Download High Current I/O Module for Integrated Boating Control

High Current I/O Module for
Integrated Boating Control
• For 12 & 24 Volt systems
• 12 High Current
Switching Outputs
• 12 Digital and
8 Analog Inputs
• Integrated Circuit
Protection & Diagnostics
• CAN J1939
Communications
Looking for a simpler way to integrate multiple loads,
switches and sensors into your display system?
Combined with our full range of HelmView™ displays,
the Power Distribution Module (PDM) allows users
to display and control trim tabs, ballast pumps,
lighting, blowers and more. Users can integrate up to
20 additional inputs for a more complete system view.
The PDM is designed for use in 12 -24V systems
and supports CAN J1939 communications,
which allows users to remotely monitor and configure
inputs and outputs. In addition, the PDM features
solid-state circuit protection which eliminates the need
for fuses. The PDM provides current and EMF feedback
for actuator protection and accuracy.
See the full specs on the back of this sheet for
a full overview of the PDM technical features.
POWER
DISTRIBUTION MODULE
POWER
DISTRIBUTION MODULE
STANDARD DIMENSIONS
FRONT VIEW
TECHNICAL SPECIFICATIONS
·
System Voltages:
12V & 24V. Features reverse voltage protection.
·
Operating Temperature:
-40°C to 85°C (-40°F to 185°F).
·
Digital Inputs:
12 digital inputs can monitor switch inputs in both
ground and Vbat condition, providing up to
24 separate switch inputs.
·
Analog Inputs:
8 analog inputs standard, 0 – 5V.
·
Digital Switching Outputs*:
12 High Current Outputs (H-Bridge Configurable).
*Regulated output 5V @ 70mA available for providing
sensor excitation.
·
Output Current Capacity**:
Up to 15 Amps steady-state per output (channel).
Either single ended or H-Bridge.
**2 of the 12 digital switching outputs have a 30 Amp
capacity. Total steady-state current allowed for all outputs
simultaneously: 70 Amps.
SIDE VIEW
·
Communication Ports: CAN J1939.
·
Potting: Internally potted and sealed. Integrated circuit
protection.
·
Connectors: Deutsch, sealed.
·
Dimensions: 6.5 in (H) x 5.5 in (W) x 2 in (D).
BACK VIEW
FW MURPHY
P.O. Box 470248
Tulsa, Oklahoma 74147 USA
+1 918 317 4100 Fax: +1 918 317 4266
E-mail: [email protected]
INDUSTRIAL PANEL DIVISION
Fax: +1 918 317 4124
E-mail: [email protected]
MURPHY POWER IGNITION
Web site: www.murphy-pi.com
CONTROL SYSTEMS & SERVICES DIVISION
P.O. Box 1819
Rosenberg, Texas 77471 USA
Phone: +1 281 633 4500 Fax: +1 281 633 4588
E-mail: [email protected]
FRANK W. MURPHY, LTD
Church Rd Laverstock
Salisbury SP1 1QZ UK
Phone: +44 1722 410055 Fax: +44 1722 410088
E-mail: [email protected]
Web site: www.fwmurphy.co.uk
COMPUTRONIC CONTROLS, LTD
41 - 43 Railway Terrace Nechells
Birmingham B7 5NG UK
www.computroniccontrols.com
FW MURPHY INSTRUMENTS (HANGZHOU) CO. LTD
77 23rd Street
Hangzhou Economic & Technological Development Area
Hangzhou, Zhejiang 310018 China
Phone: +86 571 8788 6060 Fax: +86 571 8684 8878
E-mail: [email protected]
www.fwmurphy.com
Printed in the USA
11100890
10/2011