and complete, TSK-tested
mounting sets are available both for the moldedplastic 8HP distribution system as well as for the
various SIKUS distribution boards.
2 series in the range – the optimum handle on
every application
The 3NP4 series (sizes NH000 to NH3) offer the
optimum solution for most applications. These range
from power distribution in residential and commercial buildings, through flexible distribution stations
up to power distribution systems in large industrial
plants.They are also admirably suited as main and
incoming feeder breakers in industry, for control
systems, as well as in motor feeders or as backup
protection for circuit-breakers. They have an integrated
lug for sealing which is integrated as standard.
This means that they can be used, without any
restrictions, in meter cabinets and incoming main
feeder boxes for buildings.
The rugged 3NP5 series (sizes NH00 to NH3)
provide reliable protection for all of the “tougher”
applications. This is especially true in mining, in the
steel industry, and also in the chemical industry,
where sulphur-laden, or aggressive ambient conditions or hazardous locations make it almost impossi-
The values for switching capacitors (e.g. for reactive
power compensation) were also tested (refer to
Catalog NSK, Section 12), and when used with SITOR
semiconductor or 3NE1 double-protection fuses,
3NP disconnectors can be used to protect soft starters,
AC drive converters and similar devices (tables with
tested device-fuse combinations are provided in the
NSK). Shock and vibration testing as well as special
earthquake tests guarantee that the 3NP can be used
in marine applications, nuclear power stations and
similar safety-critical plants.
high switching frequency for devices such as these.
The erosion electrodes additionally extend the lifetime of the main contacts. The lateral spring mechanism (= fast switching) eliminates any danger as
a result of incorrect operation, e.g. briefly actuating
the disconnector or switching which is too slow.
When the switch disconnector is in the ON position,
the circuit-braker poles are connected in parallel
with the fuses to be monitored. When the switch is
in the OFF position, the poles of the circuit-breaker
are dead.
The 3NP5 disconnector series (sizes NH00 to NH3)
for fixed installation can be quickly hung onto preinstalled mounting bolts. They can also be mounted
on the front of switchgear panels using the matching mounting sets or they can be mounted onto
60 mm busbar systems using 8US1 adapters.
The especially rugged design of this series (plastic
with a high resistance to heat, metal parts which can
be mechanically stressed), permits an unusually
The internal resistance of the circuit-breaker is so
high that it does not affect the protection given by
the monitored fuses.
Rated operational voltage Ue
Electronic fuse monitoring (EFM):
The electronic fuse monitoring system is also
mounted on the fuse carrier of the 3NP5. It works
whether or not a load is present. Fuse blowing can
be signalled to a switch control room by means of a
group indication (2NO contacts + 1NC contact).
2
For surface mounting and switchboard install. in mm
Auxiliary contacts
160 A
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
250 A
Size 00
Size 1
Flat pad connection
2.5 – 120
Clamp connection
2.5 – 50
Flat pad connection
Clamp connection
Short-circuit strength with fuse
(with the disconnector closed)
With fuse links
rated current
Size/A
For 500 V AC
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
Rated operating current and switching capacity
(supply from either the top or bottom)
For 400 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35)
A (RMS value)
Rated operating current Ie for AC-21B up to AC-23B
A
For 690 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35)
A (RMS value)
Rated operating current Ie for AC-21B, AC-22B
A
AC-23B
A
35 – 120
400 A
Size 2
Flat pad connection
6 – 240
630 A
Size 3
Flat pad connection
6 – 2 x 240
160 A
Size 00
in mm2
Auxiliary contacts
Flat pad connection
at the bottom
2.5 – 120
Clamp connection
at the bottom
2.5 – 50
without
1NO/1NC
without
1NO/1NC
3NP5065 – 1CF00
3NP5065 – 1CF10
3NP5065 – 1CG00
3NP5065 – 1CG10
400 – 690 V AC, 220 V DC
For surface mounting and switchboard install. in mm2
Auxiliary contacts2)
160 A
Size 00
Flat pad connection
Clamp connection
2.5 – 120
2.5 – 50
1NO/1NC
1NO/1NC
3NP5060 – 0EA86
3NP5060 – 0EB86
3NP54
250 A
Size 1
Flat pad connection
Clamp connection
6 – 150
35 – 120
1NO/1NC
1NO/1NC
3NP5260 – 0EA86
3NP5260 – 0EB86
690
440 (3 phases in series)
220 (2 phases in series with mounted fuse monitoring)
400 A
630 A
Size 2
Size 3
Flat pad connection
Flat pad connection
1NO/1NC
1NO/1NC
3NP5360 – 0EA86
3NP5460 – 0EA86
3NP52
3NP53
1)
Rated conditional short-circuit current with fuses
With fuse links
rated current
Size/A
For 500 V AC
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
6 – 150
3NP5060 – 0CA00
3NP5060 – 0CA00
3NP5060 – 0CB00
3NP5060 – 0CB10
3NP5260 – 0CA00
3NP5260 – 0CA10
3NP5260 – 0CB00
3NP5260 – 0CB10
3NP5360 – 0CA00
3NP5360 – 0CA10
3NP5460 – 0CA00
3NP5460 – 0CA10
With fuse monitoring
3NP50
50/60 Hz V AC
V DC
Basic versions
For 40 mm busbars1)
Technical data
Type
Selection and ordering data
3NP5 high end series
2
For 40 mm busbars
00/160
50
15
00/160
100
23
00
1,600
160
00
800
160
100
1/250 2/400 3/630
50
50
50
25
40
50
160 A
for additional values refer to Catalog NSK, Section 12
(e. g. capacitor and DC switching capacity, switching capacity at 500 V AC, …)
0
1,600
160
0
1,000
160
125
2
4,000
400
2
2,520
400
315
Flat pad connection
at the bottom
Clamp connection
at the bottom
Auxiliary contacts
2.5 –120
1NO/1NC
3NP5065 – 1EF86
2.5 – 50
1NO/1NC
3NP5065 – 1EG86
400/500 V AC
2
1
2,500
250
1
1,600
250
200
3
5,040
630
3
3,200
630
400
2
4,000
400
2
2,520
400
315
2)
in mm
With electronic fuse monitoring
1/250 2/400 3/630
100
50
50
32
40
60
1
2,500
250
1
1,280
250
160
Size 00
6 – 240
6 – 2 x 240
For surface mounting and switchboard install. in mm
Auxiliary contacts
160 A
Size 00
Flat pad connection
