Survey
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
[12페이지 카탈로그] Page 1 Discover the Difference SOLAR MICROINVERTER _300w (그림) Company focusing on environment and human E&H Co., Ltd. Page 2 i-Sun microinverter is the history and know-how of 40 year-long E&H Co., Ltd. in building the photovoltaic power plants . 300W class 15-year warranty Easy Long Life Time Safe New & Renewable Energy -Year established: 1973 (incorporated in 1998) -Line of business: Manufacture and construction of the product related with new & renewable energy -Type of company: Venture enterprise; Inno-biz company; ISO certified and specialized in new & renewable energy -Main products: photovoltaic system, solar PV module, solar PV microinverter, LED lights Page 3 Photovoltaic microinverter is a dispersion type that may directly produce AC power by panel units by integrating ultra-small type inverter in each solar PV panel in the photovoltaic system. This is the dispersion type system contrary to the type that converts DC power produced in solar PV panel array into AC through the inverter installed separately, which is the existing central inverter occupying the current inverter market. Existing central inverter requires the place for a separate DC cable and inverter to be installed as panel and inverter are independently installed, and the expense of installation should be increased inevitably as a separate facility must be installed to minimize the exposure to the external environment as the case may be. In addition, it requires connection of several panels in DC type, and therefore results in critical loss in power generation efficiency owing to ‘Christmas light effect’ that may influence on the entire panel at the occurrence of any error in the specific module. In addition, it may cause the occurrence of miss match following multi-step power transmission. Furthermore, it has disadvantages such as the problem that it cannot be grasped immediately when there appear any trouble in the specific panel, the short life problem as the inverter operating area is operated for 24 hours a day regardless of sunshine amount. E&H came to develop i-Sun brand microinverter in new concept that may cope with such disadvantages of central inverter based on the past 40 years history and knowhow in photovoltaic power plants construction and put it into mass production. Microinverter is a new product that may replace the disadvantages of the existing central inverter. This method mounts one inverter per solar PV module enabling free addition of module, and provides improved power generation efficiency up to 15% compared with the central inverter through realization of MPPT of individual module, and furthermore provides long life for 25 years or longer through low voltage technology. Page 4~5 (상단) Page 4 Why E&H i-Sun Microinverter Currently more than 90% of photovoltaic power plants are designed and installed with central inverter system. These systems change DC power obtained by solar PV module arrays into AC through a single inverter, which disables to trace MPP value of each module resulting in loss of power caused by low voltage following at the occurrence of voltage difference by arrays. On the other hand, i-Sun Microinverter supplied by E&H is designed and installed with a new concept dispersion type inverter system of photovoltaic power plant. With ultra-small lightweight individual inverter mounted on the individual module, it generates AC by module units increasing production of power through prevention of miss match loss and Christmas light effect. Page 5 (그림) 우측 상단 300W class ultra micro power generator ‘i-Sun Microinverter It converts low voltage of DC 22~40V produced in each PV module into AC220V. As the 300W class inverter designed by adopting the technology that realizes minimization of power conversion loss and maximization of power production, it enables isolated operation of 300w class solar cell module. (좌측 하단) ‘i-Sun Station It enables to monitor operation status and error status of photovoltaic system with i-Sun Microinverter mounted by modules on a real-time basis and transfers such data to the central server. ‘i-Sun Monitoring, as the operation program that realizes remote monitoring through single or web in the place where photovoltaic system is built, is a comprehensive system that manages data collected through i-Sun Station. Page 4~5 공통 하단 (Discover the Difference) Central inverter is built with DC cable up to the inverter resulting in the loss of power on the cable, and therefore it requires securing the space for inverter to be installed separately. In addition, it has inconvenience that separate equipment should be used and the power loss may appear caused by miss match following complexity of the system. However, i-Sun Microinverter may remove all these advantages and obtain the effects of saving the installation expense and increasing the power production in addition. [Improvement of amount of generation through removal of Christmas light] ‘i-Sun Microinverter can overcome Christmas light effect that is the most