Download THƯ VIỆN PHÁP LUẬT

MINISTRY OF INDUSTRY
AND TRADE
--------
SOCIALIST REPUBLIC OF VIETNAM
Independence - Freedom - Happiness
---------------
No. 55/2015/TT-BCT
Hanoi, December 30, 2015
CIRCULAR
REGULATION ON PROCEDURES FOR INCENTIVE CERTIFICATION AND
VERIFICATION OF PROJECTS FOR MANUFACTURING OF ANCILLARY
PRODUCTS ON THE LIST OF PRIORITIZED ANCILLARY PRODUCTS
Pursuant to the Decree No. 95/2011/ND-CP on functions, responsibilities, power and
organizational structure of The Ministry of Industry and Trade dated November 12, 2012 of
the Government.
Pursuant to the Law No. 71/2014/QH13 amending and supplementing a number of articles of
the Law on Taxation;
Pursuant to the Decree No. 111/2015/ND-CP on development of ancillary industry dated
November 11, 2015 of the Government.
At the request of the Director of the Department of Heavy Industry.
The Minister of Industry and Trade issues this Circular regulating procedures for incentive
certification and verification of projects for manufacturing of ancillary products on the list of
prioritized ancillary products.
Chapter I
GENERAL PROVISIONS
Article 1. Scope
This Circular regulates procedures for incentive certification and verification of projects for
manufacturing of ancillary products (hereinafter referred to as the project) on the list of
ancillary products promulgated in the Decree No. 111/2015/ND-CP on development of
ancillary industry dated November 03, 2015 of the Government.
Article 2. Regulated entities
This Circular applies to entities that manufacture ancillary products on the list of ancillary
products given priority in Vietnam (hereinafter referred to as the List).
Article 3. Interpretation of terms
For the purpose of this Circular, terms below are construed as follows:
1. Ancillary products mean products in the industries of materials, accessories, components
and spare parts used for finished goods.
2. A competent authority means the agency taking charge of receipt and processing of
incentive certification applications:
a) The competent authority of the Ministry of Industry and Trade: the Department of Heavy
Industry;
b) Competent authorities of provinces: regulatory authorities appointed by People's
Committees of provinces under Article 15 of Decree No. 111/ND- CP on development of
ancillary industry dated November 03, 2015.
3. A new investment project for manufacturing of ancillary products means:
a) Every first-time investment project or project that comes into operation independently of
the existing project (hereinafter referred to as an independent project);
b) Every existing project that is entitled to scope expansion, capacity enhancement,
technological innovation in manufacture of ancillary products using new devices and
manufacturing processes with an increase in productivity by at least 20%.
4. Small and medium-sized enterprises (SMEs) mean every enterprise defined by laws on
SMEs.
Article 4. Projects eligible for enterprise income tax incentives
Every new investment project that is eligible for enterprise income tax incentives under
regulations of laws No. 71/2014/QH13 amending and supplementing a number of articles of
the Law on taxation dated November 23, 2014 shall manufacture ancillary products that
satisfy one of the following requirements:
a) The list of ancillary products given priority in Vietnam that are manufactured before
January 01, 2015 (Appendix 1 hereof) and granted a Certificate of Conformity to EU
technical Regulations (standards promulgated by CEN - European Committee for
Standardization) or equivalents (if any);
b) All ancillary products on the List compiled on the Decree No. 111/2015/ND-CP on
development of ancillary industry dated November 03, 2015 of the Government but not
included in Appendix 01 of this Circular.
Chapter II
PROCEDURES FOR INCENTIVE CERTIFICATION AND VERIFICATION
Article 5. Applications for procedures for incentive certification
1. The number of applications:
a) 06 copies: 01 original and 05 duplicates;
b) The application shall be sealed and the applicant's information shall be specified on the file
folder;
c) Where changes in the project that affect the conditions for investment incentives, the
applicant shall submit the competent authority an additional application in which the scope of
changes includes.
