Download WB-35/SOX/DT Cat. no. WB-35/SP

WB-35/SOX/DT
Flux- und Oberflächentechnik GmbH
Eltviller Landstr. 22, 65346 Eltville, Germany
Tel.: +49 (0)6123-7046-0
Fax: +49 (0)6123-7046-15
www.emilotto.de
Cat. no.
2125
WB-35/SP
Cat. no.
2136
Aqueous, low solids flux for wave soldering with halogen free
activators and resin free (WEEE/RoHS conformant)
DIN EN 61190-1-1: (IEC OR/LO) or type 2.1.3.A under ISO 9454
Aqueous, low solids flux for wave soldering (low VOC) with halogen free activators and resin free. (WEEE/RoHS conformant)
DIN EN 61190-1-1: (IEC OR/LO) or type 2.1.3.A under ISO 9454
WB-35/SOX/DT has a high activity and is characterized by
outstanding wetting properties. The flux is particularly suited to
treating circuit boards of variable quality in terms of solderability.
Application is by using a spray fluxer.
WB-35/SP exhibits high activity and delivers outstanding wetting
properties which are achieved due to our specially developed special
combination of carrier substances. This flux is also well suited to
treat circuit boards of variable soldering quality. Application is by
using a spray fluxer.
Technical data:
Technical data:
Appearance:
Solids content:
Density at 20 °C:
Acid number:
Activators:
Solvent:
Flashpoint:
clear, colourless liquid
3.5 wt%
1.020 (±0.02) g/ml
28.0 - 32.0 mg KOH/g
(di)carboxylic acids
water
not applicable
Appearance:
Solids content:
Density at 20 °C:
Acid number:
Activators:
Solvent:
Flashpoint:
Picture may differ from original product.
Packing units:
Cans containing 5 or 20 liters each.
Liters
clear, colourless liquid
3.5 wt%
0.98 - 1.00 g/ml
28.0 - 32.0 mg KOH/g
(di)carboxylic acids
water based
not applicable
Picture may differ from original product.
Packing units:
Cans containing 5 or 20 liters each.
Liters
WB-30/EK-1405
Ecological Flux for
Electronics Production
Our customers have repeatedly expressed the need for
ecological and sustainable products, normally during
the course of customer specific flux development. As a
Company orientated and totally committed to sustainability and customer requirements, we have expanded
our research and development work and focused on the
formulation and production of organic fluxes.
Our aim was not just to develop an ecological range of
products, but also an environmentally compatible production combined with simplified cost effective transport
and storage. Our Green Line products are water based
and thus completely biodegradable. Furthermore, they
do not fall into the hazardous goods class and thus can
be transported and stored in the conventional manner.
This simple conventional transportation and storage
represents a considerable added value advantage for
our customers.
Products within the Green Line range, contain fluxes for
both selective and wave soldering, and all our fluxes
can be used on commercially available production systems. Your soldering results will correspond to those
currently achieved with alcohol based fluxes, and a
switch to an ecological water based flux is possible for
you with some ease.
We‘ll gladly support you during this changeover and
help you to find the right product for your sustainable,
cost saving, environmentally friendly production
Cat. no.
2106
Aqueous, low solids flux for wave soldering with halogen free
activators and low resin content. (WEEE/RoHS conformant)
DIN EN 61190-1-1: (IEC OR/LO) or type 2.2.3.A under ISO 9454
WB-30/EK-1401
Cat. no.
2107
WB-35/SOX
Cat. no.
2118
Aqueous, low solids flux for wave soldering with halogen free activators and low synthetic resin content (WEEE/RoHS conformant)
DIN EN 61190-1-1: (IEC OR/LO) or type 2.2.3.A under ISO 9454
Aqueous, low solids flux for wave soldering with halogen-free
activators and resin free. (WEEE/RoHS conformant)
DIN EN 61190-1-1: (IEC OR/LO) or type 2.1.3.A under ISO 9454
WB-30/EK-1405 was developed for use on wave soldering
machines and has a relatively high activity level. The low resin
content ensures a protective covering for the flux residues thereby
positively enhancing the surface resistance results. Application is by
using a spray fluxer.
WB-30/EK-1401 was developed primarily for use on wave soldering
machines and has a relatively high activity level. Practice has shown
that with correct application, the washing / cleaning of circuit boards
soldered with this flux can be largely dispensed with due to the very
low solids content giving the assembled board a very good cosmetic
appearance after soldering. This low resin content also ensures a protective covering for the flux residues thereby positively enhancing the
surface resistance results. Application is by using a spray fluxer.
WB-35/SOX has a high activity level and this flux is well suited to
treat circuit boards of variable soldering quality. Live production
has shown that with the correct application, washing / cleaning of
circuit boards soldered with this flux can be largely dispensed with
due to the very low solids content and cosmetic appearance of the
assembled board. Application is by using a spray fluxer.
Technical data:
Technical data:
Technical data:
Appearance:
Solids content:
Density at 20 °C:
Acid number:
Activators:
Solvent:
Flashpoint:
clear, pellucid liquid
3.0 wt%
1.000 (±0.005) g/ml
21.0 - 25.0 mg KOH/g
(di)carboxylic acids
water
not applicable
Appearance:
Solids content:
Density at 20 °C:
Acid number:
Activators:
Solvent:
Flashpoint:
Picture may differ from original product.
Packing units:
Cans containing 5 or 20 liters each.
Liters
clear, pellucid liquid
3.0 wt%
1.000 - 1.02 g/ml
24.0 - 27.0 mg KOH/g
(di)carboxylic acids
water
not applicable
Appearance:
Solids content:
Density at 20 °C:
Acid number:
Activators:
Solvent:
Flashpoint:
Picture may differ from original product.
Packing units:
Cans containing 5 or 20 liters each.
Liters
clear, colourless liquid
3.5 wt%
1.020 (±0.02) g/ml
28.0 - 32.0 mg KOH/g
(di)carboxylic acids
water
not applicable
Picture may differ from original product.
Packing units:
Cans containing 5 or 20 liters each.
Liters