Download proof by performance 100 Series Dual Arch

proof by performance
100 Series Dual Arch Adhesive Application System
The Profero Dual Arch Adhesive Application System
allows two separate mediums to be laminated
together prior to entry into the corroding rolls.
This provides an alternative board/grade
combination from your present Corrugator. R.S.C.
containers produced with dual arch equipment can
provide as much as three times the strength of
standard single fluted cases.
The increase of concora values of up to 100% raises
the flat crush figures by a similar percentage.
Strength and rigidity normally associated with
middle-weight, double wall board are achieved
using only four ply rather than five ply of paper.
The reduced material in dual arch corrugated board
provides a 10% increase in pallet stack heights and
subsequent transport capacity. Lower unit costs
per box and superior compression values over
standard light double wall boxed of similar
dimensions are achieved.
The Profero Dual Arch Adhesive Application System
applies adhesive to the underside of the upper
paper web in the direction of paper travel by means
of an annular grooved roll. The adhesive is metered
by a matching annular grooved roll, which can be
adjusted during operation to suit the running
conditions of the paper and type of adhesive used.
Headquarters:
Profero Systems
P.O. Box 950
Dallas, NC 28034
704-923-0990
1-888-468-3734
Latin America:
Alhu International Inc.
Dax Hughes
7370 Remcon Circle
El Paso, TX 79912
915-845-2548
Australia/Asia:
Brently Engineering
Don Daisley
P.O. Box 79
Hunters Hill, NSW 2110
Australia
9427-1177
Canada:
Legacy Marketing
Tom Banks
382 Bayshore Boulevard
Huntsville, Ontario
P1H1Z1 Canada
705-787-0156
The system is complete with pumps and
alternative adhesive usage pipe-work interchange
circuitry. Adjustable roll scrapers are fitted to
ensure that adhesive is maintained within the
confines of the unit and not transferred to the
corrugating rolls.
The Profero Dual Arch Adhesive Application
System is designed so that it can be installed on
existing equipment without the need for
expensive modifications.
Linked into the single facer stop circuit is an
adhesive applicator, roll idle facility, electropneumatic paper web lift mechanism, and we
break out detection equipment.
Argentina:
Geoce
Carlos Mancuso
Asturias 5854
(1766) La Tablada
Provinicia de Buenos Aires,
Argentina
4699-6200
Brazil: Perpak
Francisco Silva
Rua Candido de Abreu
469 CJ 1802/1803
Curitiba Parana CEP
80530-000 Brazil
352-6166
✹✻✸✯✮✻✸✼❂✼✽✮✶✼