2. Documents requested in an application:
a) A written request for incentive certification (Appendix 2 hereof);
b) A Certificate of Enterprise Registration or Certificate of Business Registration;
c) A description of the project:
- With respect to a first time project or an independent project: an proposal for project
investment under the current regulations of laws on investment and construction;
- With respect to an existing project:
+ A description of current status of its manufacturing process, facilities (plants), machines and
equipment ( a list of machines and its capacity, specialized equipment; measuring and quality
control devices); the project’s capacity; the latest annual internal audit report (or an annual
financial statement);
+ A description of investment in scope expansion, technical innovation using new devices and
manufacturing processes with an increase in productivity by at least 20% under the current
regulations of laws on investment and construction.
d) The decision on approval for environmental impact assessment (if new investment
projects) or a commitment to environmental protection under the law on environmental
protection or an as-built certificate, and environmental protective measures (if existing
projects).
dd) A Certificate of conformity to EU technical regulations (standards promulgated by CEN European Committee for Standardization) or the equivalent (if any) granted by certifying
agencies that are permitted to exercise certification activities under regulations of laws on
product quality;
3. Application recipients:
a) Every SME shall submit their application for the project for manufacturing of ancillary
products on the List to the competent authority where the project is located or the Ministry of
Industry and Trade. Each SME must submit its application to only one competent authority;
b) Other types of businesses shall submit their applications to the Ministry of Industry and
Trade (address: 54 Hai Ba Trung street, Hoan Kiem district, Hanoi).
4. Options for application submission:
Directly or online.
Article 6. Scope of project appraisal
1. The observance of regulations of the Decree No. 111/2015/ND-CP on development of
ancillary industry dated November 11, 2015 of the Government.
2. Legal proceedings
3. Project feasibility and rationality of technological-technical solutions that apply to the
project.
4. Financial ability, and the effectiveness of the project.
5. The viability of the environmental protective measures.
Article 7. Power to certify incentive
1. The competent authority of a local government where the project is located or the Ministry
of Industry and Trade shall carry out the incentive certification of such project of SMEs.
2. The Ministry of Industry and Trade shall carry out the incentive certification of projects for
manufacturing of ancillary products that are invested by other type of businesses.
Article 8. Time limit for certification
1. Within 05 working days, the competent authority shall examine the validity and completion
of the application. In case of an incomplete or invalid application, the competent authority
shall request the applicant to supplement his/her application in writing.
2. For a complete and valid application, within 15 working days, the competent authority shall
appraise such application or carry out a site inspection, if necessary. The competent authority
shall send a notification of the result of incentive certification to the applicant within 30
working days.
Article 9. Verification and withdrawal of certificates of incentives
1. Procedures for verification:
a) Inspecting authorities:
- The Ministry of Industry and Trade shall take charge of and cooperate with relevant
Ministries, Departments and agencies to carry out inspections of projects under incentives
nationwide
- The Ministries of Industry and Trade of provinces shall take charge of and cooperate with
relevant Ministries, Departments and agencies to inspect projects that benefit from incentives
within their provinces
b) Methods of inspection:
Surprise inspection or periodic inspection, conducted by the Ministry of Industry and Trade or
Department of Industry and Trade at requests of the State management authority.
c) Scope of inspection
- Legal documentary inspection;
- Facility inspection;
- Inspection of incentives from which the project benefits
- Project progress inspection;
- Inspection of ancillary products of the project eligible for incentives.
The inspection shall be made in record. Any violations found shall be reported to the
competent authority by the Inspectorate.
2. Withdrawal of the certificate of incentives:
The certificate of incentives shall be withdrawn and the defaulting entity shall compensate for
the granted incentives in the following cases:
a)The investor does not report changes in ancillary products under incentives to the competent
authority;
b) After 18 months from the date of incentive certification, there are no ancillary products
mentioned on the application for incentive certification;
c) Any case is petitioned by the inspectorate.