Clamp connection
1NO/1NC
1NO/1NC
3NP5060 – 0HA13
3NP5060 – 0HB13
250 A
400 A
630 A
Size 1
Size 2
Size 3
Flat pad connection
Flat pad connection
Flat pad connection
1NO/1NC
1NO/1NC
1NO/1NC
3NP5260 – 0HA13
3NP5360 – 0HA13
3NP5460 – 0HA13
For 40 mm busbars1)
160 A
Size 00 at
Flat pad connection
the bottom
2.5 –120
2.5 – 50
6 – 150
6 – 240
6 – 2 x 240
in mm2
Auxiliary contacts
2.5 – 120
1NO/1NC
3NP5065 – 1HF13
1) for mounting on 60 mm busbars, use devices “for surface mounting and installation” and 8US1 busbar adapters
2) optionally, 2 NO as signal outputs: Order No. 3NP5…–.E.26
3NP5 high end series – Accessories
Accessories
for 3NP50
Size 00
for 3NP52
Size 1
for 3NP53
Size 2
for 3NP54
Size 3
Clamp connection
(1 set = 3 units)
3NY1903
2.5 – 50 mm2
3NY1907
35 – 120 mm2
–
–
Quick retaining plate
between 2 mounting
rails
3NY1995
–
–
–
Adapter
for mounting
on 60 mm
busbars
8US1291-4SB00
8US1210-4AG00
8US1210-4AG00
8US1210-4AG00
3NY1105
215 x 135
–
–
–
3NY1115
215 x 135
–
–
–
3NY1107
265 x 135
–
–
–
3NY1208
250 x 149
3NY1210
300 x 220
3NY1211
300 x 245
3NY1212
300 x 290
3NY1106
290 x 135
–
–
–
3NY1116
290 x 135
–
–
–
3NY1108
–
–
–
–
3NY1241
3NY1245
3NY1245
Auxiliary contacts
1NO/1NC
(= mounting set)
3NY3033
3NY3034
3NY3034
3NY3034
Sealing lug
can be retrofitted
(1 pkg. = 10 units)
3NY1940
–
–
–
Molded-plastic
masking frames
Dimensions (H x W):
for disconnectors
without/with auxiliary
contacts
Dimensions (H x W):
for disconnectors
with auxiliary contacts
Dimensions (H x W):
Masking frame
mounting set
Dimensions (H x W):
for mounting the disconnector in the front of
the switchgear panel
(masking frame and
mounting parts)
Cable lug cover
Masking frame (H x W)
for disconnectors without/
with auxiliary contacts
Masking frame (H x W)
for disconnectors
with auxiliary contacts
2 separate covers for
top/bottom
6 individual covers
(L = 120 mm)
for spare parts, refer to Catalog NSK, Section 12
for masking frames and mounting sets for 8HP molded-plastic distribution systems, refer to Catalog
8ZX1012-OHP54-5AB1
for masking frames and mounting sets for SIKUS installation distribution panels, refer to Catalogs
I2.34 and 12.35
Subject to change without prior notice 08/02 | Bestell-Nr. EXXXXX-A190-PXXX | DISPO XXXXX | XXXXXXXXX PDWL.XX.X.XX WS 0802X.X | Printed in Germany
Fuses for overload and short-circuit protection means: high short-circuit currents
Siemens AG
Automation and Drives
Low Voltage Controls and Distribution
P. O. Box 32 40, D-91050 Erlangen
www.siemens.com/sentric
Selection and ordering data
3NP4 standard series
3NP4 standard
Accessories
for 3
Size
Basic versions
For surface mounting and switchboard install.
Connection in mm2
160 A1)
160 A
Size 000
Size 00
250 A
400 A
630 A
Size
Size
Size
1.5 – 50
up to 2 x 70 (M8)
2.5 – 70
up to 150 (M10)
up to 240 (M12)
up to 2 x 240 (M12)
1
2
3
SIGUT terminal
Flat pad connection
SIGUT terminal
Flat pad connection
Flat pad connection
Flat pad connection
For 40 mm busbars2)
160 A1)
160 A
Size 000
Size 00
Connection in mm2
SIGUT terminal
Flat pad connection
SIGUT terminal
250 A
Size
1
Flat pad connection
For 60 mm busbars
160 A1)
160 A
Size 000
Size 00
400 A
630 A
Size
Size
Size
1
2
3
With fuse monitoring
1.5 – 50
Connection, top
Connection, bottom
3NP4015 – 1CK01
3NP4015 – 1CJ01
up to 2 x 70 (M8)
Connection, top
Connection, bottom
3NP4075 – 1CE01
3NP4075 – 1CF01
2.5 – 70
Connection, top
Connection, bottom
3NP4075 – 1CK01
3NP4075 – 1CJ01
up to 150 (M10)
top or bottom3)
3NP4275– 1CG01
Connection in mm
2
SIGUT terminal
Flat pad connection
SIGUT terminal
250 A
3NP4010 – 0CH10
3NP4070 – 0CA01
3NP4070 – 0CH01
3NP4270 – 0CA01
3NP4370 – 0CA10
3NP4470 – 0CA01
Flat pad connection
Flat pad connection
Flat pad connection
1.5 – 50
Connection, top
Connection, bottom
3NP4016 – 1CK01
3NP4016 – 1CJ01
up to 2 x 70 (M8)
Connection, top
Connection, bottom
3NP4076 – 1CE01
3NP4076 – 1CF01
2.5 – 70
Connection, top
Connection, bottom
3NP4076 – 1CK01
3NP4076 – 1CJ01
up to 150 (M10)
top or bottom3)
3NP4276 – 1CG01
up to 240 (M12)
top or bottom3)
3NP4376 – 1CG01
up to 2 x 240 (M12)
top or bottom3)
3NP4476 – 1CG01
400 – 690 V AC, 220 V DC
all of the versions specified above (except size 000) are also available with mounted fuse
monitoring; Order No. supplement: 3NP4…–.F.01
1) 125 and 160 A only with special, 21-mm-wide fuses 3NY1822 and 3NY1824, refer to Accessories
2) Adapter depth, 28 mm; for disconnectors with deeper adapters (49 mm), refer to Catalog NSK, Section 12
3) Connection modules can be replaced, refer to the Instruction Manual
Connection terminals
(1 set = 3 units) connection:
inte
Cable lug cover
(1 set = 3 units) safe from
finger touch cover of the flat
pad connection acc. to VBG4
not
Auxiliary contact,
1 changeover contact
normal version
electronics-compatible
Quick retaining plate
to mount the disconnectors
between two mounting rails
(125 mm clearance)
3NY
3NY
3NY
Busbar width compensation
only for 5 mm busbars
not
for 10 mm busbars
brea
Three-way terminal
(1 set = 3 units) to connect
3 x 2.5 – 16 mm2 (e/m) or
3 x 2.5 – 10 mm2 (finely
stranded with end sleeves)
for mounting onto a
SIGUT terminal
for mounting onto a
flat pad connection
3-phase busbars
for 2 disconnectors
for 3 disconnectors
for 4 disconnectors
connecting buses
for > 4 disconnectors
cap for empty location (20x units):
Incoming supply terminal
(1 set = 3 units) for conductors e/m: up to 95 mm2
finely stranded with end
sleeves: up to 70 mm2
3NY
–
3NY
3NY
3NY
3NY
3NY
3NY
Fuse links, size 000
21 mm wide, Duty class gL/gC
400 V/125 A
3NY
400 V/160 A
3NY
Sealing pin
can be retrofitted
(1 pkg. = 10 units)
Masking frames
for mounting in general
distribution systems
for disconnectors with
SIGUT terminal
for disconnectors with
flat pad connection
Dimensions (H x W):
Overreach protection
(10 units)
inte
3NY
–
215
inte
for spare parts, refer to Catalog N
for masking frames and mountin
E20001-8ZX1012-OHP54-5AB1
Selection and ordering data
3NP4 standard series
3NP4 standard series – Accessories
Accessories
Basic versions
For surface mounting and switchboard install.
