Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
CONCUR Fortum Engineering: PlantPower Fortum Engineering use a suite of software called PlantPower which have been customised for the purpose of defining the requirements for power plant construction. The design procedure is: Scoping Module In order to meet clients requirements, a scoping module called ScopePower is used for identifying a structure of power plant delivery. This is a logical layout based on KKS code, forming a skeleton of the information technical product model for further study Energy Balance Energy balance studies are made by Fortum Engineering’s process simulation tool Solvo. These results are defining requirements for power plant processes as input data for further design Energy Balance Flow Charts In practice it means, that there is unambigious dependence between energy balance flow charts and IT product model Design Rules A knowledge module holding design rules, design dialogues, plant scope and and artificial intelligence facility based on Design++ is used for initial dimensioning of main equipment in order to fulfil process requirements. The results are presented in the main flow diagram. Dimensions Dimensioning of main equipment continues for over all dimensions of the site so, that suitable plant layout can be selected. The first cost estimate is carried out in order to support decision making at investment level Cost Estimation Knowledge modules support more detailed design on steam turbine plant. Cost estimation on facility level will define costs accurate enough for tendering purpose. Actual cost data is in cost libraries of CostPower, where the commercial software of CM-Pro is used on cost estimation and further budgeting during pre-tender phase Company IMS All design, cost estimation and scheduling information are stored in product model and in the attached relational database. In the CONCUR demonstration data was exchanged with IFC files between project partners: Fortum Engineering, Taylor Woodrow and Skanska