Chapter III
RESPONSIBILITIES AND IMPLEMENTATION
Article 10. Responsibilities of entities
Every entity benefited from incentives shall submit an annual report on the manufacture and
trade in ancillary products under incentives
Article 11. Responsibilities of State regulatory authorities
1. The Department of Heavy Industry shall:
a) Process applications and consult with Ministries, departments and relevant authorities (if
any) on verification;
b) Inspect and instruct entities that manufacture ancillary products on the list in the
implementation of this Circular and relevant laws on manufacturing of ancillary products.
c) Take charge of and cooperate with relevant Ministries, departments and agencies to carry
out surprise and periodic inspections of projects provided with incentives.
2. The competent authority of local government where the project is located shall take charge
of and cooperate with units under provinces to:
a) Process applications and consult with relevant departments onverification ;
b) Inspect and instruct entities that manufacture ancillary products on the list in the
implementation of this Circular and relevant laws on manufacturing of ancillary products.
c)Submit one original of the certificate of incentives to the Department of Heavy Industry –
Ministry of Industry and Trade and 01 duplicate to the Department of Industry and Trade (if
the Department of Industry and Trade is not the competent authority of local government
where incentives are certified).
d) Annually submit an report aggregate report on projects eligible for incentive certification to
the Department of Heavy Industry –Ministry of Industry and Trade .
3. The Departments of Industry and Trade of provinces shall take charge of and cooperate
with relevant Ministries, Departments and agencies to carry out surprise or periodic inspection
of projects that benefit from incentives within their provinces
Article 12. ENTRY INTO FORCE
1. This Circular comes into effect from January 01. 2016.
2. Any issues or concerns arising during the implementation of this Circular shall be promptly
reported to the Ministry of Industry and Trade.
MINISTER
Vu Huy Hoang
APPENDIX 1
THE LIST OF PRIORITIZED ANCILLARY PRODUCTS DOMESTICALLY
MANUFACTURED BEFORE JANUARY 01, 2015
(Promulgated together with the Circular No. 55/2015/TT-BCT dated December 30, 2015 of
the Ministry of Industry and Trade)
I. TEXTILE INDUSTRY
No.
Priority products
Home products
Name of product
1
2
Synthetic fibres : PE, Polyester PSF fibre
Viscose
Knitted and woven
yarn, high tenacity
polyester yarn
Fabrics: technical
fabrics, non-woven
fabrics, knitted and
5503 20
Description of
product
00
yarn
5205
Including those of
HS codes:
52053300,
52052200,
52054200,
52052300,
52054300,
52051200,
52051400,
52053200,
52051300,
52051100,
52052300,
52052400
yarn
5404
Including those of
HS codes:
54041900,
54041200
Polyester filament
yarn
3
HS Code
5402 33
00
yarn
5509
Including those of
HS codes:
55091100,
55091200,
55092100,
55092200,
55095100,
55095300,
55096200
yarn
5510
Including those of
HS codes:
55101100,
55103000,
55101200
Woven fabrics of
cotton, containing
85% or more by
5208
Including codes:
52081100,
52081200,
woven fabrics
weight of cotton,
weighing not more
than 200 g/m2
Jean fabrics
Woven fabrics of
cotton, containing
85% or more by
weight of cotton,
weighing not more
than 200 g/m2
Kate
65/35, 83/17
52081300,
52081900
5209 22
00
5209
5210 11
Including those of
HS codes:
52091100,
52091200
00
Other woven of cotton 5212
Woven fabrics of
polymer
5407 72
Fabrics of 100%
cotton, cotton
polyester, cotton
polyester
pandex...containing
from 7 to 15 OZ,
abb of 55 inches to
63 inches, yarn
properties of from
02 to 16 Ne
Including those of
HS codes:
52121300,
52122300,
52129000
00
Woven fabrics of
5513
synthetic staple fibres,
containing less than
85% by weight of
such fibres, mixed
mainly or solely with
cotton, of a weight not
exceeding 170 g/m2
Including those of
HS codes:
55132300,
55133100
Woven fabrics of
5514
synthetic staple fibres,
containing less than
85% by weight of
such fibres, mixed
mainly or solely with
cotton, of a weight
exceeding 170 g/m2
Including those of
HS codes:
55142100,
55142200
Other woven fabrics 5515 11
of synthetic staple
fibres, mixed mainly
00 Twill fabrics, plain
weave, dyed
or solely with Visco
rayon
Other woven fabrics 5515 13
of synthetic staple
fibres, mixed mainly
or solely with wool or
fine animal hair
00 twill fabrics, plain
weave for clothes
Other woven fabrics 5515 19
of synthetic staple
fibres, mixed mainly
or solely with Visco
rayon Decree wool
00 twill fabrics, plain
weave for
assemblies
Prepared canvas
5901 90
20
stiffened textile
fabrics
5901 90
90
Fabrics ortherwise 5907
impregnated, coated
or covered
Knitted fabrics of
cotton
4
Sewing thread
0
90 Textile fabrics with
waterproof
coatings
6006 22
00
Dyed
Sewing thread made 5308 10
of coir yarn
00
Tangled thread,
smooth thread
Sewing thread of
5508
synthetic staple fibres
5
Accessories: buttons
,mex,zippers, rubber
bands
Textile labels
5807 10
00
II. FOOTWEAR - LEATHER INDUSTRY:
No.
