Download Exothermic Connections

Exothermic Connections
ERICO CADWELD exothermically welded connections are engineered to provide a permanent, molecular bond that will not loosen or
corrode. The connections are designed to maintain for the life of the conductor and/or installation. The ERICO CADWELD connection
has a current carrying capacity equal to or greater than that of the conductor and will withstand repeated fault currents without
failing during operation. Once completed, installers can clearly ensure quality assurance by visual inspection of the new connection.
With reliable connections that consistently exceeded IEEE® 837 2014 EMF test requirements as certified by an independent lab,
ERICO CADWELD is the ultimate welded connection.
Standard Molds
Heavy Duty Molds
ERICO CADWELD standard graphite
molds are designed and engineered
for thousands of connection styles.
Heavy duty connections use a larger
size connection cavity in the mold
and a larger size welding material
than the equivalent standard duty
connection.
ERICO CADWELD EXOLON
Reduced-Emission Molds
Cathodic Molds
ERICO CADWELD EXOLON
connections are designed and
engineered to virtually eliminate
reaction smoke. A unique electronic
starting system makes this an ideal
solution for sensitive applications.
ERICO CADWELD cathodic protection
connections are designed and
engineered for pipelines and metal
structures requiring corrosion
protection. They use a special
welding material alloy to minimize
heat effect on steel pipes.
High Voltage Molds
ERICO CADWELD ONE SHOT
Better than mechanical connections
and less labor intensive than MIG or
TIG welding, ERICO CADWELD high
voltage connections are ideal for high
voltage applications.
The ERICO CADWELD ONE SHOT is a
convenient, single-use ceramic mold
and welding material connection
package designed primarily to
connect small conductors to each
other or to a ground rod.
ERICO CADWELD MULTI
ERICO CADWELD MULTI is a
multifunctional mold package and
universal mold crucible capable
of performing a wide range of
connections.
Molds and Accessories for
Usage on Railway Properties
Introduced in 1939 to simplify the
installation of rail bonds, continuous
product development and innovation
allows ERICO to maintain a global
leadership role in exothermically
welded connections to the rail and in
the track wayside.
IEEE is a registered trademark of The Institute of Electrical and Electronics Engineers, Inc.
WARNING
Pentair products shall be installed and used only as indicated in Pentair’s product instruction sheets and training materials. Instruction sheets are available at erico.pentair.com and
from your Pentair customer service representative. Improper installation, misuse, misapplication or other failure to completely follow Pentair’s instructions and warnings may cause
product malfunction, property damage, serious bodily injury and death and/or void your warranty.
© 2016 Pentair All rights reserved
Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates.
All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.