Download INTELLIGENT FIRE DETECTOR WITH AUTOMATIC WATER

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Mains electricity wikipedia , lookup

Rectifier wikipedia , lookup

Switched-mode power supply wikipedia , lookup

Opto-isolator wikipedia , lookup

Fire-control system wikipedia , lookup

Immunity-aware programming wikipedia , lookup

Transcript
INTELLIGENT FIRE DETECTOR WITH AUTOMATIC WATER
SPRINKLER SYSTEM TO AVOID FIRE ACCIDENTS
AIM:
The aim of this project is to continuously check the presence of fire in the industries.
PURPOSE:
Every system is automated in order to face new challenges in the present day
situation. Automated systems have less manual operations, so that the flexibility, reliabilities
are high and accurate. Hence every field prefers automated control systems. Especially in the
field of electronics automated systems are doing better performance.
BLOCK DIAGRAM:
LCD DISPLAY
POWER
SUPPLY
SMOKE
SENSOR
(16 X 2 LINES)
MICRO
CONTROLLER
RELAY
WATER
SPRINKLER
(AT89S52)
BUZZER
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
1
POWER SUPPLY:
Step Down
Bridge
Filter
Transformer
Rectifier
Circuit
Regulator
section
DESCRIPTION:
The project title “INTELLIGENT FIRE DETECTOR WITH AUTOMATIC WATER
SPRINKLER SYSTEM TO AVOID FIRE ACCIDENTS “indicates that the system
continuously checks for the presence of fire in industries. This is done with the help of a
smoke sensor. This project is designed around a microcontroller. The Micro controller plays a
major role in the project for controlling purpose. Whenever the fire is detected by the sensor
is indicated to microcontroller. Then the microcontroller takes the control action by switching
on or off the water sprinkler. By making use of these kinds of projects we can provide the
security in industries.
This project uses regulated 5V, 500MA power supply, 7805 three terminal voltage
regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the
ac output of secondary of 230/12V step down transformer.
HARDWARE COMPONENTS:
1) Microcontroller (AT89S52).
2) LCD Display (16*2).
3) Relay.
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
2
4) Water Sprinkler.
5) Fire Sensor/Smoke Sensor.
SOFTWARE:
1) Kiel U vision
2) Express PCB
3) ISP
APPLICATIONS:
1) Used in Industries
2) Used in Shopping Malls
RESULT:
Hence this project is to implement the security for the shopping malls, industries
and etc. from the fire.
Head office: 2nd floor, Solitaire plaza, beside Image Hospital, Ameerpet, Hyderabad
www.kresttechnology.com, E-Mail : [email protected] , Ph: 9885112363 / 040 44433434
3