Priority products
Home products
Name of product
1
soles, shoelaces, toe- Shoelaces of cotton
caps
and polyester
Uppers and parts of
thereof, other than
stiffeners
HS Code
5609
6406 10
Parts of footwear
6406
(including uppers
whether or not
attached to soles other
than outer soles),
removable in-soles,
heel cushions and
similar articles;
gaiters, leggings and
similar articles, and
Description of
product
parts
III. ELECTRONICS:
No.
Priority products
Home products
Name of product
1
HS Code
Description of
product
Basic electronics –
Components, spare 8529 10 40 Used for radio and
optoelectronics
parts of transmissions
television: splitter,
components;
adders, Filters,
transistors,
channel adders
integrated circuits,
Aluminum electrolytic 8532 22 00
Electrical
sensors , resistors ,
capacitors
Capacitors, fixed,
capacitors , diodes ,
variable or
antennas , thyristor
adjustable, (pre-set)
Ceramic capacitors
8532 24 00
Electrical
Capacitors, fixed,
variable or
adjustable, (pre-set)
plastics capacitors
8532 29 00
Electrical
Capacitors, fixed,
variable or
adjustable, (pre-set)
Printed circuit boards 8534
0
10
Printed circuits
RF connectors
8536 69 19
I/O connectors
FPC connectors of
mobile phones
8536 69 19
Diodes, other than
photosentive or light
emitting diodes
8541 10 00
Semiconductor lamp
bulbs, other than
photosentive lamp
bulbs
8541 21 00
Thyristors, diacs and 8541 30 00
triacs, other than
photosentive devices
Electronic integrated 8542
circuits
2
Wires, cables,
headphones and
speakers
Flat magnet wire
Bare copper cables
electronic cables
Optical fibre cables
7408 11 00
Cross-sectional
dimension not
exceeding 50 mm2
7413
8544 42 99
8544 70
TCVN 8665:2011
(transmission by
optical technology
including telephone,
telegraph and radio
relay cables,
submarine)
telephone, telegraph 8544 42 11 Of a kind used for
and radio relay cables,
telecommunications,
submarine)
for a voltage not
exceeding 80V
Electric cables
8544 42 19 Of a kind used for
wrapped with plastics,
telecommunications,
cross-sectional
for a voltage not
dimension not
exceeding 80V
exceeding 300 mm2
telephone, telegraph 8544 42 19 Of a kind used for
and radio relay cables)
telecommunications,
for a voltage not
exceeding 80V
telephone, telegraph 8544 42 20 Of a kind used for
and radio relay cables,
telecommunications,
submarine)
for a voltage
exceeding 80V but
not exceeding
1,000V
Cables, insulated with 8544 42 90 Of a kind used for
plastics, crosstelecommunications,
sectional dimension
for a voltage
not exceeding 300
exceeding 80V but
mm2
not exceeding
1,000V
Electric conductors, 8544 42 90 Of a kind used for
insulated with plastics
telecommunications,
for a voltage
exceeding 80V but
not exceeding
1,000V
telephone, telegraph 8544 49 11 Of a kind used for
and radio relay cables,
telecommunications,
submarine)
for a voltage not
exceeding 80V
telephone, telegraph 8544 49 19 Of a kind used for
and radio relay cables
telecommunications,
for a voltage not
exceeding 80V
telephone, telegraph 8544 49 31 Of a kind used for
and radio relay cables,
telecommunications,
submarine
for a voltage
exceeding 80V but
not exceeding
1,000V
telephone, telegraph 8544 49 39 Of a kind used for
and radio relay cables
