Download wide voltage pulse width DC motor speed control, speed control board

The HX-PWM series AC90V-AC260V), (wide voltage pulse width DC motor speed control,
speed control board
Manual
I. Introduction:
The latest product of the HX-PWM (extra-wide voltage AC90V-AC260V) enter low-power
DC motor speed controller. The governor uses pulse width modulation technology, selection
of today's advanced switching device design, small size, no noise, high efficiency work, and
advanced short circuit protection, and the armature output voltage and high stability, its power
The hinge voltage continuously adjustable from zero to the rated value, which makes the
motor speed control is very convenient. Due to the high operating frequency, the governor in
order to ensure stable operation of the motor at low speeds (ie without creeping phenomenon)
is an alternative to the ideal replacement for thyristor speed power. Widely used in wires,
cables, light industry, textile, paper, chemicals, printing and dyeing, metallurgy, rubber, wire
drawing, extrusion machinery, medical equipment, food production, printing and packaging a
variety of industries, small DC motor armature supply DC motor to achieve constant torque
stepless speed regulation.
Second, the detailed technical parameters:
Input voltage: AC90-AC260V 50/60Hz wide voltage (voltage global adaptation, is more
suitable for harsh grid voltage fluctuations)
2, the output current: 4A
3, fit the motor power: 50W ~ 300W
4, the armature output voltage: DC0 ~ 110V stepless
5, excitation output voltage: 0.9 times the input voltage current 1A
6, Dimensions: length 130mm × width 98mm × height 38mm
7, Connection: terminal type (conveniently)
Third, the work environment:
1, ambient air temperature: -10 ~ 40 ° C
2, the air relative humidity below 85%, well-ventilated
3, installed in a well-ventilated, dramatic impact, no vibration, no explosion hazard media and
the occasion of the conductive metal powder
Fourth, the product features:
1, using pulse width technology more stable speed, low-speed efforts
With overcurrent protection cut-off device is more reliable performance
3, with a soft start device to eliminate the motor starting current is too large
4, with flexible multi-function interface
V. Notes:
Governor input power is turned off within one minute ban hand to touch the terminals, high
voltage capacitor to prevent electric shock!
2, two lines of permanent magnet DC motor, the two lead directly connected to the armature.
Prohibit access excitation
VI wiring diagram: Figure on the standard switch, connected to the motor rotation, disconnect
stop.