Download Using a DSLR to Detect a Known Exoplanet

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Interferometric synthetic-aperture radar wikipedia , lookup

Quill (satellite) wikipedia , lookup

Transcript
1
Using a DSLR to Detect a
Known Exoplanet
The equipment, tools, and processes needed -
Brent Maynard
[email protected]
2
What are exoplanets?
 Exoplanets are planets that have been discovered outside of
our own solar system.
 There are almost 1800 known exoplanets as of June, 2014.
3
Types of exoplanets
 The first exoplanets discovered were Jupiter class planets,
large gas giants.
 More recently, using new technology, multiple earth-like
planets have been discovered.
4
Techniques used to discover an
exoplanet
 There are several techniques used in discovering an
exoplanet.
 The two most common are measuring the radial velocity of
the host star relative to earth, and transit photometry.
5
Radial velocity technique
 As a planet orbits around their host star, the star will wobble
back and forth. Subtle changes in the star’s red-shift can be
detected, confirming the presence of an exoplanet.
6
Transit photometry technique
 The transit photometry technique detects the transit of a
planet orbiting a host star, by measuring a decrease in the
stars brightness, as a planet transits the star as seen from
earth.
7
Can we detect a known exoplanet
using basic equipment and tools?
 The answer is yes.
 Using a DSLR, telephoto lens, a tracking mount, and some
photometry software, we can detect an exoplanet transit
using the Transit Photometry method.
8
What is Photometry?
 Photometry is a technique used in astronomy measuring the
flux, or intensity of an astronomical object's electromagnetic
radiation.
 For exoplanet detection, we are measuring the dip in the
amount of light received by the camera sensor.
9
DSLR setup
 Because the dip in the amount of light received is very small,
we need to capture data at a resolution that can be
processed to verify a transit event took place.
 Therefore, we must capture the images as RAW images from
the camera, we cannot use JPG images to perform the
photometric analysis.
 We also don’t want to capture the images at a high ISO
setting to raise the noise level too high that could interfere
with the image data.
 Iso800 has worked well for my attempts.
10
DSLR Raw image format vs JPG:
First the cmos/ccd Bayer Matrix
11
DSLR Raw image format vs JPG:
First the cmos/ccd Bayer Matrix
12
DSLR Raw image format vs JPG:
First the cmos/ccd Bayer Matrix
DSLRs typically save their Raw image files in 12 or 14 bit
images
If you have your DSLR set to take JPG images, they are saved
in 8 bit images.
13
DSLR Raw image format vs JPG:
First the cmos/ccd Bayer Matrix
When the DSLR takes a picture, and you have it set to JPG, the
processor inside the camera will convert the Raw image into a
JPG and then toss the Raw data.
At 8 bits, each pixel has 2^8 levels of brightness.
2^8 is 256.
In Raw mode, current DSLRs save images as 14 bit images,
2^14 is 16,384 levels of brightness for each pixel.
14
How do we know which stars have
exoplanets?
 The Exoplanet Transit Database
 http://var2.astro.cz/ETD/predictions.php
 My first attempt – HD189733b using Canon T3i and a
300mm telephoto lens.
15
HD189733b
 Is a fairly bright star, short transit duration, large (relative) dip
in the light curve, and easy to find in the sky.
16
HD189733b
17
HD189733b
18
Second attempt HAT-P-3b
 Very challenging, dim star. Was not sure I had detected the
transit of the exoplanet until I processed the data 8 times.
 I used a 180mm telephoto lens for this transit attempt.
19
Photometric Software
 IRIS – Free astronomy software, very powerful image
processing software, but is not real user friendly.
 Spreadsheet software, Excel or Numbers to make the
graphs.
20
IRIS process
 http://www.astrosurf.com/buil/us/iris/iris.htm
 Set working directory in IRIS
 Decode the RAW files
 Register (align) the images
 Perform photometric analysis using 1 target star and 4
reference stars
 Save photometry data for curve plotting
 Choose different reference stars to confirm results.
 Process reference star to also confirm transit detected.
21
Questions