telecommunications,
for a voltage
exceeding 80V but
not exceeding
1,000V
Control cables
8708 29 12
Optical fibres, optical 9001 10 10 Of a kind used for
fibre bundles and
telecommunications,
optical cables
other electricity
Headphones
8518 30 10
Earphones
8518 30 20
Box speakers
8518 21 10
Single loudspeakers
mounted in theirs
enclosures
And HS Code of
85182210
8518 21
Multiple loudspeakers, 8518 22
mounted in the same
enclosure
Loudspeakers, without 8518 29 20 Having a frequency
enclosure
range of 300Hz to
3,400 Hz, with a
diameter not
exceeding 50 mm,
for
telecommunication
use
3
Monitors, of all types
Cathode-ray tube
monitor
8528 41
Or HS Code of
852849
IV. AUTOMOBILE INDUSTRY:
No.
Priority products
Home products
Name of product
1
HS Code
Description
Frame – hull – door: Aluminum illuminated 9405 60 90
Used for
punch –late-shaped
signs
motorbikes,
components, trunk,
automobiles
chassis, doors,
Decree traffic signs
doorstep
Labels
3919 90 90
Bumpers and parts
thereof
8708 10 90
Front floor frames
8708 29 95
central floor frames
8708 29 95
front floor frames- left 8708 29 95
Front floor frames -
8708 29 95
right
2
Suspension system:
Tweezers, springs,
dampers
Rear floor frame
8708 29 95
Front floor frame central
8708 29 95
Outer floor frames left
8708 29 95
Outer floor -right
8708 29 95
A-pillars
8708 29 95
B-pillars
8708 29 95
C-pillars
8708 29 95
D-pillars
8708 29 95
Tableau stiffeners
8708 29 95
Non-welded hull of
CKD (completely
knocked down)
8708 29 93
Welded cabs
8707 90 90 Vehicle weight not
exceeding 20 tons
CKD cabs
8708 29 99 Vehicle weight not
exceeding 20 tons
Chassis
8708 99 90 Truck weight not
exceeding 20 tons
Chassis
8708 99 62
Leaf springs and
springs
7320 10 11
Spiral torsion springs 7320 20 00
DIN2094:2006
Used for
automobiles,
machines…
Thickness of from
8 – 30 mm, arbor
diameter of from
50- 300mm
spring ball
Accessory balls
8483 30 30
used for vehicles
whose weight of at
least 1.25 ton
8483 40 00 Used for gears and
gearing, other than
toothed wheels,
chain sprockets
and other
transmission
elements presented
separately; ball or
roller screws; gear
boxes and other
speed changers,
including torque
converters
Balanced balls
8483 99 93
Used for trucks
from 8-70 tons of
weight
springs
8708 99 93
Used for trucks
from 8-70 tons of
weight
For passenger
buses or buses of
from 12-80 seats
For car of from 1-9
seats Spring width:
40 -150 mm Spring
thickness: 5- 45
mm
3
Wheels: Tyres,
aluminum rims
Typres, used for heavy 4011 20
trucks
typres of specialized
cars
4011
Vehicle weight of
2,937 kg to 6,150
kg; outer diameter
of from 1,220 mm
to 3,045 mm
Typres of light trucks 4011
Vehicle weight of
410kg to 3,050 kg;
outer diameter of
from 475 mm to
972 mm
Inner tubes of light
trucks
rims
4
Transmission system:
clutches, gearboxes,
axles, propeller shafts
Vehicle weight of
1,750 kg to 5,525
kg; outer diameter
of from 880 mm to
1,230 mm
gearboxes
4013 10
Vehicle weight of
104 mm to 160
mm kg; inner
diameter of from
305 mm to 385
mm
8708 70 32
8708 40
Transmission tubes
8708 40 92
Components of
clutches
8714 93 10
Gears
8714 93 90
HS14, HS19,
GT10, GT2, HDC
Used for
lubricating
gearboxes
Transmission tubes
Rolling bars
5
