Download Document 8173906

Gavilan College Aviation Electric Panel Project Sheet Name: Date: Build an electric panel using the following documents: Gavilan College Front Panel Gavilan College Panel Base Gavilan College Panel Wiring Schematic Add and wire up a pilot headphone and microphone jacks using the schematic from the PS Engineering PM500EX manual. Provide a parts list of the components used. With an external power supply connected and turned on plus master switch on, provide the following measurements: Power supply voltage: With the panel light at full brightness: The voltage at the base of the transistor: The voltage at the collector of the transistor: The voltage at the emitter of the transistor: The voltage across the collector/emitter junction: The voltage across the base/emitter junction: With the panel light at completely dimmed: The voltage at the base of the transistor: The voltage at the collector of the transistor: The voltage at the emitter of the transistor: The voltage across the collector/emitter junction: The voltage across the base/emitter junction: With the emitter voltage at 9 volts: The voltage at the base of the transistor: The voltage at the collector of the transistor: The voltage at the emitter of the transistor: The voltage across the collector/emitter junction: The voltage across the base/emitter junction: The current supplied by the external power supply is: Master switch on, panel fully dimmed and intercom off: Master switch on, panel fully bright and intercom off: Master switch on, panel fully bright and the intercom on: Instruction