Connection in mm2
160 A1)
160 A
Size 000
Size 00
250 A
400 A
630 A
Size
Size
Size
1.5 – 50
up to 2 x 70 (M8)
2.5 – 70
up to 150 (M10)
up to 240 (M12)
up to 2 x 240 (M12)
1
2
3
SIGUT terminal
Flat pad connection
SIGUT terminal
Flat pad connection
Flat pad connection
Flat pad connection
For 40 mm busbars2)
160 A1)
160 A
Size 000
Size 00
Connection in mm2
SIGUT terminal
Flat pad connection
SIGUT terminal
250 A
Size
1
Flat pad connection
For 60 mm busbars
160 A1)
160 A
Size 000
Size 00
400 A
630 A
Size
Size
Size
1
2
3
With fuse monitoring
1.5 – 50
Connection, top
Connection, bottom
3NP4015 – 1CK01
3NP4015 – 1CJ01
up to 2 x 70 (M8)
Connection, top
Connection, bottom
3NP4075 – 1CE01
3NP4075 – 1CF01
2.5 – 70
Connection, top
Connection, bottom
3NP4075 – 1CK01
3NP4075 – 1CJ01
up to 150 (M10)
top or bottom3)
3NP4275– 1CG01
Connection in mm
2
SIGUT terminal
Flat pad connection
SIGUT terminal
250 A
3NP4010 – 0CH10
3NP4070 – 0CA01
3NP4070 – 0CH01
3NP4270 – 0CA01
3NP4370 – 0CA10
3NP4470 – 0CA01
Flat pad connection
Flat pad connection
Flat pad connection
1.5 – 50
Connection, top
Connection, bottom
3NP4016 – 1CK01
3NP4016 – 1CJ01
up to 2 x 70 (M8)
Connection, top
Connection, bottom
3NP4076 – 1CE01
3NP4076 – 1CF01
2.5 – 70
Connection, top
Connection, bottom
3NP4076 – 1CK01
3NP4076 – 1CJ01
up to 150 (M10)
top or bottom3)
3NP4276 – 1CG01
up to 240 (M12)
top or bottom3)
3NP4376 – 1CG01
up to 2 x 240 (M12)
top or bottom3)
3NP4476 – 1CG01
400 – 690 V AC, 220 V DC
all of the versions specified above (except size 000) are also available with mounted fuse
monitoring; Order No. supplement: 3NP4…–.F.01
1) 125 and 160 A only with special, 21-mm-wide fuses 3NY1822 and 3NY1824, refer to Accessories
2) Adapter depth, 28 mm; for disconnectors with deeper adapters (49 mm), refer to Catalog NSK, Section 12
3) Connection modules can be replaced, refer to the Instruction Manual
for 3NP401
Size 000
for 3NP407
Size 00
for 3NP42
Size 1
for 3NP43
Size 2
Connection terminals
(1 set = 3 units) connection:
integrated
integrated
3NY7120
70 – 150 mm2
3NY7130
3NY7140
120 – 240 mm2 150 – 300 mm2
Cable lug cover
(1 set = 3 units) safe from
finger touch cover of the flat
pad connection acc. to VBG4
not required
3NY7101
3NY7121
3NY7131
3NY7141
3NY3035
3NY3030
3NY3035
3NY3030
3NY3035
3NY3030
3NY3035
3NY3030
3NY3035
3NY3030
3NY1995
3NY1995
3NY7322
–
–
Auxiliary contact,
1 changeover contact
normal version
electronics-compatible
Quick retaining plate
to mount the disconnectors
between two mounting rails
(125 mm clearance)
for 3NP44
Size 3
3NP4 – quickly mou
Busbar width compensation
only for 5 mm busbars
not required
for 10 mm busbars
break-off
not required
break-off
3NY7381
not required
3NY7381
not required
not possible
not required
3NY7102
3NY7102
–
–
–
–
3NY7105
–
–
–
3NY1237
3NY1238
3NY1438
–
–
–
–
–
–
–
–
–
–
–
–
3NY1263
3NY1265
–
–
–
–
–
–
–
–
3NY1236
–
–
–
–
Fuse links, size 000
21 mm wide, Duty class gL/gC
400 V/125 A
3NY1822
400 V/160 A
3NY1824
–
–
–
–
–
–
–
–
integrated
integrated
3NY7482
3NY7482
3NY7482
3NY1251
3NY7200
–
–
–
–
215 x 130
3NY7201
215 x 130
3NY7220
375 x 220
3NY7230
375 x 245
3NY7240
375 x 290
integrated
integrated
3NY7481
3NY7481
3NY7481
Three-way terminal
(1 set = 3 units) to connect
3 x 2.5 – 16 mm2 (e/m) or
3 x 2.5 – 10 mm2 (finely
stranded with end sleeves)
for mounting onto a
SIGUT terminal
for mounting onto a
flat pad connection
3-phase busbars
for 2 disconnectors
for 3 disconnectors
for 4 disconnectors
connecting buses
for > 4 disconnectors
cap for empty location (20x units):
Incoming supply terminal
(1 set = 3 units) for conductors e/m: up to 95 mm2
finely stranded with end
sleeves: up to 70 mm2
Sealing pin
can be retrofitted
(1 pkg. = 10 units)
Masking frames
for mounting in general
distribution systems
for disconnectors with
SIGUT terminal
for disconnectors with
flat pad connection
Dimensions (H x W):
Overreach protection
(10 units)
for spare parts, refer to Catalog NSK, Section 12
for masking frames and mounting sets for 8HP molded-plastic distribution systems, refer to Catalog
E20001-8ZX1012-OHP54-5AB1
All-around safety
With the cable lug covers cor
enclosed disconnectors offer
protection, even after a volta
holes in the withdrawable fus
with SIGUT terminals are com
touch without any additional
The large clear inspection win
and the operating statuses of
quickly and reliably identified
around touch protection is al
the withdrawable fuse carrier
Size 1 shock protection is ava
At home on all busbars
All 3NP4 sizes are available fo
busbar center clearance. Busb
10 mm wide. For 10 mm bus
00, two lugs must be broken
busbar clamps. Busbar compe
as accessory for mounting siz
busbars (size 3 disconnectors
snapped onto 5 mm busbars)
By simply snapping onto the
the disconnectors can also be
double T profiles as well as on
from the Rittal company, with
of the busbars preventing this
Selection and ordering data
3NP4 standard series
3NP4 standard series – Accessories
Accessories
Basic versions
For surface mounting and switchboard install.