Braking systems
7326 90 99
Used for
lubricating
gearboxes
7616 99 99 Used for gearboxes
Cylinder liners
8409 99 44
Brake fluid tubes
8708 30 29
Used for
lubricating
gearboxes
Accelerators, brake or 8708 99 30
clutch pedals
6
Power suppliers:
electric accumulators,
generators
Lead-acid electric
accumulators
Lead-acid terminals
8507 20 99 Of a kind used for
lubricating piston
engines
8507
Of a kind used for
bucket trucks using
electric engines:
capacity of from
2V-100Ah to 2V1000Ah
Wires, connectors,
Control cables
8708 29 12
fuses, sensors auto
Aerials, of a kind used 8529 10 30
control devices,
for cars
processing systems
Electric conductors 8544 30 12
7
Lightening system
and signals
Headlights, of cars
8512 20 10
Headlights, used for 8512 20 99
Lamps, horns, gauges truck not exceeding 1
of all types
ton by weight
horns
8512 30 10
Loudspeakers
8518 21
Horn amplifier
8518 50
Or HS Code of
851829
8
automobile exhaust
systems
Exhaust pipes
8708 92 20
9
Plastics components
articles of plastics
3917 29 00
10
Components of
rubber, dampers
Pipes and hoses, of
rubber
4009 42 90
Gaskets
4016 93 20
Other articles of
plastics
4016 99 14
Airbag clothes
5911 90 90
11
Windshields, wiper
blades, seats
Other articles of
leather of cars
4205
0
40
Furniture and
outdoor furniture
safety glass, tempered 7007
A kind of
toughened glass (
bearing, spring
resistance of 5-8
times higher,
thermal resistance
of 3 times higher)
Windshields,
7007
including front, rear
and side windshields
QCVN
32:2011/BGTVT
Rear-view mirrors
7009
Windscreen wipers for 8512 90 20
vehicles
Parts of safety seat
belts
8708 29 20
Clothing of seats
9401 90 10
Seat plate
9401 90 39
Sets of seats
9401 20
Seats of passengers
9401 20 10 A kind of used for
vehicles
V. MECHANERY ENGINEERING:
No.
Priority products
Home products
Name of product
1
Components and
accessories of
shipping building,
agricultural
machines and
driving machines
HS Code
Typres for agricultural
vehicles
4011
61 10
Typres for industrial
vehicles
4011
62 10
Tubeless types
4011
69 00
Inner tubes for industrial 4013
vehicles
90 99
single-phase electric
motors(watertight)
8501
three-phase electric
motors(watertight)
8501
10
Shipping building:
Description
Of an output of up
to 2.2 kW,
asynchronous
capacitor motors,
short-circuit rotors
Of an output of up
to 1,000 kW,
asynchronous
capacitor motors,
short-circuit rotors
of from 750 vg/ph
to 3,000 vg/ph
wall plates
3925
90 00
BM25, BM50 (
flameproof of B15)
Ceiling plates
3925
90 00
CC25, CC75 (
flameproof of B-0;
B-15)
Boat or dock fenders
4016
94 00
Boat chains
7315
82 00
Cored wire
8311
Studlink anchor
chains with
diameter of 13-36
mm
of NAEH14,
sizes:f2,4, f3,2,
f4,0 mm
of NA71T-1,
sizes:f1,0, f1,2,
f1,6 mm
of NA71T-5,
sizes:f1,0, f1,2,
f1,6 mm
of NA71T-G,
sizes:f1,0, f1,2, f,6
mm
of NA70S,
sizes: f0,8-f1,6mm
Cored rods
8311
Marine boilers
8402
Diesel engines
8408
Of a power up to
50 Hp
Shafts and propellers
8410
90 00 Propeller diameter
up to 2 m
Ships’ derricks
8426
11 00 Lifting capacity up
to 540 tons
Gearbox clutches for
marine vessels
8483
40 20 With diesel engines
Floating docks
8905
90 10 Lifting capacity up
to 20.000 tons
Sheathing of jolly-boats, 8906
made of aluminum alloy
