Download 3-1-h-geom-city

Honors Geometry
Names
Section 3-1 Summative Assignment
Directions:
1. With your partner, design a map for a city or town. Use a ruler to draw the streets.
2. Your map must be designed so that you can label one of each type of angle pair: vertical angles,
supplementary angles (must be adjacent), congruent alternate interior angles, congruent alternate
exterior angles, congruent corresponding angles, supplementary same-side interior angles, and
supplementary same-side exterior angles. Include only one intersection in which the streets
are perpendicular.
3. Name your city or town and all of its streets. Include at least 5 landmarks such as a city or town
hall, a library, a park, a school, a shopping center, etc.
4. Use a protractor to measure your angle pairs. Label each angle with its measure to show
whether each pair is congruent or supplementary. Include a key that clearly indicates each angle
pair.
5. Use the table below to evaluate your work before turning it in.
Requirement
Points
Possible
Vertical angles labeled and measured correctly
2
Adjacent supplementary angles labeled and measured
correctly
Alternate interior angles labeled and measured correctly
2
Alternate exterior angles labeled and measured correctly
2
Corresponding angles labeled and measured correctly
2
Same-side interior angles labeled and measured correctly
2
Same-side exterior angles labeled and measured correctly
2
Streets are perpendicular at only one intersection
2
Streets and 5 landmarks are labeled
2
Neatness/Spelling – ruler and protractor were used – no
spelling errors
2
Total
2
20
Points you
think you
earned
Points
Awarded