Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Prof. Dhananjay Kulkarni List of Recent Publications 1. Kulkarni D. M. and Chaudhari Vikas. (2012). ‘Failure Analysis and Prevention’ a Course for Undergraduates. Bulletin of Marine Science and Technology. Vol. 7, pp. 27-29. Experimental Crack Growth Behaviour in Extra Deep Drawn Steel 2. Chaudhari Vikas, Kulkarni D. M. and Ravi Prakash (2012). Characterization of Sheets. International Journal of Microstructure and Materials Properties. (Under the minor revision). 3. Chaudhari Vikas, D. M. Kulkarni Ravi Prakash, V. P. Agrawal (2011). Computer Aided Evaluation, Failure analysis and Optimum Selection of Product System Parameters. International Review of Mechanical Engineering (IREME). (Under the revision). 3-Dimensional Finite Element Analysis of Fracture Behaviour in General Yielding Fracture Mechanics. International Journal of Mechanical Engineering. 4. Chaudhari Vikas Kulkarni D. M. and Ravi Prakash (2010). Strojnicky Casopis, Vol. 3. pp: 131-148. 5. Chaudhari Vikas, Kulkarni D. M. and Ravi Prakash (2010). Determination of Critical CTOD using Crack Flank Opening Angle Method in General Yield Regime. Fatigue and Fracture of Engineering Materials. WILEY, Vol. 34 . pp: 260-269. Effect of Notch Radius on Fracture Toughness in General Yielding Fracture Mechanics. 6. Chaudhari Vikas, Kulkarni D. M. and Ravi Prakash (2009). Fatigue and Fracture of Engineering Materials. 32, pp. 975- 986. 7. Kulkarni D. M., Chaudhari Vikas, Ravi Prakash and Kumar A.N. (2008). Effect of Thickness on Fracture Criterion in General Yielding Fracture Mechanics. International Journal of Fracture. 151. pp. 274-275. 8. Kulkarni D. M. (2008). Aluminum Alloys an Alternative Material in the Shipbuilding 9.Industry, a Technical Review. Bulletin of Marine Science and Technology. Vol. 4, pp. 1-5. Conference Publications (National and International) 10. Kulkarni Anant C., Kulkarni D. M. (2011). Miniature Representation of hip joint using image processing and cad software” International conference on Control Instrumentation and Systems Conference (CISCON-11), 3–6 Nov-2011 at Manipal University. 217-219. Effect of Thickness on Fracture Criterion in General Yielding Fracture Mechanics. 11. Kulkarni D. M. Ravi Prakash and Kumar A.N. (2008). Proceedings of 8th International Conference on Fundamentals of Fracture. Hong Kong, 03-08 January 2008, pp. 274-278. Book Publication: 12. Kulkarni D. M. Kulkarni Anant C. and Kurchudkar Mahen dra. (2012). Axisymmetric contact stress analysis for artificial hip joint. Accepted for a book “Bio and Medical Tribology” Nova Science Publishers, Inc. NY. *Chapter in Book+. 13. Kulkarni Graphics D.M. with New Delhi, 2010. Rastogi Auto A.P. and Sarkar A.K., Engineering CAD. (Revised Edition), Prentice Hall India,