Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
solar panels • solar kits • mounting brackets • accessories Biard 80W Solar Panel PRODUCT FEATURES • 80W Peak Power • Fitted with Solar Cable & MC4 Connectors • Fully Waterproof • Ideal for Boats, Caravans & Motorhomes • Perfect for 12V Battery Charging PRODUCT DESCRIPTION Ideal for 12V battery charging in caravans, boats and sheds as well as a range of other applications too, this 80W solar PV panel is made up of 40 125x78mm Polycrystalline Silicon solar cells that will provide the maximum amount of power but in the smallest module size, which helps to save space. Protected by 3.2mm low iron tempered glass this 80W solar panel will generate more power by reducing the amount of light which is reflected from the module. The 80W solar panel also has two built-in bypass diodes, which allow the panel to continue generating even though it may be partly shaded. Available in silver, black or white frame to match the colour of the surface it is mounted on. All Biard products are TÜV approved. solar panels • solar kits • mounting brackets • accessories PRODUCT SPECIFICATION* Brand Biard Solar Product type Solar Panel Wattage (w) 80 Frame Colours White – Black - Silver Dimensions (mm) 1197 x 535 x 35mm Pack size 1 Weight (kg) 8.5 Peak Power (Pmax) 80 Polycrystalline Silicon Cell Type Maximum Power Voltage (Vmp) 19.5V Maximum Power Current (Imp) 4.10A Open Circuit Voltage (Voc) 24.38V Short Circuit Current (Isc) 4.37A Maximum System Voltage (V) 1000VDC Nominal Operating Cell Temp 48°C±2°C Fitted Cable 750mm Positive & 750mm Negative Fitted Connectors Male & Female MC4 Waterproof Connectors Waterproof Yes 40(125*78mm) Solar Cells *Data at STC (Standard Test Conditions) SAFETY INFORMATION • Use only at stated voltages • Do not drop • Never touch live terminals • Do not cross the polarity • Use correct connectors • Avoid access mechanical stress • Only use for intended purpose • Do not remove the solar cells • Do not remove the fitted MC4 connectors • If unsure consult a trained electrician