Download Capacity Planning

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts
no text concepts found
Transcript
Capacity Planning
ABI301
Introduction
• Capacity refers to an upper limit or ceiling on the load that
an operating unit can handle.
• The operating unit might be a plant, department, machine,
store, or worker.
• The importance of capacity :
– It enables managers to quantify production capability in terms
of inputs or outputs,
– makes other decisions or plans related to those quantities.
•
•
•
•
The basic questions in capacity planning are the following:
1. What kind of capacity is needed?
2. How much is needed?
3. When is it needed?
Importance of Capacity Decisions
1.
2.
3.
4.
5.
6.
Capacity decisions have a real impact on the ability of the
organization to meet future demands for products and services;
capacity essentially limits the rate of output possible.
Capacity decisions affect operating costs. Ideally, capacity and
demand requirements will be matched, which will tend to
minimize operating costs.
Capacity is usually a major determinant of initial cost. Typically,
the greater the capacity of a productive unit, the greater its cost.
Capacity decisions often involve long-term commitment of
resources and the fact that, once they are implemented, it may be
difficult or impossible to modify those decisions without incurring
major costs.
Capacity decisions can affect competitiveness.
Capacity affects the ease of management.
Defining and Measuring Capacity
• It can be refined into three useful definitions of
capacity:
1. Design capacity: the maximum output that can
possibly be attained.
2. Effective capacity: the maximum possible
output given a product mix, scheduling
difficulties, machine maintenance, quality
factors, and so on.
3. Actual Capacity: The actual production at
specific time.
Defining and Measuring Capacity
• These different measures of capacity are
useful in defining two measures of system
effectiveness: efficiency and utilization.
1. Efficiency is the ratio of actual output to
effective capacity.
2. Utilization is the ratio of actual output to
design capacity.
Example
Determinants of Effective Capacity
• Many decisions about system design have an
impact on capacity.
• The main factors relate to the following:
1.
2.
3.
4.
5.
6.
Facilities
Products or services
Processes
Human considerations
Operations
External forces
Developing Capacity Alternatives
• The alternative things that can be done to
enhance capacity management:
1. Design flexibility into systems.
2. Differentiate between new and mature products or
services.
3. Take a “big picture” approach to capacity changes.
4. Prepare to deal with capacity “chunks.”
5. Attempt to smooth out capacity requirements.
6. Identify the optimal operating level.
COST–VOLUME ANALYSIS
• Cost–volume analysis focuses on relationships
between cost, revenue, and volume of output.
• The purpose of cost–volume analysis is to
estimate the income of an organization under
different operating conditions.
• One of the famous mathematical modeling
using to identify capacity is break-even point
(BEP) the volume of output at which total cost
and total revenue are equal.
COST–VOLUME (BEP) ASSUMPTIONS
• Cost–volume analysis can be a valuable tool for
comparing capacity alternatives if certain
assumptions are satisfied:
1. One product is involved.
2. Everything produced can be sold.
3. The variable cost per unit is the same regardless of
the volume.
4. Fixed costs do not change with volume changes, or
they are step changes.
5. The revenue per unit is the same regardless of
volume.
6. Revenue per unit exceeds variable cost per unit.
Cost-Volume Equations
Problem(1)
• The efficiency of a productive unit is 60%.
The unit produces an average of 20 forklift
trucks per day. Determine the effective
capacity of the unit.
Problem(2)
• The utilization of a machine is 50%. The
machine has a design capacity of 70 units per
hour and an effective capacity of 60 units per
hour. Find the efficiency of the machine.
Problem(2) - Continue