Download Document

Introducing…
The Peelle Wireless Controller
Michael Ryan
Vice President of Sales & Marketing
Purpose of this Presentation
• It’s Peelle specific.
• Discuss the concept of controlling elevator
equipment wirelessly.
• Introduce the Peelle Wireless Controller.
Introduction Video
Wireless
Controller
Brochure
Why did Peelle develop a
Wireless Controller?
• Peelle offers products that are
designed to benefit the elevator
contractor.
• This controller offers elevator
contractors a 40-50% labor
savings.
• The Peelle Wireless Controller
offers something for every
contractor.
Installation Video
The History of
Wireless Technology?
• 1896 Guglielmo Marconi develops the first wireless telegraph system
• 1927 First commercial radiotelephone service operated between Britain
and the US
• 1946 First car-based mobile telephone set up in St. Louis, using ‘pushto-talk’ technology
• 1950s Late in the decade, the first paging access control equipment
(PACE) paging systems established
• 1962 The first communication satellite, Telstar, launched into orbit
• 1992 One-millionth host connected to the Internet, with the size now
approximately doubling every year
• 1998 Ericsson, IBM, Intel, Nokia, and Toshiba announce they will join to
develop Bluetooth for wireless data
The Peelle Wireless Controller
•
•
•
•
•
•
•
•
•
Wireless Communication
VVVF Drive
Closed Loop Feedback
Connect & Play
Self Learning Technology
Machine Room Less (MRL)
Green (LEED)
Smooth Operation
LCD Display
Wireless Communication
Wireless Communication provides constant
communication between all landing doors and
car door; creating a more reliable, truer,
operation.
Wireless technology offers a 40-50% labor
savings. Some markets are paying
$150.00/team hour.
Wireless Communication
• How many landing doors wires are saved?
– 2 per door motor
– All hoistway door controller wires (typically 10 or
more)
• How many wires are still needed?
– 2 for each controller for power
– 4 for each interlock, wired at each floor
VVVF Drive
Variable Voltage, Variable Frequency (VVVF)
Drive utilizing the latest inverter technology and
motor protection.
Soft motor starting and stopping.
Overload, short circuit and grounding protection.
Closed Loop Feedback
Closed Loop Feedback uses true door
positioning (TDP) eliminating the need for limit
switches and sensors.
The doors remember their learned opening in
the event of power failure and self adjust as
chain stretches over time. No re-programming
necessary, “set it and forget it”.
Connect & Play
The controllers come ready for use, just
plug in the door hardware, turn
on the power and the controller is ready
for use.
This offers another labor savings.
Self Learning Technology
Self Learning Technology determines the
acceleration and deceleration rates for each
door, creating a perfectly smooth operation.
This will improve the installation process as well
as easily return the doors to service after a
power failure.
Door / Gate Commissioning Video
Machine Room Less (MRL)
No need for bulky door controllers taking up
valuable space in the Machine Room.
This is a consultant “Hot Button”.
Only 1 elevator professional is needed to trouble
shoot at each landing.
Green
This wireless door system requires less
energy than traditional start / stop methods
and requires less material for installation.
Check your Specification for LEED
requirements.
Smooth Operation
Utilizing the full power of VVVF Drive and the
benefit of self learning - self adjusting
technology creates a smooth open and close
sequence.
Smooth operation is quiet and improves life
of equipment due to less slamming and
reduced contact of mating parts.
LCD Display
On board diagnostics
displays a live status
of all related
equipment.
Easy to trouble shoot
and field test.
Sequence of Operations Video
What job is best suited for the Peelle
Wireless Controller?
• Any job where Peelle Doors are existing or
will be provided.
• Is the Peelle Wireless Controller available
for competitive equipment?
Yes, assuming Peelle re-motorizes the
existing equipment
When is it available?
• Peelle is in the process of numerous field
trials.
• Rollout is planned for 1st Quarter 2011.
• When available The Peelle Wireless
Controller will be standard equipment.
What will it cost?
• There is no up-charge for the Peelle
Wireless Controller (average 3-stop).
• The Peelle Wireless Controller will be
standard equipment.
• Additionally, the more stops the more labor
savings for the elevator contractor.
How do I request a price?
•
US projects 1-800-787-5020
–
–
•
Bonnie Mulligan x 334 [email protected]
Brad Hunt x 337 [email protected]
Canadian projects 1-800-787-5020
–
–
Len Houwen x 220 [email protected]
Karen Long x 221 [email protected]
Frequently Asked Question
•
Are any changes required to current hoistway
space requirements?
–
•
No
What about possible wireless interference?
–
•
We haven’t experienced any interference issues. There are many
different user selectable wireless channels to eliminate potential
interference.
How is Fire Service handled?
–
•
Fire service is controlled by the elevator controller. The Peelle
Wireless Controller operates in slave mode.
Where is the controller mounted?
–
The controller can be mounted on return wall or side wall of the
hoistway; wherever is most convenient.
Frequently Asked Question
•
Card Readers
–
•
The door controller does not interface with card readers. This is
handled by the elevator controller. It is also very uncommon on
freights.
How are we addressing Battery Backup?
–
•
Same Reynolds & Reynolds backup interface Peelle offers today with
our other controllers.
What is the “wired” Peelle Wireless Controller
interface with the Elevator Controller?
–
From the car gate controller on top of the car. MCE, JRT and
Northern Elevator have all chosen to interface to the car door
controller via their own car top control module.
Questions?