Connection in mm2
160 A1)
160 A
Size 000
Size 00
250 A
400 A
630 A
Size
Size
Size
1.5 – 50
up to 2 x 70 (M8)
2.5 – 70
up to 150 (M10)
up to 240 (M12)
up to 2 x 240 (M12)
1
2
3
SIGUT terminal
Flat pad connection
SIGUT terminal
Flat pad connection
Flat pad connection
Flat pad connection
For 40 mm busbars2)
160 A1)
160 A
Size 000
Size 00
Flat pad connection
SIGUT terminal
250 A
Size
1
Flat pad connection
For 60 mm busbars
160 A1)
160 A
Size 000
Size 00
400 A
630 A
Size
Size
Size
1
2
3
With fuse monitoring
1.5 – 50
Connection, top
Connection, bottom
up to 2 x 70 (M8)
Connection, top
Connection, bottom
2.5 – 70
Connection, top
Connection, bottom
up to 150 (M10)
top or bottom3)
3NP4015 – 1CK01
3NP4015 – 1CJ01
3NP4075 – 1CE01
3NP4075 – 1CF01
3NP4075 – 1CK01
3NP4075 – 1CJ01
3NP4275– 1CG01
Connection in mm2
SIGUT terminal
Flat pad connection
SIGUT terminal
250 A
3NP4010 – 0CH10
3NP4070 – 0CA01
3NP4070 – 0CH01
3NP4270 – 0CA01
3NP4370 – 0CA10
3NP4470 – 0CA01
Connection in mm2
SIGUT terminal
Flat pad connection
Flat pad connection
Flat pad connection
By simply snapping onto the busbars from the top,
the disconnectors can also be mounted onto T or
double T profiles as well as onto Power-Line systems
from the Rittal company, without the horizontal parts
of the busbars preventing this.
1.5 – 50
Connection, top
Connection, bottom
3NP4016 – 1CK01
3NP4016 – 1CJ01
up to 2 x 70 (M8)
Connection, top
Connection, bottom
3NP4076 – 1CE01
3NP4076 – 1CF01
2.5 – 70
Connection, top
Connection, bottom
3NP4076 – 1CK01
3NP4076 – 1CJ01
up to 150 (M10)
top or bottom3)
3NP4276 – 1CG01
up to 240 (M12)
top or bottom3)
3NP4376 – 1CG01
up to 2 x 240 (M12)
top or bottom3)
3NP4476 – 1CG01
400 – 690 V AC, 220 V DC
all of the versions specified above (except size 000) are also available with mounted fuse
monitoring; Order No. supplement: 3NP4…–.F.01
1) 125 and 160 A only with special, 21-mm-wide fuses 3NY1822 and 3NY1824, refer to Accessories
2) Adapter depth, 28 mm; for disconnectors with deeper adapters (49 mm), refer to Catalog NSK, Section 12
3) Connection modules can be replaced, refer to the Instruction Manual
for 3NP401
Size 000
for 3NP407
Size 00
for 3NP42
Size 1
for 3NP43
Size 2
Connection terminals
(1 set = 3 units) connection:
integrated
integrated
3NY7120
70 – 150 mm2
3NY7130
3NY7140
120 – 240 mm2 150 – 300 mm2
Cable lug cover
(1 set = 3 units) safe from
finger touch cover of the flat
pad connection acc. to VBG4
not required
3NY7101
3NY7121
3NY7131
Auxiliary contact,
1 changeover contact
normal version
electronics-compatible
Quick retaining plate
to mount the disconnectors
between two mounting rails
(125 mm clearance)
3NY3035
3NY3030
3NY3035
3NY3030
3NY3035
3NY3030
3NY3035
3NY3030
3NY1995
3NY1995
3NY7322
–
–
3-phase busbars
for 2 disconnectors
for 3 disconnectors
for 4 disconnectors
connecting buses
for > 4 disconnectors
cap for empty location (20x units):
Incoming supply terminal
(1 set = 3 units) for conductors e/m: up to 95 mm2
finely stranded with end
sleeves: up to 70 mm2
Masking frames
for mounting in general
distribution systems
for disconnectors with
SIGUT terminal
for disconnectors with
flat pad connection
Dimensions (H x W):
Overreach protection
(10 units)
The circuit-breaker is connected in parallel to the
three main disconnector phases, and is tripped as
soon as at least one of three fuses blows. The voltage
is tapped at the handle lugs of the fuses which means
that only fuses with live grip lugs can be used.
not required
break-off
3NY7381
not required
3NY7381
not required
not possible
not required
3NY7102
3NY7102
–
–
–
–
3NY7105
–
–
–
3NY1237
3NY1238
3NY1438
–
–
–
–
–
–
–
–
–
–
–
–
3NY1263
3NY1265
–
–
–
–
–
–
–
–
3NY1236
–
–
–
–
integrated
–
–
–
–
–
–
–
–
integrated
3NY7482
3NY7482
3NY7482
3NY1251
3NY7200
–
–
–
–
215 x 130
3NY7201
215 x 130
3NY7220
375 x 220
3NY7230
375 x 245
3NY7240
375 x 290
integrated
integrated
3NY7481
3NY7481
3NY7481
for spare parts, refer to Catalog NSK, Section 12
for masking frames and mounting sets for 8HP molded-plastic distribution systems, refer to Catalog
E20001-8ZX1012-OHP54-5AB1
This button prevents the shock protection from
being inserted as long as the latching mechanism
hasn’t correctly latched into place.
Allaround safety
With the cable lug covers correctly
mounted, the enclosed disconnectors offer a high IP
30 degree of protection, even after a voltage test
using the 6 test holes in the withdrawable fuse carrier. The versions with SIGUT terminals are completely
safe from finger touch without any additional covers.
The large clear inspection window allows the type
and the operating statuses of the fuse links to be
quickly and reliably identified. Overreach and reacharound touch protection is already integrated into
the withdrawable fuse carrier up to 160 A; from
Size 1 shock protection is available as accessory.
At home on all busbars
All 3NP4 sizes are available for 40 mm or 60 mm
busbar center clearance. Busbars can either be 5 or
10 mm wide. For 10 mm busbars, for sizes 000 and
00, two lugs must be broken off at the three rear
busbar clamps. Busbar compensation is available
as accessory for mounting sizes 1 and 2 onto 5 mm
busbars (size 3 disconnectors cannot only be
snapped onto 5 mm busbars).
