Download 105U-4 / 105S-4 Installation Guide Statutory Requirements

+ -
+ -
OUTPUTS
DIO12
DO 4
DO 3
DO 2
DO 1
SOL
GND
BAT+
SOL
GND
Aerial Installation
DIO11
DC Load
2A
DIO9
Unlicensed operation limits the radio
power. High gain aerials may only be
used to compensate for cable losses.
DIO10
Statutory Requirements
EC:
Digital Output
Max 30VDC, 500mA
DC Relay Supply
DIO8
Installation Guide
11-15VDC Supply or Optional
12V Backup Battery

12 Amphour for AC/DC

100 Amphour for Solar
DIO7
12V Solar Panel
Supply max 20VDC
max 30W panel
COM
105U-4 / 105S-4
I/0
WARNING!
EXPLOSION HAZARD
XXXX- 4
DO NOT DISCONNECT WHILE
CIRCUIT IS LIVE UNLESS
AREA IS KNOWN TO BE NON
HAZARDOUS
NOTES
All I/O must be SELV.
CAUTION!
For continued protection against risk
of fire, replace the module fuse only
with the same type and rating
RADIO TELEMETRY MODULE
DIO3
DIO2
DIO1
COM
I/0
DI 4
DI 3
DI 2
DI 1
GND
SUP1
SUP2
SUP1
SUP2
INPUTS
DIO6
2.
DIO5
DIO channels can be wired as
either inputs or outputs.
DIO4
1.
105U-4 / 105S-4 Installation
Power supply: (A) 12-24VAC 1.5 Amp CSA Certified Class 2
(B) 15-30VDC 1.5 Amp CSA Certified Class 2
(C) 11-15VDC Supply or battery
(D) Solar panel with solar battery
Choose option and wire as shown
AC Supply 12-24VAC min
15VAC for Battery Charging.
Do not earth SUP1 or SUP2
connections
+ DC Supply
15-30VDC
min 17VDC
for Battery
Charging
Digital Input
Voltage Free
Contact
OR
Transistor
Device
To Earth
Connection
© ELPRO Technologies Pty. Ltd. 2012 Rev. 1.4