Download Tranqwall

Tranqwall
soothing
stimulating
relaxing
The Tranqwall waterfall was designed to be the centerpiece of any room in a home or
office.
Its design is visually captivating and its functionality is soothing and relaxing.
The two transparent waterfall faces form a thin reservoir that is open along the top
edges. This reservoir and the base are filled with water.
Water mysteriously flows out from between the top faces of the waterfall, and then
ripples down the front face, with a tranquil tone.
A body of dense fog floats leisurely from the base (mister / fogger sold separately).
Your eyes are enticed by an array of air bubbles that fumble upwards between the
faces.
A beam of colored light* perfectly accentuates the wall and illuminates the dancing
bubbles.
*The color of the light can be easily changed to blue, yellow, green, or red.
Size:
Width = 31.25”, Depth = 19.25”, Height = 72.5”
Custom sizes are available however the above dimensions are the maximum.
Materials:
The waterfall faces are made of thick, high quality, clear acrylic plastic.
The base and frame are made of thick, high gloss, high quality, colored acrylic plastic.*
Acrylic is much more durable, yet looks like glass.
*Standard colors are black and white.
Construction:
Parts are cut using state-of-the-art computer controlled cutting machines.
All parts are permanently bonded together.
All electrical devices require a standard 110-volt outlet.
Custom logos, graphics, and trim are also available to personalize the waterfall to your decor.
Water Volume:
Face= 3.25 gal (12.3 L),
Base= 11 gal (42 L),
Total= 14.25 gal (54 L)
Weight (waterfall and all components):
Dry= 130 lbs. (59 kg)
Full= 248 lbs. (113 kg)
Warranties:
5 year warranty against mechanical failure of structural components.
Water pump: 3 year, Limited Manufacturers Warranty
Air pump:
Lifetime Limited Manufacturers Warranty
Light fixture: 1 year, Limited Manufacturers Warranty, (does not include bulb)
Set-up:
The Tranqwall comes completely assembled with the exception of the pumps, hoses, and light.
All hoses are precut to size. Installation is approx ½ hour and requires a screw driver.
Accessories:
A mister / fogger may be purchased to visually enhance the base of the waterfall (sold
separately).
Maintenance:
Tranqwall and components require only periodic cleaning (approx. every few months) using
mild dish detergent. To protect and enhance its look “KLEENMASTER” should be used.
Glass cleaner, similar solvents, and abrasives should NEVER be used.
Water should be added as necessary.
Operation:
IMPORTANT: Distilled or purified water should only be used (tap water not recommended).
Three 110V outlets required (Four if mister / fogger is used).
Each component can be used independently or all together (water pump, air pump, light,
mister / fogger)
All components are designed to operate on a continuous basis.
NOTE: All Tranqwall shipments come with clear installation and maintenance instructions.