Quickly mounted …
All of these features reduce valuable mounting
and installation time. It also means that the correct
tightening torque of the screws doesn’t have to be
checked and adjusted. The mounting rail latching
mechanisms, integrated into the basic size 000 and
00 devices, also provide a clear financial benefit,
especially, where up to 160 A disconnectors are used
in larger unit quantities: additional screws, hooks,
intermediate plates or a second mounting rail are
not required.
Smart accessories for every
application
The auxiliary contacts, which fit all sizes, can be
subsequently retrofitted without taking up any
extra space.
The three-way terminal makes it easy to connect
up to 3 cables (e. g. for capacitor protection).
Several disconnectors can be fed in parallel using
the 3-phase busbars, connecting buses and feeder
terminals up to 225 A. Numerous masking frames
and mounting sets for SIKUS distribution boards or
the 8HP distribution system guarantee simple engineering and fast mounting and installation.
3NP Fuse Switch Disconnector –
the Optimum Handle on Every Application
1NO/1NC signal outputs are used as standard. For
size 00, they are brought out to a connector socket
at the front, and for sizes 1 to 3, as double AMP flat
connector at the shock protection in the lower section
of the disconnector.
Either pre-assembled 1- or 3-m cables with strain
relief can be used as connecting cable for size 00.
These can then be easily inserted at the fuse monitoring using the mounted connectors. There are also
connector mounting sets for crimping (short-circuit
proof) cables.
3NP4 – quickly mounted onto all busbars
Fuse links, size 000
21 mm wide, Duty class gL/gC
400 V/125 A
3NY1822
400 V/160 A
3NY1824
Sealing pin
can be retrofitted
(1 pkg. = 10 units)
can frequently occur, e. g. in line supplies with AC
drive converters and inverters.
Intelligent latching mechanism
This automatically adapts itself to busbar widths
between 5 and 30 mm, and it reliably latches into
place. This eliminates numerous versions and
complicated adjustments before mounting. There
is a small red button inside the switch, which,
especially from size 1, ensures that the disconnector
is really mounted onto the busbar to its endstop.
3NY7141
3NY3035
3NY3030
Busbar width compensation
only for 5 mm busbars
not required
for 10 mm busbars
break-off
Three-way terminal
(1 set = 3 units) to connect
3 x 2.5 – 16 mm2 (e/m) or
3 x 2.5 – 10 mm2 (finely
stranded with end sleeves)
for mounting onto a
SIGUT terminal
for mounting onto a
flat pad connection
for 3NP44
Size 3
Fuse monitoring for 3NP4
From size NH00 onwards, all of the 3NP4 versions are
also available with fuse monitoring. This is realized
using 3RV SIRIUS circuit-breakers which are mounted
at the front in the center of the fuse carrier.
Flat connectors are always used for sizes 1–3.
The disconnector can then be fed as required from
either the top or the bottom, whereby voltages up to
690 V AC/220 V DC are possible. Furthermore, this
type of fuse monitoring is completely insensitive to
EMC disturbances and harmonics. These disturbances
The function of the 3RV can be tested at any time
using the test button provided.
Technical data
Type
Rated operational voltage Ue
3NP401
AC 50/60 Hz V
DC V
3NP40 7
3NP42
3NP43
3NP44
690
690
220 (3 phases in series)
440 (2 phases in series)
with mounted fuse monitoring upt to 220 V DC max.
Rated conditional short-circuit current with fuses
(for fast closing)
With fuse links
rated current
Size/A
For 400 V AC (690 V)
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
000/100 (35) 00/160
50 (50)
50
11 (5)
15
1/250
50
25
2/400
50
35
3/630
50
55
Short-circuit strength with fuse
(with the disconnector closed)
With fuse links
rated current
Size/A
Up to 690 V
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
000/100
100
15
00/160
50
15
1/250
50
25
2/400
50
35
3/630
50
55
Rated operational current and switching capacity
(supply from either the top or bottom)
For 400 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35) A (RMS value)
Rated operating current Ie for AC-21B, AC-22B
A
AC-23B
A
000
800
160
100
00
800
160
100
1
2,000
250
250
2
3,200
400
400
3
5,040
630
630
For 690 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35) A (RMS value)
Rated operating current Ie for AC-21B
A
AC-22B
A
AC-23B
A
000
240
160
50
25
00
240
160
50
25
1
375
250
–
–
2
600
400
–
–
3
945
630
–
–
for additional values, refer to Catalog NSK, Section 12 (e. g. capacitor and DC switching capacity, switching capacity
at 500 V AC, ...)
sentric
Selection and ordering data
3NP4 standard series
3NP4 standard series – Accessories
Accessories
Basic versions
For surface mounting and switchboard install.
Connection in mm2
160 A1)
160 A
Size 000
Size 00
250 A
400 A
630 A
Size
Size
Size
1.5 – 50
up to 2 x 70 (M8)
2.5 – 70
up to 150 (M10)
up to 240 (M12)
up to 2 x 240 (M12)
1
2
3
SIGUT terminal
Flat pad connection
SIGUT terminal
Flat pad connection
Flat pad connection
Flat pad connection
For 40 mm busbars2)
160 A1)
160 A
Size 000
Size 00
Flat pad connection
SIGUT terminal
250 A
Size
1
Flat pad connection
For 60 mm busbars
160 A1)
160 A
Size 000
Size 00
400 A
630 A
Size
Size
Size
1
2
3
With fuse monitoring
1.5 – 50
Connection, top
Connection, bottom
up to 2 x 70 (M8)
Connection, top
Connection, bottom
2.5 – 70
Connection, top
Connection, bottom
up to 150 (M10)
top or bottom3)
3NP4015 – 1CK01
3NP4015 – 1CJ01
3NP4075 – 1CE01
3NP4075 – 1CF01
3NP4075 – 1CK01
3NP4075 – 1CJ01
3NP4275– 1CG01
Connection in mm2
SIGUT terminal
Flat pad connection
SIGUT terminal
250 A
3NP4010 – 0CH10
3NP4070 – 0CA01
3NP4070 – 0CH01
3NP4270 – 0CA01
3NP4370 – 0CA10
3NP4470 – 0CA01
Connection in mm2
SIGUT terminal
Flat pad connection
Flat pad connection
Flat pad connection
By simply snapping onto the busbars from the top,
the disconnectors can also be mounted onto T or
double T profiles as well as onto Power-Line systems
from the Rittal company, without the horizontal parts
of the busbars preventing this.
