Download Converter Type TIV

Accessories for Converter Type TIV
Transmission Workhead
Transformer Type HK
High-current isolating
can be supplied with
electrical or pneumatic
actuation.
Air-cooled coaxial High-Current Cable
Workhead transformer
adjusting the inductor
voltage. Available in
different sizes.
EMA Indutec GmbH
Compact Capacitor Switch
Coaxial, flexible highcurrent cable. Ideal for the
interconnection of converter and external capacitors.
Applicable for minor and
medium currents.
Coaxial Transmission Workhead Transformer
provided with Connecting Cable
For the electromotive
compensation adjustment.
Coaxial high-current
cable for the interconnection of converter and
application. Applicable
for medium and high
currents.
IGBT converters with capacities ranging from 20 kW up to
20 MW and frequencies from 1 Hz to 400 kHz
▪▪
▪▪
▪▪
Heating
Melting
Forging and forming
Hardening and annealing
Replacement of old and external devices
Top quality from one source
▪▪
▪▪
▪▪
▪▪
▪▪
Over 70 years of experience in heat treatment
Over 10,000 induction systems in long-term operation worldwide
Development and manufacture from a single source
DIN/ISO and VDA certified
Efficient project and quality management from the first question to subsequent service
Quality
Made in Germany
Converter Type TIV
Water-cooled coaxial High-Current Cable
IGBT converters with digital power inverter control
▪▪
Tel. +49 (0) 6226 788-0
Fax +49 (0) 6226 788-100
[email protected]
www.ema-indutec.com
Transmission workhead
transformer with fixed
transmission ratio and
provided with flexible
connecting cable. Ideal for
scanning inductors.
▪▪
Petersbergstraße 9
74909 Meckesheim
Germany
State of the art transistor technology
with digital inverter control
EMA Indutec, LLC
39205 Country Club Drive,
Farmington Hills, MI 48331
USA
Tel. +1 734 233 5297
Fax. +1 734 459 9851
[email protected]
www.ema-indutec.com
EMA Induction Technology
Beijing Co., Ltd.
Shahe Industrial Area,
Changping District
Beijing 102206
China
Tel. +86 (10) 8070 2110
Fax +86 (10) 8070 2010
[email protected]
www.ema-indutec.com.cn
TIV E-02/2016 - Subject to model, and program as well as technical changes and errors.
High-Current Isolating
Converter Type TIV
Frequency Converter for the following
applications
▪▪
▪▪
▪▪
▪▪
▪▪
▪▪
Hardening
Tempering
Melting
Forging
Heating of cables and wires
Drying of surfaces/ coating
▪▪
Glass melting
State of the art converter technology
Benefits due to the new converter controller
▪▪
▪▪
▪▪
Power range from 10 kW up to 20 MW
Nominal frequency from 1 Hz to 400 kHz
Range of performance from 0.5 bis 1.2 of the nominal frequency
▪▪ cos phi nearly 1 on the net in case of full and part load
▪▪ Digital converter control
▪▪ Plain language
▪▪ For each power inverter controller, four nominal frequencies with various capacities can be saved
▪▪
Examples of Use
Advantages when using EMA -TIV frequency
converters
▪▪
Converter for channel furnaces with fixed frequency of 50 Hz
▪▪ Power regulator with selection of four fixed frequencies
▪▪ For example: 500 Hz, 700 Hz, 1.000 Hz, 2.000 Hz
▪▪ Parallel oscillating circuit converter for hardening, forging, smelting, heating
▪▪ Examples of nominal frequencies: 500 Hz, 1 kHz, 3 kHz, 10 kHz, 20 kHz, 30 kHz
▪▪ Standard oscillating circuit converter – possible operating frequencies range from 40 to 400 kHz
▪▪ Any number of inverters of various sizes and frequencies can be combined with a rectifier/grid connection.
▪▪ For example: A rectifier/grid connection for 1.000 kW combined with 4 x 250 kW inverters – each individually adjustable.
One uniform control component for all ranges of frequency
▪▪ Parameterization via software
▪▪ Ethernet, USB and RS232-interfaces available
▪▪ Remote maintenance via internet or modem
▪▪ Adjustment or modification of the operational parameters via remote control
▪▪ Error memory with 200 memory capacities
▪▪ Actual value memory with integrated linde
recorder
▪▪
Low recall due to the uncontrolled B6 rectifier, cost savings due to high cos phi of almost 1 with full and partial loads
▪▪ Low service and maintenance costs thanks to universal, digital converter controller
▪▪ A controller for all ranges of frequency and capacity, digitally parameterised, bus interfaces integrated
▪▪ Remote maintenance reduces service time and machine downtimes
▪▪ Converter Show Software, remote access, error memory for maximum availability and reliability of operation
▪▪ Indirect semiconductor cooling – requires less cooling water than thyristors
▪▪ 24/7 Hotline
▪▪ Guaranteed replacement parts supply thanks to modern IGBT power semiconductor
▪▪ Quick and simple operation even in its basic version
▪▪ In-house converter manufacture guarantees further development on our own premises
Converter-Show Software for
maintenance can be supplied
optionally
▪▪ Display of all relevant operational data
▪▪ Reading out and filing of error memory
▪▪ Graphic display of actual value memory
The software comprises training
courses.