Download CC1000 Brochure

CC1000
An ultra low power, single-chip RF transceiver for use in the 300 to 1000 MHz frequency bands
The CC1000 has been specifically designed to be used in low power battery
operated systems and is the perfect choice for low-cost applications.
A unique UHF RF Transceiver
The CC1000 is a true single-chip UHF transceiver
designed for very low power consumption and low
voltage operation. Based on a pure 0.35 μm CMOS
technology, the CC1000 RF transceiver offers a
unique combination of low cost and high integration,
performance and flexibility, thus setting a new standard for short-range wireless communication devices.
The CC1000 is designed primarily for FSK systems
in the ISM/SRD bands at 315, 433, 868 and 915 MHz,
but can easily be programmed for operation at other
frequencies between 300 MHz and 1000 MHz. The
CC1000 supports data-rates up to 76.8 kbps.
Ideal for battery applications
the output power. In power-down mode, the CC1000
draws merely 0.2 μA, an important feature for battery
applications.
RF Transceiver
WORLD-CLASS DEVELOPMENT TOOLS
The CC1000 Development Kit makes it very easy to
evaluate the performance of the CC1000 chip and
designers can quickly develop their own RF modules based on this reference design. The SmartRF®
Studio software package, which is included, provides the flexibility needed to automatically generate configuration data used by the microcontroller.
Applications
•Home automation
•Remote keyless entry
The perfect choice for low-cost
applications
•Automatic meter reading
The low power consumption and the high
integration level make the CC1000 ideal for
any low-cost battery operated system. Since
very few external components are required
to make a complete transceiver, the CC1000 is
the perfect choice for even the smallest size
applications.
•Toys and PDAs
•Wireless alarm and security systems
•Audio/voice
•315/433/868/915 MHz SRD band systems
The CC1000 operates from 2.1 – 3.6 V making it ideal
for battery applications using e.g. single lithium 3 V
coin cells. The current consumption is only 7.4 mA
in receive mode and from only 5.3 mA (-20 dBm) to
26.7 mA (+10 dBm) in transmit mode depending on
SmartRF®03 - Product line
Features
GENERAL CHARACTERISTICS
Parameter (433/868 MHz, 3.0 V, 25°C)
Min
Typ
Max
Unit
OPERATING CONDITIONS:
Frequency range
300
1000
MHz
Data rate 0.6
76.8
kbps
-20
10/5
dBm
0
65
kHz
Tx mode:
Output power FSK separation Rx mode:
Receiver sensitivity, 1.2 kbit/s
-110/-107
dBm
Power Supply:
Supply voltage 2.1
Current consumption, RX
3.6 V
7.4/9.6
mA
Current consumption, TX, -20 dBm
5.3/8.6
mA
Current consumption, TX, -5 dBm 8.9/13.8 mA
Current consumption, TX, 0 dBm 10.4/16.5 mA
Current consumption, TX, 5 dBm 14.8/25.4 mA
Current consumption, TX, 10 dBm 26.7/- mA
Current consumption, power down 0.2 1
μA
• Single-chip RF transceiver
• Programmable frequency (300-1000 MHz)
• Very low current consumption (RX: 7.4 mA)
• Very few external components required
• Low supply voltage (2.1 – 3.6 V)
• High receiver sensitivity (-110 dBm)
• RSSI output
• Integrated bit synchronizer
• FSK data rate up to 76.8 kbps (NRZ)
• Programmable output power ranging from
-20 to 10 dBm
• Programmable frequency in 250 Hz steps
• Crystal temperature drift compensation possible without use of external TCXO
• Suitable for multi channel systems and
frequency hopping protocols
• No external RF switch or IF filter required
• Single-port antenna connection
• Small 28-pin TSSOP package
• Complies with EN 300 220 and FCC
CFR 47, part 15
APPLICATION CIRCUIT DIAGRAM
ABOUT CHIPCON
Chipcon is a leading international semiconductor company that designs, produces and
markets high performance standard radio
frequency integrated circuits (RF-ICs) for use in
a variety of wireless applications in the 300 to
1000 MHz and 2.4 GHz frequency bands.
Chipcon targets both consumer electronics and
home and building automation end markets and
has a strong position within both proprietary
and standards-based radio technologies.
BLOCK DIAGRAM
Chipcon Group ASA is the parent company and
holding company that controls the activities of
its wholly owned subsidiaries Chipcon AS and
Chipcon Inc. Chipcon's products are distributed
worldwide and we are represented at 55
locations in 31 countries.
Gaustadalléen 21, N-0349 Oslo, Norway
Tel: +47 22 95 85 44 Fax: +47 22 95 85 46
www.chipcon.com E-mail: [email protected]
Rev.no.: 3.0 - 2004/06