1.5 – 50
Connection, top
Connection, bottom
3NP4016 – 1CK01
3NP4016 – 1CJ01
up to 2 x 70 (M8)
Connection, top
Connection, bottom
3NP4076 – 1CE01
3NP4076 – 1CF01
2.5 – 70
Connection, top
Connection, bottom
3NP4076 – 1CK01
3NP4076 – 1CJ01
up to 150 (M10)
top or bottom3)
3NP4276 – 1CG01
up to 240 (M12)
top or bottom3)
3NP4376 – 1CG01
up to 2 x 240 (M12)
top or bottom3)
3NP4476 – 1CG01
400 – 690 V AC, 220 V DC
all of the versions specified above (except size 000) are also available with mounted fuse
monitoring; Order No. supplement: 3NP4…–.F.01
1) 125 and 160 A only with special, 21-mm-wide fuses 3NY1822 and 3NY1824, refer to Accessories
2) Adapter depth, 28 mm; for disconnectors with deeper adapters (49 mm), refer to Catalog NSK, Section 12
3) Connection modules can be replaced, refer to the Instruction Manual
for 3NP401
Size 000
for 3NP407
Size 00
for 3NP42
Size 1
for 3NP43
Size 2
Connection terminals
(1 set = 3 units) connection:
integrated
integrated
3NY7120
70 – 150 mm2
3NY7130
3NY7140
120 – 240 mm2 150 – 300 mm2
Cable lug cover
(1 set = 3 units) safe from
finger touch cover of the flat
pad connection acc. to VBG4
not required
3NY7101
3NY7121
3NY7131
Auxiliary contact,
1 changeover contact
normal version
electronics-compatible
Quick retaining plate
to mount the disconnectors
between two mounting rails
(125 mm clearance)
3NY3035
3NY3030
3NY3035
3NY3030
3NY3035
3NY3030
3NY3035
3NY3030
3NY1995
3NY1995
3NY7322
–
–
3-phase busbars
for 2 disconnectors
for 3 disconnectors
for 4 disconnectors
connecting buses
for > 4 disconnectors
cap for empty location (20x units):
Incoming supply terminal
(1 set = 3 units) for conductors e/m: up to 95 mm2
finely stranded with end
sleeves: up to 70 mm2
Masking frames
for mounting in general
distribution systems
for disconnectors with
SIGUT terminal
for disconnectors with
flat pad connection
Dimensions (H x W):
Overreach protection
(10 units)
The circuit-breaker is connected in parallel to the
three main disconnector phases, and is tripped as
soon as at least one of three fuses blows. The voltage
is tapped at the handle lugs of the fuses which means
that only fuses with live grip lugs can be used.
not required
break-off
3NY7381
not required
3NY7381
not required
not possible
not required
3NY7102
3NY7102
–
–
–
–
3NY7105
–
–
–
3NY1237
3NY1238
3NY1438
–
–
–
–
–
–
–
–
–
–
–
–
3NY1263
3NY1265
–
–
–
–
–
–
–
–
3NY1236
–
–
–
–
integrated
–
–
–
–
–
–
–
–
integrated
3NY7482
3NY7482
3NY7482
3NY1251
3NY7200
–
–
–
–
215 x 130
3NY7201
215 x 130
3NY7220
375 x 220
3NY7230
375 x 245
3NY7240
375 x 290
integrated
integrated
3NY7481
3NY7481
3NY7481
for spare parts, refer to Catalog NSK, Section 12
for masking frames and mounting sets for 8HP molded-plastic distribution systems, refer to Catalog
E20001-8ZX1012-OHP54-5AB1
This button prevents the shock protection from
being inserted as long as the latching mechanism
hasn’t correctly latched into place.
Allaround safety
With the cable lug covers correctly
mounted, the enclosed disconnectors offer a high IP
30 degree of protection, even after a voltage test
using the 6 test holes in the withdrawable fuse carrier. The versions with SIGUT terminals are completely
safe from finger touch without any additional covers.
The large clear inspection window allows the type
and the operating statuses of the fuse links to be
quickly and reliably identified. Overreach and reacharound touch protection is already integrated into
the withdrawable fuse carrier up to 160 A; from
Size 1 shock protection is available as accessory.
At home on all busbars
All 3NP4 sizes are available for 40 mm or 60 mm
busbar center clearance. Busbars can either be 5 or
10 mm wide. For 10 mm busbars, for sizes 000 and
00, two lugs must be broken off at the three rear
busbar clamps. Busbar compensation is available
as accessory for mounting sizes 1 and 2 onto 5 mm
busbars (size 3 disconnectors cannot only be
snapped onto 5 mm busbars).
Quickly mounted …
All of these features reduce valuable mounting
and installation time. It also means that the correct
tightening torque of the screws doesn’t have to be
checked and adjusted. The mounting rail latching
mechanisms, integrated into the basic size 000 and
00 devices, also provide a clear financial benefit,
especially, where up to 160 A disconnectors are used
in larger unit quantities: additional screws, hooks,
intermediate plates or a second mounting rail are
not required.
Smart accessories for every
application
The auxiliary contacts, which fit all sizes, can be
subsequently retrofitted without taking up any
extra space.
The three-way terminal makes it easy to connect
up to 3 cables (e. g. for capacitor protection).
Several disconnectors can be fed in parallel using
the 3-phase busbars, connecting buses and feeder
terminals up to 225 A. Numerous masking frames
and mounting sets for SIKUS distribution boards or
the 8HP distribution system guarantee simple engineering and fast mounting and installation.
3NP Fuse Switch Disconnector –
the Optimum Handle on Every Application
1NO/1NC signal outputs are used as standard. For
size 00, they are brought out to a connector socket
at the front, and for sizes 1 to 3, as double AMP flat
connector at the shock protection in the lower section
of the disconnector.
Either pre-assembled 1- or 3-m cables with strain
relief can be used as connecting cable for size 00.
These can then be easily inserted at the fuse monitoring using the mounted connectors. There are also
connector mounting sets for crimping (short-circuit
proof) cables.
3NP4 – quickly mounted onto all busbars
Fuse links, size 000
21 mm wide, Duty class gL/gC
400 V/125 A
3NY1822
400 V/160 A
3NY1824
Sealing pin
can be retrofitted
(1 pkg. = 10 units)
can frequently occur, e. g. in line supplies with AC
drive converters and inverters.
Intelligent latching mechanism
This automatically adapts itself to busbar widths
between 5 and 30 mm, and it reliably latches into
place. This eliminates numerous versions and
complicated adjustments before mounting. There
is a small red button inside the switch, which,
especially from size 1, ensures that the disconnector
is really mounted onto the busbar to its endstop.
3NY7141
3NY3035
3NY3030
Busbar width compensation
only for 5 mm busbars
not required
for 10 mm busbars
break-off
Three-way terminal
(1 set = 3 units) to connect
3 x 2.5 – 16 mm2 (e/m) or
3 x 2.5 – 10 mm2 (finely
stranded with end sleeves)
for mounting onto a
SIGUT terminal
for mounting onto a
flat pad connection
for 3NP44
Size 3
Fuse monitoring for 3NP4
From size NH00 onwards, all of the 3NP4 versions are
also available with fuse monitoring. This is realized
using 3RV SIRIUS circuit-breakers which are mounted
at the front in the center of the fuse carrier.
