Download ProfiTrace 2 – Comprehensive PROFIBUS Analyzer Introduction P

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Mains electricity wikipedia , lookup

Telecommunications engineering wikipedia , lookup

Topology (electrical circuits) wikipedia , lookup

Opto-isolator wikipedia , lookup

Music technology (electronic and digital) wikipedia , lookup

Emulator wikipedia , lookup

Oscilloscope types wikipedia , lookup

Immunity-aware programming wikipedia , lookup

Transcript
ProfiTrace 2 – Comprehensive PROFIBUS
Analyzer
Introduction
Procentec ProfiTrace 2 is the most powerful analyzer for
PROFIBUS networks. The very latest generation in bus
monitoring technology, combining all primary tools :-
Analyzer, Oscilloscope, Bar graph,
Topology Scan and DP-V0/V1 Master.
Technicians can check and troubleshoot a complete
PROFIBUS network with 1 software package and only 1
piece of hardware - an enormous reduction in test equipment
weight, cost and required knowledge over previous kit.
An advanced PROFIBUS to USB hardware adapter,
ProfiCore Ultra, is used to capture bus signals running at up to 12 Mbps and is equipped with
high speed digital oscilloscope circuits for display of waveform details on an attached computer.
A ProfiTrace 2 software set on your computer, connected to a PROFIBUS network through a
ProfiCore Ultra adapter, provides an essential tool for maintenance, commissioning and
troubleshooting as well as product development. The classical failures such as noise, reflections,
voltage drops, termination problems, double addresses, wire breaks and configuration faults are
easily identified. Random errors such as overshoots, error telegrams, repeats and diagnostic
messages can also be captured and logged. The results can also be exported to detailed
reports which are accepted by the industry. Predictive maintenance and asset management are
now really possible!
This outstanding tool that fits in your pocket will boost the limits and capabilities of all PROFIBUS
service, maintenance and engineering technicians.
ProfiTrace 2 software and an essential ProfiCore Ultra
adapter is normally supplied in one of two Troubleshooting
Toolkit sets. These include the useful Tap Connector lead,
USB leads, software CD and User Handbook, all in a robust
plastic carrying case, as in photo. All components may be
purchased individually, if required. See below for further
details, including software licence options.
Product features
Analyzer with powerful statistics
Enhanced version of ProfiTrace 1: Live list display and message detail log showing Repeats,
Fall-outs, Corrupted messages, Diagnostics, Cycle time, etc.
High speed digital oscilloscope
Differential voltage, A-line, B-line, Noise, Overshoots, Reflections, Triggers
Bar graphs
Available from UK Distributor : Hi-Port Telecom Tel : 023 92 552855
Feb 11
Page 1
Average, Min. and Max. values of the bus signals from all connected devices
Topology scan
Automatic generation of network diagram showing cable lengths
Reporting
Automatic generation of detailed reports that are accepted by the industry
DP-V0/V1 master
ProfiCaptain has been completely integrated with even more features
ProfiCore Ultra USB interface
Useable on PC platforms, no power supply required and elimination of spur lines
DP and PA
The PA Probe Ultra allows direct measurements on PA segments
9,6 kbps to 12 Mbps.
Works on Windows 7, Windows XP and Vista platforms
Analyzer features
Intelligent real-time Live List
• Colour coded indication of detected device status
• Powerful statistical listings for most errors : repeats, station
lost, etc.
• Advice & warnings : Ident number mismatch, Watchdog not
set, Illegal configuration
• Last diagnostic, parameter, configuration and data-exchange
message details
• GSD file management for product and diagnostic
identification
Intelligent message sampler
• Visualization of FDL, DP, DP-V1, DP-V2, PA and I&M
messages
• Messages can be filtered and stored
• Data interpretation of bytes, words, floating points, etc.
• Error detection
• Bookmarks
ScopeWare features
• Time scale: 50 ns to 500 ms.
• Voltage scale: 0.5 to 5 V per Div.
• Cursor measurement lines (voltage and time)
• Differential (B-A) and single ended (A and/or B line)
measurements
• Free running or trigger per device
• Trigger features: start of response or request message
• Dual trace format for PROFIBUS PA signal and power
Available from UK Distributor : Hi-Port Telecom Tel : 023 92 552855
Feb 11
Page 2
Bargraph features
• Shows driver voltages for all connected devices
• Average, Minimum and Maximum signal levels per device
• Colour indication of the signal quality
• Continuously updated
Master features
• Complete integration of ProfiCaptain
• Connect as Secondary Master or as the only Master
• I/O testing with automatic patterns to slaves
• Automatic detection of existing bus parameters
• Brand new concept of 'stealing' slaves
• Class 2 functions in a Class 1 framework
• No shutdowns when updating the configuration
• Deactivating slaves in the configuration
Topology Scan
• Automatic assessment and drawing of
network topology diagrams
• No shutdown required
• No disturbance in the cycle time
• Works on 500 kbps and 1.5 Mbps networks
• Used on passive networks in conjunction
with ProfiCaptain
ProfiCore Ultra Features
PROFIBUS to USB Adapter
• PROFIBUS maximum baudrate 12 Mbps.
• Galvanic isolated PROFIBUS Interface.
• Latest RS 485 technology.
• Only minimal network loading or disturbance.
Oscilloscope
• Frequency: 192 MHz
• Bandwith: 100 MHz
• Differential measurement: -9 to +9 V
• Single ended: -4.5 to +8 V
• Dual trace format for PROFIBUS PA signal and power
Other Aspects
• High speed USB 2.0 interface
• External oscilloscope trigger port.
•. External power supply possible if required
Available from UK Distributor : Hi-Port Telecom Tel : 023 92 552855
Feb 11
Page 3
Products
Order code Description
30020
• ProfiCore Ultra, with USB cable
• ProfiTrace 2 software (incl. Report)
(no Oscilloscope, Topology or Bargraph
functions)
37021
• ProfiCore Ultra, with USB cable
• ProfiTrace 2 software (incl. Report)
ProfiTrace 2
• ScopeWare software (incl. Bargraph)
• Tap Connector 2
• Topology Scan Software
• Blue carrying case
Troubleshooting
Toolkit Ultra Plus
38022
Troubleshooting
Toolkit Ultra Pro Plus
OPC Server s/w
101-00231B
CommDTM driver
101-00241A
• ProfiCore Ultra, with USB cable
• ProfiTrace 2 software (incl. Report)
• ScopeWare software (incl. Bargraph)
• Tap Connector 2
• Topology Scan Software
• Blue carrying case
• PA Probe Ultra + NEW OPC Server s/w
• ProfiCaptain 2 software
• Upgrade current software licence to add
extra capabilities
• Parameterization of DP and PA devices
Available from UK Distributor : Hi-Port Telecom Tel : 023 92 552855
Feb 11
Page 4