Of NT6013,
NB6013, NA6013,
NA7016, NA7018
sizes: f2,5; f3,25;
f4,0; f5,0-f5,4 mm
12
Steam production
of from 0.5 -35
tons per hour
Sheathing of ships
8906
high quality composites 7019
2
up to 12.500 tons
90 90
Made of prepreg
fabrics of E-glass
fibre for ship
building
8482
80 00
types of 24k and
30k
7411
22 00 Up to Ø 1.500 mm
8417
10 00
For rotationary
furnaces
8417
10 00
For rotationary
furnaces
8481
20 90
Valves, of copper
8481
30 20
Check valves
8481
30 20
Maximum
capacity: 16 kg/
cm2 , temperature
of up to 1200c
Gate valves, of copper
8481
80 61
Maximum
capacity: 16 kg/
cm2 , temperature
of up to 1200c
Ball valves, of copper
8481
80 63
Maximum
capacity: 16 kg/
cm2 , temperature
of up to 1200c
Ball valves, of copper
alloy
8481
80 63
Maximum
capacity: 16 kg/
cm2 , temperature
of up to 1200c
Angle valves, of copper 8481
80 63
Maximum
capacity: 16 kg/
cm2 , temperature
of up to 1200c
Angle valves, of copper 8481
alloy
80 63
Maximum
capacity: 16 kg/
cm2 , temperature
of up to 1200c
Check valves, pumpers 8481
for pipeline elbows and
auxiliary equipment of
water cooling system for
boilers
80 99
machine
Ball rings
components: highstrength bolts, high
Balls, couplings, of
tensile fasteners,
cooper
ball bearings , lining
fabrics, valves,
High-temperature
joints, punch plates,
solenoid valves
variable speed
Panel mounted solenoid
boxes, hydraulic
valves
cylinders
valves, of all types
Parts of valves
8481
90 29
Fabricated steel
Parts of couplings,
7307
elbows, fittings, with a
3
diameter of 2 inches to
8
36 inches
22
Of steel
Parts of couplings,
7307
elbows, fittings, with a
3
diameter of 2 inches to
8
36 inches
92
Of steel
Flat-rolled products of 7225
other alloy steel, of a
width of 60 mm or more
30 90 Manufacturing in
2016
Bars and rods, hotrolled, in irregularly
wound coils, of other
alloy steel
7227
90
0
Manufacturing in
2016
Alloy steel, shaped
7228
70 90 SS400, SS540 from
L80 to L130; Q235
from C80 to C180
VI. ANCILLARY PRODUCTS FOR HI-TECH INDUSTRIES
No.
Priority products
Home products
Name of product
1
2
Types of electronic
components ,
electronic circuits
used for creating
equipment :
Peripheral equipment
, computers ,
electronic appliances,
audiovisual
equipment , solar cells
; microprocessors ;
controllers
(programmable logic
controllers PLC ,
CNC , ... )
HS Code
Description
Solar panel module
8541
40 22 Used for absorbing
solar energy and
convert it into
electricity
Optical disk drives
8471
70 40
New generation
Vibration motors, a 8501
engines: electric
kind of use for mobile
motors, , magnetic
phones
motors, servo motors,
Brushes electric motors 8501
reluctance motors,
linear motors
10 60
10 91
Including CDROM, DVD and
CD-R drives
Types of QK15868-000A, S871961, S8-71957,
S8- 71958, S871969, S8-71983,
SS8-71974, a kind
of use for printers
This appendix is compiled according to current lists of machineries, equipment, materials and
accessories, etc. that have been manufactured by January 01, 2015 of competent Ministries
and Departments. Any suplementation shall be considered adding to this Appendix by the
Ministry of Industry and Trade, and other relevant Ministries and Departments.
This translation is provided by Lawsoft.