critical disadvantage of existing central inverter. In case of central type inverter, it greatly drops generation efficiency as simultaneously the generation efficiency of ambient panel decreases like the continuous flashing of the lamps near the Christmas tree when the obstacles (shade, snow, leaves, etc.) cover the panel. However, microinverter performs individual generation by panels, and therefore the normal panels except the area covered by obstacles continue the generation at the maximum efficiency, resulting in the effect of improving the amount of generation up to 15% compared with the existing central type. [Safety/duration improvement and long life] ‘i-Sun Microinverter is wrapped with rigid silicone with IP65 grade in terms of duration, which may perform generation under the extreme situation such as snow, rain, heat wave, sand storm, etc. In addition, in case of existing central inverter, it is connected from a single inverter to several solar PV panels resulting in the flow of substantial amount of high voltage. This may cause vulnerability to fire and reduction of life as well. However, microinverter by individual panels is operated on the low voltage interrupting the risk of fire and providing long life for 25 years or longer. [Overcoming the restriction of installation] It allows free expansion of the panels on a variety of spaces. In case of existing central inverter, it requires composition of array satisfied to electrical specification of inverter and therefore restricts free expansion of installation capacity. Especially, in case of adopting microinverter to house with narrow space, spare space of apartment or veranda, etc., it may enable the generation in a variety of types. [Maintainability] ‘i-Sun Microinverter may deliver 24-hour generation status by individual panels to the users as it has the individual panel being mounted. Existing central inverter did not allow the user to immediately detect the location and problem when there occurred the failure of specific panel as it is connected from a single inverter to multiple panels. However, microinverter enables prompt maintenance and action through individual panel real-time monitoring system. Especially in case of large capacity commercial solar PV power plant, it may obtain the effect of minimizing A/S lead time following the occurrence of trouble in the panel and maximizing the amount of generation. [Advantage in BIPV installation] Especially when there occurs error in the BIPV power generation facility in building slope mounting type or wall mounting type, the existing central inverter requires checking such error after removing several panels connected with the inverter. However ‘i-Sun Microinverter is relatively advantageous in a/s service as it requires removing the applicable panel only. [15 Years Warranty] Page 6 ‘i-Sun Microinverter It converts low voltage of DC 22~40V produced in each PV module into AC220V As the 300W class inverter designed by adopting the technology that realizes minimization of power conversion loss and maximization of power production, it enables isolated operation of 300w class solar cell module. Patent “First technology in the world” AC module integrated type inverter BIPV AC module inverter (duct type) -Certified as new & renewable energy facility (PV-GTI-1-0089) -Registered the patent for the high frequency resonant power conversion system through modulation of pulse width in high frequency phase shift type on the 26th July 2011 -Registered the patent for the building integrated type photovoltaic system equipped with microinverter on the 1st September 2011 -Registered the patent for AC type solar PV module improving the output performance of photovoltaic system on the 7th October 2011 Feature [Simple installation] -Simply mounted on the PV module frame -Using solar PV connector interrupting the connection between module and inverter -No need to have separate DC wiring work and DC connection box -Can be installed on narrow space such as parking lot, pagora, etc. [Easiness in capacity expansion] -Allowing the expansion of free number of modules in a variety of installation spaces [Safety/efficiency] - MPPT - Using most of the power produced by the module with the amount of generation -The module that undertook error doesn’t influence on the ambient module maximizing the power production -Prevents loss of power by DC line through AC power production by individual module units -Prevents electric shock risk by using low AC power rather than high-voltage DC [Allowing monitoring by individual module units] -Allowing prompt grasping and supplementing at the occurrence of any error of individual module -Power produced by individual module is converted into data – enables verification of quality 페이지 7 (그림) [Central inverter system] Existing central inverter is the system that transmits power in such a manner of transmitting DC power produced in several panels to a single inverter and converting it into AC in the inverter. This method is operated by inverter-level monitoring, and has disadvantage that