Flat connectors are always used for sizes 1–3.
The disconnector can then be fed as required from
either the top or the bottom, whereby voltages up to
690 V AC/220 V DC are possible. Furthermore, this
type of fuse monitoring is completely insensitive to
EMC disturbances and harmonics. These disturbances
The function of the 3RV can be tested at any time
using the test button provided.
Technical data
Type
Rated operational voltage Ue
3NP401
AC 50/60 Hz V
DC V
3NP40 7
3NP42
3NP43
3NP44
690
690
220 (3 phases in series)
440 (2 phases in series)
with mounted fuse monitoring upt to 220 V DC max.
Rated conditional short-circuit current with fuses
(for fast closing)
With fuse links
rated current
Size/A
For 400 V AC (690 V)
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
000/100 (35) 00/160
50 (50)
50
11 (5)
15
1/250
50
25
2/400
50
35
3/630
50
55
Short-circuit strength with fuse
(with the disconnector closed)
With fuse links
rated current
Size/A
Up to 690 V
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
000/100
100
15
00/160
50
15
1/250
50
25
2/400
50
35
3/630
50
55
Rated operational current and switching capacity
(supply from either the top or bottom)
For 400 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35) A (RMS value)
Rated operating current Ie for AC-21B, AC-22B
A
AC-23B
A
000
800
160
100
00
800
160
100
1
2,000
250
250
2
3,200
400
400
3
5,040
630
630
For 690 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35) A (RMS value)
Rated operating current Ie for AC-21B
A
AC-22B
A
AC-23B
A
000
240
160
50
25
00
240
160
50
25
1
375
250
–
–
2
600
400
–
–
3
945
630
–
–
for additional values, refer to Catalog NSK, Section 12 (e. g. capacitor and DC switching capacity, switching capacity
at 500 V AC, ...)
sentric
can also be safely handled, favorably-priced backup protection, simple selectivity calculations and absolute reliability, even when short-circuits occur. The fuse
3NP5 – the rugged types for
the toughest applications
melts completely so that there is no residual risk as a result of contacts which
may have welded together. When the disconnector is in the open position,
Furthermore, 3NP5 have an extremely high AC-23
switching capacity. The switching gases which are
formed are deflected into the disconnector using a
sophisticated arc chamber design, instead of being
discharged upwards and to the side. This means
that operating personnel and plant sections and
components in the vicinity are reliably protected.
there is a visible isolating gap, which is often demanded, e. g. for maintenance
purposes. And the optional mounted fuse monitoring offers additional security
– fuse switch disconnectors 3NP for the highest plant availability and safety.
Fuse monitoring:
To allow monitoring of the fuses in the disconnectors,
a permanently wired 3RV1 circuit-breaker is mounted
on the fuse carrier.
Fuses for your safety –
3NP4 and 3NP5 switch disconnectors
ble to use other disconnectors available on the market. But the fast closing and arc deflection chambers
of the 3NP5 come through with flying colors. 3NP5
provides the highest degree of safety for operating
personnel and the plant, as main switch with high
switching frequency and good AC-23 characteristics,
e.g. for motor loads.
Both of these ranges are climate-proof and correspond to IEC 60 947-3 and VDE 0660, Part 107.
The fuses can be clearly identified through the large
clear inspection window.
Matching masking frames and complete, TSK-tested
mounting sets are available both for the moldedplastic 8HP distribution system as well as for the
various SIKUS distribution boards.
2 series in the range – the optimum handle on
every application
The 3NP4 series (sizes NH000 to NH3) offer the
optimum solution for most applications. These range
from power distribution in residential and commercial buildings, through flexible distribution stations
up to power distribution systems in large industrial
plants.They are also admirably suited as main and
incoming feeder breakers in industry, for control
systems, as well as in motor feeders or as backup
protection for circuit-breakers. They have an integrated
lug for sealing which is integrated as standard.
This means that they can be used, without any
restrictions, in meter cabinets and incoming main
feeder boxes for buildings.
The rugged 3NP5 series (sizes NH00 to NH3)
provide reliable protection for all of the “tougher”
applications. This is especially true in mining, in the
steel industry, and also in the chemical industry,
where sulphur-laden, or aggressive ambient conditions or hazardous locations make it almost impossi-
The values for switching capacitors (e.g. for reactive
power compensation) were also tested (refer to
Catalog NSK, Section 12), and when used with SITOR
semiconductor or 3NE1 double-protection fuses,
3NP disconnectors can be used to protect soft starters,
AC drive converters and similar devices (tables with
tested device-fuse combinations are provided in the
NSK). Shock and vibration testing as well as special
earthquake tests guarantee that the 3NP can be used
in marine applications, nuclear power stations and
similar safety-critical plants.
high switching frequency for devices such as these.
The erosion electrodes additionally extend the lifetime of the main contacts. The lateral spring mechanism (= fast switching) eliminates any danger as
a result of incorrect operation, e.g. briefly actuating
the disconnector or switching which is too slow.
When the switch disconnector is in the ON position,
the circuit-braker poles are connected in parallel
with the fuses to be monitored. When the switch is
in the OFF position, the poles of the circuit-breaker
are dead.
The 3NP5 disconnector series (sizes NH00 to NH3)
for fixed installation can be quickly hung onto preinstalled mounting bolts. They can also be mounted
on the front of switchgear panels using the matching mounting sets or they can be mounted onto
60 mm busbar systems using 8US1 adapters.
The especially rugged design of this series (plastic
with a high resistance to heat, metal parts which can
be mechanically stressed), permits an unusually
The internal resistance of the circuit-breaker is so
high that it does not affect the protection given by
the monitored fuses.
Rated operational voltage Ue
Electronic fuse monitoring (EFM):
The electronic fuse monitoring system is also
mounted on the fuse carrier of the 3NP5. It works
whether or not a load is present. Fuse blowing can
be signalled to a switch control room by means of a
group indication (2NO contacts + 1NC contact).
