Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
PROJECT NUMBER ______________ PROJECT NAME__________________ DATE ___________ PROJECT LOCATION _____________ TECHNICAL SPECIFICATIONS SECTION 27 16 00 – COMMUNICATIONS DEVICES and ADAPTORS SECTION 27 16 16 - COMMUNICATIONS ADAPTORS and TRANSCEIVERS TYPE VR148COAX ETHERNET EXTENDER SYSTEM Part 1 GENERAL 1.01 All equipment to be supplied under this specification shall be new and the current model of a standard product of an OEM of record. An OEM of record shall be defined a a company whose main occupation is the manufacture for sale of the equipment supplied and which: A. Maintains a factory production line for the item submitted. B. Maintains a stock of replacement parts for the item submitted.. C. Maintains engineering drawings, specifications, and operating manuals for the items submitted. D. Has published and distributed descriptive literature and equipment specifications on the items of equipment submitted. 1.02 Specifications of equipment as set forth herein are salient and minimum requirements, unless otherwise stated and shall not be construed as limiting the overall quality, quantity or performance characteristics of items furnished. 1.03 Systems and components shall have been thoroughly tested and proven in actual use. 1.04 All systems and components shall be provided with the availability of a toll free (U.S. and Canada) technical support number from the manufacturer. The number shall provide technical assistance for either the dealer/installer or the end user at no charge Part 2 SPECIFICATIONS 2.01 The Ethernet Extender System (EES), shall be a NITEK Model VR148COAX or approved equivalent, and shall be capable of transmitting IP Ethernet network data over common standard coaxial cables for distances of up to 2,500 feet (750 meters) on a 10/100 network. 2.02 The EES shall consist of a Transmitter unit and a Receiver unit, each of which shall be in a self-contained steel case 3.25 inches wide x 4.75 inches long x 1.25 inches high. The Front Panel of each shall provide an Ethernet connector for connection to the Ethernet and a BNC type female coaxial connector for connection to the UTP extender cable. The Rear Panel of each shall provide a slotted screw grounding lug, a two-wire push terminal connector for the external power supply input and a power connector reserved for interface with the NITEK Model RK124 Rack System. 2.03 The Transmitter unit shall have circuitry capable of providing Power over Ethernet (PoE) to one compatible connected device; i.e. an IP camera. Power to the Transmitter and Receiver units shall be provided by means of an external, self-contained 24VAC or 24VDC, 24 Watt power transformer. The Transmitter unit shall provide PoE to the RJ45 network connector on the Front Panel. 1 PROJECT NUMBER ______________ PROJECT NAME__________________ DATE ___________ PROJECT LOCATION _____________ TECHNICAL SPECIFICATIONS SECTION 27 16 00 – COMMUNICATIONS DEVICES and ADAPTORS SECTION 27 16 16 - COMMUNICATIONS ADAPTORS and TRANSCEIVERS TYPE VR148COAX ETHERNET EXTENDER SYSTEM PART 2 – SPECIFICATIONS (continued) 2.04 The EES shall operate in a manner that is completely transparent to the Network. The System shall require no IP or MAC addresses. The system shall operate as follows: A . The coaxial cable shall be connected between the BNC connectors on the Transmitter and Receiver. B. The patch cable from the Receiver shall connect to the head-end Network equipment and the patch cable from the Transmitter shall connect to the connected device. C. With 24V power applied to both the Transmitter and Receiver, the Transmitter shall provide power for its connected device. D. The Receiver shall immediately connect to the Transmitter and shall begin operating as a full-duplex 100BaseT Ethernet conduit. 2.05 The EES shall support any standard Network device, shall support mega-pixel cameras and multi-camera installations. 2.06 Both the Transmitter and Receiver units shall have LED indicators on the Front panels to indicate 1) Ethernet Network connectivity/status; 2) Ethernet Speed; 3) Twisted Pair Link status. 2.07 Ethernet and coax inputs on both the Transmitter and Receiver units shall be protected with dual stage surge protection systems. 2