the error should be checked for a multiple number of panels connected with a single inverter at the occurrence of trouble on the specific panel. (그림) DC connection box – inverter – AC – AC distribution panel board – Building Monitoring [i-Sun Microinverter System] ‘i-Sun Microinverter is the system that directly supplies AC power from the individual panel as the solar PV panel integrated type inverter. This is the method of monitoring system operation type at the individual panel level, which enables to quickly grasp and supplement the trouble of specific panel, and therefore may greatly reduce loss of power production compared with the existing central inverter. In addition, this method is simple in the power transmission process, which may prevent the drop in the system efficiency caused by miss match. AC – AC distribution panel board – Building Monitoring Power production improvement effect Item 3kWp 102kWp Yearly amount of generation during 3,942 134,028 Remark normal operation Loss from miss Existing 181.3 6,165.3 Applying 4.6% match i-Sun 0 0 as the loss rate of miss match Loss from Existing 75.6 1,377 Based on the i-Sun 5.4 5.4 occurrence of shade shade 15 (Christmas light days effect) for one specific occurrence the of for per year module Loss following the difference of A/S period Existing 32.4 2,570 In case of i-Sun, i-Sun 1.4 4.4 A/S period reduction standard is - 3kW (1 day), 102kW (3 days). But calculated at 0.13 and 0.012 days based on non-operation of 2 modules. Loss from DC cable Existing 74.9 2,546.5 Applying 1.9% i-Sun 0 0 as the loss from DC cable (Sub total) Yearly actual amount of Existing (364.2) (12,665.8) i-Sun (6.8) (9.8) Existing 3,577.8 121,362.2 Larger i-Sun 3.935.23 134,018.2 reduces generation capacity more loss rate. Shorten the replacement time inverter when has trouble. (좌측 그림) 1) What is miss match? Loss that maximum output of solar PV module connected in direct and parallel series becomes smaller than the sum of module output measured under the same condition caused by irregularity of voltage/current feature following the change in the environment and load condition PV array changes in i-v characteristic curve depending on the environmental change and load condition. a) Loss occurring in case of deviating from MPP point b) Loss following the MPP control error of PCS 2) Christmas light effect? Phenomenon that the elements affecting the module efficiency (dust, debris, shade, etc.) influences on the other modules arranged in a series. (그림) Existing central type (그림) i-Sun microinverter -Influencing on the entire module within the same PCS - Influencing on the applicable module only 3) What is DC cable loss? Loss of power that occurs for the DC electricity produced in the PV module until it enters into the inverter in the cable Page 8 ‘i-Sun Monitoring Existing photovoltaic system indicates only the data output from the inverter regarding the error occurring in each component of solar PV module, inverter and connection box, which disables prior recognition of the entire system troubles resulting in the loss of amount of generation. ‘i-Sun Monitoring enables complimentary action through diagnosis of operating status by individual module in order to improve such problems. 1st generation type 2nd generation type 3rd generation type Existing inverter type Existing inverter type i-Sun monitoring method monitoring method monitoring method -Simple -Array-wise -Module-wise method monitoring method monitoring method -Cabled -Cabled -RS485 monitoring communication Amount of line communication line Microinverter -PLC/WiFi method (inverter-RTU) (inverter-RTU) method method v v v v v V V v generation Weather condition Array-wise module monitoring Individual module V monitoring Feature -Measuring current/voltage of photovoltaic power plants -Checking the error by solar PV modules and inverter, connection box -Issuing periodical report for operation particulars of photovoltaic power plants (hourly, daily, weekly, monthly and yearly) -Enhancing the reliance of photovoltaic power plants data and securing maintenance of optimized system -Comparison and analysis of mutual operation through analyzing PCS and connection box synchronization data -Secure of the reliance of generation facility and duration of program (Maintenance of preciseness of data for long time) -Web Monitoring function: Monitoring on line after connecting through internet web -Smart Grid and Green IT linking function -SMS function: Able to cope with the trouble immediately through mobile message at the occurrence of any error in the photovoltaic power plant -Enables to build integrated monitoring system with the other new & renewable energy source -Minimizes the loss of the amount of generation of the power plant -Maximizes the entire efficiency of power generating facility -Extends the life of power generating facility through operation of optimized maintenance [Chart & Graph] -Module/inverter ID information - Connection box information: DC voltage, summing current, internal temperature of the connection box - Information