Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Battery specification / Fiche technique Part No: MOT129 LEAD ACID BatterY for motorcycle YTZ14S / GTZ14S 12V 11.2Ah MAIN INFORMATION / INFORMATIONS GéNéRALES BRAND / MARQUENX TECHNOLOGY / TECHNOLOGIE Plomb étanche AGM NOMINAL VOLTAGE / TENSION NOMINALE 12V Nominal Capacity / Capacité nominale 11.2Ah DIMENSIONS ( ± 2 mm) / DIMENSIONS ( ± 2 mm) • Length / Longueur 150± 2 mm (5.31 inches) • Width / Largeur 87 ± 2 mm (2.95 inches) • Height / Hauteur 110 ± 2 mm (5.47 inches) • Total height with terminals / Hauteur totale (avec cosses) 139 ± 2 mm (5.47 inches) weight ( ± 2 %) / Poids ( ± 2 %) Approx. 3.9 kg (8.60lbs) Electrolyte: 0.6l (included) terminaL / type de cosses 12 TECHNICAL INFORMATION / INFORMATIONS TECHNIQUES CAPACITY / CAPACITé 11.2Ah en C10 CCA : 230A self discharge / auto DéCHARGE Approx 12%/months (25°C (77°F)) Charging Methods / Full Charge • Constant-Voltage Charge: Initial charging current: Less than 2.7A • Voltage: 14.40 V ~ 15.00 V at 25°C (77°F) • Charging time: 16 ~24h n 12 / Terminal • Constant-Current Charge: Charging current: When charging voltage up to 15.60V, continue to charge 2h. Unité : mm / Unit: inches Charging Methods / Floating Charge No limit on Initial charging current • Voltage: 13.50 V ~ 13.80 V at 25°C (77°F) Capacity vs temperature / capacité selon la température 40°C (104°F) 106% 25°C (77°F) 100% 0°C (32°F) 86% • High performance and dry charged high quality and flooded battery • Low maintenance • Powerful 130 cold cranking amps • Shipped without battery electrolyte pre-charged and ready to install • Replaces 12N9-4B-1 conventional battery www.enix-energies.com • Date : 13-11-2015 • Rev.No : A1 l 1/1 OUTLINE SAFETYWARNING:USE ONLYWITHINTHEALLOWED PARAMETERS.Do not short circuit or over-load the battery.Charge only using an approved charger designed specifically to charge this battery.Do not heat above maximum temperatures indicated.Never crush,mutilate,puncture or abuse the battery. Do not dismantle the pack or disable any of the protective devices or circuits. DO NOT USE THE BATTERY IF YOU SUSPECT IT MAY BE FAULTY OR DAMAGED. © Copyright Enix Energies 2005. NB: This document and the product design are the intellectual property of Enix Energies. No document or design may be copied or used for commercial purposes without written permission of Enix Energies. Users must satisfy themselves, by means of testing etc, that products are suitable for their application. Data in this document is for general guidance only; consult cell manufacturers data for definitive information. Information is given free of charge and in good faith, but no responsibility can be accepted for any errors or omission or costs or losses or liabilities arising from the use of this information. All business is conducted to Enix Energies terms and conditions only.