Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
DATASHEET DigiMod® 3000PFC High Power Modular System For Professional Applications touring applications and/or multiple countries compliant products. KEY FEATURES 9 Power Factor Correction (PFC): easy and error proof connection to mains voltage 9 Modularity: separated power supply and amplification stage for easy and flexible integration 9 Multistage architecture: possibility of feeding multiple amplification stages with a single power supply unit for multiple channels applications 9 Power Output: the maximum available in the market 9 Compact size and EMI/safety certification: for quick and easy product developments 9 High quality audio: fixed frequency modulation design for predictable high end performances 9 High efficiency/Low consumption 9 Comprehensive/smart protection features: thermal, overcurrent, non audio signals 9 High Performances Optional DSP board 9 High Performances Ethernet Based Digital Audio Routing and control Optional board APPLICATIONS • Line arrays, where large amount of power is needed together with the maximum flexibility in configuring the single array’s elements, thanks also to a high performances DSP board option. Worldwide mains voltage operation with Power Factor Correction (PFC), is a plus to avoid a lot of headaches to product’s engineers when developing • Multiways active loudspeakers and/or multiamplification systems can take advantage of the support of multiple amplification stages using a single power supply module in a daisy chain configuration, keeping a minimum space requirement and single point of supply. • Amplified mixers, modular amplifiers and/or active studio monitor speakers can take advantage of the outstanding output power level and the multistandard support as far as mains voltage is concerned. FUNCTIONS Thermal protection (Power limiting, Thermal shutdown) Short-circuit / overload output protection Clip limiter Permanent signal limiter High frequency protection Auxiliary output voltage (±12V regulated, 350mA max) Bypass line outputs for external active/passive filters Mute command Temperature controlled Fan outputs (2 outputs on Power Amplifier, 1 output on power Supply) DSP based plugin optional board Output Current Monitor available Mains overvoltage tolerance up to 400 Vac Multiple Amplifier Units drive capability POWER SPECIFICATIONS 8Ω 4Ω EIAJ test – 1 kHz, 1% THD 2 x 1100 W 2 x 1700 W Continuous – 1 kHz, 0.5% THD 2 x 1000 W 2 x 1400 W OUTPUT POWER per channel (measured @230Vac) BRIDGED MODE configurations: EIAJ test – 1 kHz, 1% THD DIGIMOD3000PFC_DATASHEET_0608_EN 16 Ω 8Ω 1 x 2200 W 1 x 3400 W www.powersoft-audio.com 1 DigiMod 3000PFC Datasheet GENERAL SPECIFICATIONS Mains Voltage Consumption Power Factor (4Ω) Max output current draw Max aux supply current draw Cooling Max operating ambient temperature AC 85V – 270 V, 50/60 Hz with PFC 900 VA (1/8 max output power @ 8 Ohm Bridged) better than 0.90 (full power) 52 A 350 mA Temperature controlled continuous variable speed fan 40°C power supply unit 216x122x51 mm - 8,5x4,8x2 in amplifier unit 146x122x51 mm - 5,75x4,8x 2 in power supply unit 1.5 kg (3,3 lbs) – 1.6 kg (3,527 lbs) amplifier unit 0.8 kg (1,76 lbs) – 0.9 kg (1.98 lbs) External dimensions Net Weight - Shipping Weight AUDIO SPECIFICATIONS Input impedance Input sensitivity @ 8Ω Gain Frequency response S/N ratio 10 kΩ Balanced to ground 1,04 VRMS / 2,56 dBu 38 dB (voltage gain: x80) 5 Hz - 25 kHz (+/-3dB) for 1W @ 8Ω > 108 dBA (20-20K Hz, A weighted) Slew Rate @ 8 Ω Damping factor Distortion Max Output Voltage Efficiency Output type 30V/μs input filter bypassed 20 Hz – 1000 Hz > 200 <0.5% (THD, DIM, SMPTE) 82.5 VRMS 75% (typical) Unbalanced to ground Powersoft reserves the right to make improvements in manufacturing or design which may affect product specifications. APPLICATION EXAMPLES Stereo / Biamp 4Ω 1700 W Multiways Systems or Line Arrays AMP UNIT AMP UNIT POWER SUPPLY 4Ω 1700 W POWER SUPPLY AMP UNIT TOTAL POWER 4000 W Subwoofer (Bridged Mode) POWER SUPPLY AMP UNIT 8Ω 3400 W AMP UNIT Powersoft S.r.l. Via Enrico Conti, 5 Scandicci (FI) – Italy TEL: +39 055 7350230 FAX: +39 055 7356235 [email protected] DIGIMOD3000PFC_DATASHEET_0608_EN www.powersoft-audio.com 2