2
For surface mounting and switchboard install. in mm
Auxiliary contacts
160 A
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
without
1NO/1NC
250 A
Size 00
Size 1
Flat pad connection
2.5 – 120
Clamp connection
2.5 – 50
Flat pad connection
Clamp connection
Short-circuit strength with fuse
(with the disconnector closed)
With fuse links
rated current
Size/A
For 500 V AC
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
Rated operating current and switching capacity
(supply from either the top or bottom)
For 400 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35)
A (RMS value)
Rated operating current Ie for AC-21B up to AC-23B
A
For 690 V AC, with fuse links or isolating links
Size
Rated breaking current Ic (cos p = 0.35)
A (RMS value)
Rated operating current Ie for AC-21B, AC-22B
A
AC-23B
A
35 – 120
400 A
Size 2
Flat pad connection
6 – 240
630 A
Size 3
Flat pad connection
6 – 2 x 240
160 A
Size 00
in mm2
Auxiliary contacts
Flat pad connection
at the bottom
2.5 – 120
Clamp connection
at the bottom
2.5 – 50
without
1NO/1NC
without
1NO/1NC
3NP5065 – 1CF00
3NP5065 – 1CF10
3NP5065 – 1CG00
3NP5065 – 1CG10
400 – 690 V AC, 220 V DC
For surface mounting and switchboard install. in mm2
Auxiliary contacts2)
160 A
Size 00
Flat pad connection
Clamp connection
2.5 – 120
2.5 – 50
1NO/1NC
1NO/1NC
3NP5060 – 0EA86
3NP5060 – 0EB86
3NP54
250 A
Size 1
Flat pad connection
Clamp connection
6 – 150
35 – 120
1NO/1NC
1NO/1NC
3NP5260 – 0EA86
3NP5260 – 0EB86
690
440 (3 phases in series)
220 (2 phases in series with mounted fuse monitoring)
400 A
630 A
Size 2
Size 3
Flat pad connection
Flat pad connection
1NO/1NC
1NO/1NC
3NP5360 – 0EA86
3NP5460 – 0EA86
3NP52
3NP53
1)
Rated conditional short-circuit current with fuses
With fuse links
rated current
Size/A
For 500 V AC
kA (RMS value)
Permissible fuse cut-off current
kA (peak value)
6 – 150
3NP5060 – 0CA00
3NP5060 – 0CA00
3NP5060 – 0CB00
3NP5060 – 0CB10
3NP5260 – 0CA00
3NP5260 – 0CA10
3NP5260 – 0CB00
3NP5260 – 0CB10
3NP5360 – 0CA00
3NP5360 – 0CA10
3NP5460 – 0CA00
3NP5460 – 0CA10
With fuse monitoring
3NP50
50/60 Hz V AC
V DC
Basic versions
For 40 mm busbars1)
Technical data
Type
Selection and ordering data
3NP5 high end series
2
For 40 mm busbars
00/160
50
15
00/160
100
23
00
1,600
160
00
800
160
100
1/250 2/400 3/630
50
50
50
25
40
50
160 A
for additional values refer to Catalog NSK, Section 12
(e. g. capacitor and DC switching capacity, switching capacity at 500 V AC, …)
0
1,600
160
0
1,000
160
125
2
4,000
400
2
2,520
400
315
Flat pad connection
at the bottom
Clamp connection
at the bottom
Auxiliary contacts
2.5 –120
1NO/1NC
3NP5065 – 1EF86
2.5 – 50
1NO/1NC
3NP5065 – 1EG86
400/500 V AC
2
1
2,500
250
1
1,600
250
200
3
5,040
630
3
3,200
630
400
2
4,000
400
2
2,520
400
315
2)
in mm
With electronic fuse monitoring
1/250 2/400 3/630
100
50
50
32
40
60
1
2,500
250
1
1,280
250
160
Size 00
6 – 240
6 – 2 x 240
For surface mounting and switchboard install. in mm
Auxiliary contacts
160 A
Size 00
Flat pad connection
Clamp connection
1NO/1NC
1NO/1NC
3NP5060 – 0HA13
3NP5060 – 0HB13
250 A
400 A
630 A
Size 1
Size 2
Size 3
Flat pad connection
Flat pad connection
Flat pad connection
1NO/1NC
1NO/1NC
1NO/1NC
3NP5260 – 0HA13
3NP5360 – 0HA13
3NP5460 – 0HA13
For 40 mm busbars1)
160 A
Size 00 at
Flat pad connection
the bottom
2.5 –120
2.5 – 50
6 – 150
6 – 240
6 – 2 x 240
in mm2
Auxiliary contacts
2.5 – 120
1NO/1NC
3NP5065 – 1HF13
1) for mounting on 60 mm busbars, use devices “for surface mounting and installation” and 8US1 busbar adapters
2) optionally, 2 NO as signal outputs: Order No. 3NP5…–.E.26
3NP5 high end series – Accessories
Accessories
for 3NP50
Size 00
for 3NP52
Size 1
for 3NP53
Size 2
for 3NP54
Size 3
Clamp connection
(1 set = 3 units)
3NY1903
2.5 – 50 mm2
3NY1907
35 – 120 mm2
–
–
Quick retaining plate
between 2 mounting
rails
3NY1995
–
–
–
Adapter
for mounting
on 60 mm
busbars
8US1291-4SB00
8US1210-4AG00
8US1210-4AG00
8US1210-4AG00
3NY1105
215 x 135
–
–
–
3NY1115
215 x 135
–
–
–
3NY1107
265 x 135
–
–
–
3NY1208
250 x 149
3NY1210
300 x 220
3NY1211
300 x 245
3NY1212
300 x 290
3NY1106
290 x 135
–
–
–
3NY1116
290 x 135
–
–
–
3NY1108
–
–
–
–
3NY1241
3NY1245
3NY1245
Auxiliary contacts
1NO/1NC
(= mounting set)
3NY3033
3NY3034
3NY3034
3NY3034
Sealing lug
can be retrofitted
(1 pkg. = 10 units)
3NY1940
–
–
–
Molded-plastic
masking frames
Dimensions (H x W):
for disconnectors
without/with auxiliary
contacts
Dimensions (H x W):
for disconnectors
with auxiliary contacts
Dimensions (H x W):
Masking frame
mounting set
Dimensions (H x W):
for mounting the disconnector in the front of
the switchgear panel
(masking frame and
mounting parts)
Cable lug cover
Masking frame (H x W)
for disconnectors without/
with auxiliary contacts
Masking frame (H x W)
for disconnectors
with auxiliary contacts
2 separate covers for
top/bottom
6 individual covers
(L = 120 mm)
for spare parts, refer to Catalog NSK, Section 12
for masking frames and mounting sets for 8HP molded-plastic distribution systems, refer to Catalog
8ZX1012-OHP54-5AB1
for masking frames and mounting sets for SIKUS installation distribution panels, refer to Catalogs
I2.34 and 12.35
Subject to change without prior notice 08/02 | Bestell-Nr. EXXXXX-A190-PXXX | DISPO XXXXX | XXXXXXXXX PDWL.XX.X.XX WS 0802X.X | Printed in Germany
Fuses for overload and short-circuit protection means: high short-circuit currents
Siemens AG
Automation and Drives
Low Voltage Controls and Distribution
P. O. Box 32 40, D-91050 Erlangen
www.siemens.com/sentric