Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Download WKS19 www.wineyard.in MINIATURE THERMAL POWER PLANT
Document related concepts
Transcript
WKS19 www.wineyard.in MINIATURE THERMAL POWER PLANT USING TEP TRANSDUCER FOR DOMESTIC AND INDUSTRIAL APPLICATIONS. TECHNICAL SPECIFICATION Title of the project : miniature thermal power plant using TEP transducer for domestic and industrial applications Domain : Embedded Systems, Software : Embedded C, Keil, PROLOAD Microcontroller : AT89S52 controller. Power Supply : +05V, 2MA. Crystal : 11.0592MHz Display : LCD(16*2) ADC : 1 Developed By : M/S Wine Yard Technologies Phone : 040-6464 6363, www.WineYard.in WKS19 www.wineyard.in Man has needed and used energy at an increasing rate for his sustenance and wellbeing ever since he came on the earth a few million years ago. Due to this a lot of energy resources have been exhausted and wasted. Proposal for the utilization of waste energy of foot power with human locomotion is very much relevant and important for highly populated countries like India and China where the roads, railway stations, bus stands, temples, etc. are all over crowded and millions of people move around the clock. This whole human/ bio-energy being wasted if can be made possible for utilization it will be great invention and crowd energy farms will be very useful energy sources in crowded countries In this project we are generating electrical power as non-conventional method by heat energy .Non-conventional energy systems very essential at this time to our nation. Non- conventional energy using is converting mechanical energy into the electrical energy. Here in this project a mechanical arrangement is made. Use of embedded technology makes this system efficient and reliable. Micro controller (AT89S52) allows dynamic and faster control. Liquid crystal display (LCD) makes the system user-friendly. AT89S52 micro controller is the heart of the circuit as it controls all the functions. In this project the conversion of the Heat energy in to electrical energy. By using this energy fan will operates and the energy is stored in a battery. The control mechanism carries the A.C ripples neutralizer, unidirectional current controller and 12V, from this battery supply will pass to the inverter and it is used to drive AC/DC loads. The battery is connected to the inverter. This inverter is used to convert the 12 Volt D.C to the 230 Volt A.C. This 230 Volt A.C voltage is used to activate the loads. We are using conventional battery charging unit also for giving supply to the circuitry. Here we are using 16X2 LCD to display the voltage values of the battery using AT89S52. In this project we are using TEP Transducer .Transducer is a device which converts one form of energy in to another form of energy. which includes electrical ,mechanical ,light andheat energy also .while the term transducer commonly implies the use of sensors/detector any device which converts energy considered as Transducer. WKS19 www.wineyard.in BLOCK DIAGRAM: DC LOAD FAN TEP TRANSDUCER POLARITY CONVERTER 12V,1.3AH Battery rechargeable Voltage sampler Heat source ADC Inverter Ac load lamp Contrast control 16*2 LCD Manual Reset MCU Power-on Reset Crystal POWER SUPPLY :
