Download Document

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Positional notation wikipedia , lookup

Approximations of π wikipedia , lookup

Elementary mathematics wikipedia , lookup

Transcript
Matter, Measurement, and
Problem Solving
Measurement
and Significant
Figures
Tro: Chemistry: A Molecular Approach, 2/e
What Is a Measurement?
• Quantitative
observation
• Comparison to an
agreed standard
• Every measurement
has a number and a
unit
Tro: Chemistry: A Molecular Approach,
Approach 2/e
3
A Measurement
• The unit tells you what standard you are
comparing your object to
• The number tells you
1. what multiple of the standard the object
measures
2. the uncertainty in the measurement
• Scientific measurements are reported so
that every digit written is certain, except
the last one, which is estimated
Tro: Chemistry: A Molecular Approach,
Approach 2/e
4
Estimating the Last Digit
•
For instruments marked with a scale,
you get the last digit by estimating
between the marks
– if possible
•
Mentally divide the space into ten equal
spaces, then estimate how many
spaces over the indicator the mark is
Tro: Chemistry: A Molecular Approach,
Approach 2/e
5
Tro: Chemistry: A Molecular Approach,
Approach 2/e
6
Significant Figures
• The non-place holding digits
in a reported measurement
are called significant
figures
12.3 cm
has 3 sig. figs.
and its range is
12.2 to 12.4 cm
• Significant figures tell us the
range of values to expect for
repeated measurements
12.30 cm
has 4 sig. figs.
and its range is
12.29 to 12.31 cm
– the more significant figures in a
measurement, the smaller the
range of values
Tro: Chemistry: A Molecular Approach,
Approach 2/e
7
Counting Significant Figures
1. All non-zero digits are significant
– 1.5 has 2 sig. figs.
2. Interior zeros are significant
– 1.05 has 3 sig. figs.
3. Leading zeros are NOT significant
– 0.001050 has 4 sig. figs.
• 1.050 x 10−3
Tro: Chemistry: A Molecular Approach,
Approach 2/e
8
Counting Significant Figures
4. Trailing zeros may or may not be significant
a) Trailing zeros after a decimal point are significant
•
1.050 has 4 sig. figs.
b) Trailing zeros before a decimal point are
significant if the decimal point is written
•
150.0 has 4 sig. figs.
c) Zeros at the end of a number without a written
decimal point are ambiguous and should be
avoided by using scientific notation
•
•
if 150 has 2 sig. figs. then 1.5 x 102
but if 150 has 3 sig. figs. then 1.50 x 102
Tro: Chemistry: A Molecular Approach,
Approach 2/e
9
Significant Figures and Exact
Numbers
• A number whose value is known with
complete certainty is exact
– from counting individual objects
– from definitions
• 1 cm is exactly equal to 0.01 m
– from integer values in equations
• in the equation for the radius of a circle, the 2 is exact
• Exact numbers have an unlimited number of
significant figures
Tro: Chemistry: A Molecular Approach,
Approach 2/e
10
Example 1.5: Determining the
Number of Significant Figures in
a Number
How many significant figures are in each of the following?
0.04450 m
4 sig. figs.; the digits 4 and 5, and the trailing 0
5.0003 km
5 sig. figs.; the digits 5 and 3, and the interior 0’s
10 dm = 1 m infinite number of sig. figs., exact numbers
1.000 × 105 s 4 sig. figs.; the digit 1, and the trailing 0’s
0.00002 mm 1 sig. figs.; the digit 2, not the leading 0’s
10,000 m
Ambiguous, generally assume 1 sig. fig.
Tro: Chemistry: A Molecular Approach,
Approach 2/e
11
Practice − Determine the number of significant
figures, the expected range of precision, and
indicate the last significant figure
• 0.00120
• 120.
• 12.00
• 1.20 x 103
Tro: Chemistry: A Molecular Approach,
Approach 2/e
12
Practice − Determine the number of significant
figures, the expected range of precision, and
indicate the last significant figure
• 0.00120
3 sig. figs. 0.00119 to 0.00121
• 120.
3 sig. figs. 119 to 121
• 12.00
4 sig. figs. 11.99 to 12.01
• 1.20 x 103
3 sig. figs. 1190 to 1210
Tro: Chemistry: A Molecular Approach,
Approach 2/e
13
Multiplication and Division with
Significant Figures
• When multiplying or dividing measurements,
the result has the same number of
significant figures as the measurement with
the lowest number of significant figures
5.02 ×
3 sig. figs.
89.665 × 0.10
= 45.0118 = 45
5 sig. figs.
2 sig. figs.
2 sig. figs.
5.892
4 sig. figs.
÷
6.10
= 0.96590 = 0.966
3 sig. figs.
Tro: Chemistry: A Molecular Approach,
Approach 2/e
14
3 sig. figs.
Addition and Subtraction
with Significant Figures
• When adding or
subtracting
measurements, the
result has the same
number of decimal
places as the
measurement with the
lowest number of
decimal places
Tro: Chemistry: A Molecular Approach,
Approach 2/e
15
2
0
2
5
.
.
.
.
3
0
9
4
45
7
 5.41
975
12 5
5.9
 2 . 2 2 1  5 .7
5.6 7 9
Rounding
•
When rounding to the correct number of significant
figures, if the number after the place of the last
significant figure is
a) 0 to 4, round down
–
–
drop all digits after the last sig. fig. and leave the last
sig. fig. alone
add insignificant zeros to keep the value if necessary
b) 5 to 9, round up
–
–
•
drop all digits after the last sig. fig. and increase the
last sig. fig. by one
add insignificant zeros to keep the value if necessary
To avoid accumulating extra error from rounding,
round only at the end, keeping track of the last sig.
fig.A Molecular
for intermediate
calculations
Tro: Chemistry:
Approach 2/e
Approach,
16
Rounding
• Rounding to 2 significant figures
• 2.34 rounds to 2.3
– because the 3 is where the last sig. fig. will
be and the number after it is 4 or less
• 2.37 rounds to 2.4
– because the 3 is where the last sig. fig. will
be and the number after it is 5 or greater
• 2.349865 rounds to 2.3
– because the 3 is where the last sig. fig. will
be and the number after it is 4 or less
Tro: Chemistry: A Molecular Approach,
Approach 2/e
17
Rounding
• Rounding to 2 significant figures
• 0.0234 rounds to 0.023 or 2.3 × 10−2
– because the 3 is where the last sig. fig. will be
and the number after it is 4 or less
• 0.0237 rounds to 0.024 or 2.4 × 10−2
– because the 3 is where the last sig. fig. will be
and the number after it is 5 or greater
• 0.02349865 rounds to 0.023 or 2.3 × 10−2
– because the 3 is where the last sig. fig. will be
and the number after it is 4 or less
Tro: Chemistry: A Molecular Approach,
Approach 2/e
18
Rounding
• Rounding to 2 significant figures
• 234 rounds to 230 or 2.3 × 102
– because the 3 is where the last sig. fig. will
be and the number after it is 4 or less
• 237 rounds to 240 or 2.4 × 102
– because the 3 is where the last sig. fig. will
be and the number after it is 5 or greater
• 234.9865 rounds to 230 or 2.3 × 102
– because the 3 is where the last sig. fig. will
be and the number after it is 4 or less
Tro: Chemistry: A Molecular Approach,
Approach 2/e
19
Both Multiplication/Division and
Addition/Subtraction
with Significant Figures
• When doing different kinds of operations
with measurements with significant figures,
do whatever is in parentheses first, evaluate
the significant figures in the intermediate
answer, then do the remaining steps
3.489 × (5.67 – 2.3) =
2 dp
1 dp
3.489
×
3.37
= 12
4 sf
1 dp & 2 sf
2 sf
Tro: Chemistry: A Molecular Approach,
Approach 2/e
20
Example 1.6: Perform the Following
Calculations to the Correct Number of
Significant Figures
Tro: Chemistry: A Molecular Approach,
Approach 2/e
21
Example 1.6 Perform the Following
Calculations to the Correct Number of
Significant Figures
Tro: Chemistry: A Molecular Approach,
Approach 2/e
22
Precision
and Accuracy
Tro: Chemistry: A Molecular Approach, 2/e
Uncertainty in Measured Numbers
• Uncertainty comes from limitations of the instruments
used for comparison, the experimental design, the
experimenter, and nature’s random behavior
• To understand how reliable a measurement is, we need
to understand the limitations of the measurement
• Accuracy is an indication of how close a measurement
comes to the actual value of the quantity
• Precision is an indication of how close repeated
measurements are to each other
– how reproducible a measurement is
Tro: Chemistry: A Molecular Approach,
Approach 2/e
24
Precision
• Imprecision in measurements is caused by
random errors
– errors that result from random fluctuations
– no specific cause, therefore cannot be
corrected
• We determine the precision of a set of
measurements by evaluating how far they
are from the actual value and each other
• Every measurement has some random
error, with enough measurements these
errors should
average
out
Tro: Chemistry: A Molecular Approach,
Approach 2/e
25
Accuracy
• Inaccuracy in measurement caused by
systematic errors
– errors caused by limitations in the instruments
or techniques or experimental design
– can be reduced by using more accurate
instruments, or better technique or experimental
design
• We determine the accuracy of a
measurement by evaluating how far it is
from the actual value
• Systematic errors do not average out with
repeated measurements because they
consistently cause the measurement to be
either
tooApproach,
high2/e or too
Tro: Chemistry:
A Molecular
Approach
26 low
Accuracy vs. Precision
• Suppose three students are asked to
determine the mass of an object whose
known mass is 10.00 g
• The results they report are as follows
Looking at the graph of the results shows that Student A is
neither accurate nor precise, Student B is inaccurate, but is
precise, and Student C is both accurate and precise.
Tro: Chemistry: A Molecular Approach,
Approach 2/e
27