by modules - Information of inverter - Information of the amount of generation - Information of CO2 mitigation amount - Selection of information by components (indicated in graph and table) - Real time information by module - Real time information of inverter - Real time information of atmosphere/surface temperature - Real time and accumulated amount of generation information [Alert] -Grasps troubles on the entire system and generating system - Level, alerting data, alerting time, alerting contents – current and past information function [Report & Download] -Hourly/daily/weekly/yearly reports -Module-wise report -Inverter information report -Past information by modules - Past information of inverter (우측 그림) Change in module color following the amount of output Diagnosis of module-wise operation status!! Data transmission method of i-Sun Microinverter Monitoring System Method Existing RS-485 Transmission Transmission method distance -Serial Approx. 1 km Characteristic -Requiring the communication installation of a method separate that externally transmits communication data line bit in one bit unit i-Sun PLC/WiFi -Through PLC -Data is communication transferred chip enclosed in through a cable the line on a real- individual microinverter, time basis data is without the transferred to necessity of data information installing a collecting device separate of i-Sun Station communication / transferred to line. web using 485 WiFi method ‘i-Sun Station ‘i-Sun Station is the system that monitors operation status and error status of photovoltaic system with i-sun inverter mounted on by modules on a real-time basis and transfers them to the central server. Feature -Data gathering by modules/inverters (Current amount of generation, accumulated amount of generation, input, output) -Grasps the amount of power of photovoltaic power plants produced in the individual module -Checks the failure of individual solar PV module and i-Sun Micorinverter -Grasps electrical feature of solar cell panel installed. [Utilization effect] -Checks the failure of module and i-Sun Microinverter through remote control -Quick after service 페이지 10 History 2014 -Acquired the qualification of new & renewable energy equipment supplier with microinverter (Korea Energy Management Corp. ) -Selected as the High Seoul Brand Enterprise 2013 -Under Industry-Academy Joint Research Development on high-efficiency (15% or more) solar cell electronic material (5 universities) -Received screening inspection on the microinverter plant conducted by Korea Energy Management Corp. -Registered the patents for hetero battery type power storage system and solar PV Street light using the said technology -Acquired Q-Mark for grid tie photovoltaic system -Awarded the citation from the head of Supply Administration (for contribution to MAS activation) -Entered into a supply agreement with the Supply Administration on distribution board, distribution panel board purpose motor control board -Acquired high-efficiency energy equipment/material certification for LED lighting fixture 2012 -Acquired UL, CED, and TUV for photovoltaic module -Selected as an excellent solar PV enterprise by the Mayor of Seoul City -Designated as A/S provider for new & renewable energy facility (solar PV field) -Selected as the best supplier in delivery and satisfaction as result of evaluation -Ranked as the 1st supplier in the performance -Entered into the supply agreement on distribution board -Performed KEMCO photovoltaic system project 2011 -Built a plant in Chuncheon Industrial Complex -Acquired the patent for high frequency resonant power conversion system (PCS) - Acquired the patent for integrated type photovoltaic system equipped with microinverter - Acquired the patent for AC type solar cell module equipped with improved output performance of photovoltaic system - Performed KEMCO photovoltaic system project 2010 -Move the workplace of head office (Seoul Forest Kolon Digital Tower) -Applied the patent for PV energy hybrid type module (radiation & conduction) -Selected as 2018 Pyeongchang Low Carbon Winter Olympic Consulting Enterprise - Performed KEMCO photovoltaic system project 2009 -Registered the E&H Affiliated Research Institute (Korea Institute for Advancement of Technology) -Registered GS certification for solar PV monitoring system (i-Sun) -Built photovoltaic power plants in the golf course for the first time in Korea (Arigi CC 200kWp) - Performed KEMCO photovoltaic system project 2008 -Changed the company name into E&H Co., Ltd. -Selected as eco-friendly construction material in BIPV field by Gyeonghyang Housing -Joined the Korea new & renewable energy Association -Jointly operated the photovoltaic power plants in the ‘Green Start Hanmaeum’ event of the Ministry of Environment -Jointly performed the technical road map for thin film solar cell development with KISTI -Installed Korea’s largest scale BIPV power generation system (Garden Five Ga/Da blocks 600 kWp) - Performed KEMCO photovoltaic system project 2007 -Entered into a supply agreement in photovoltaic system with the Supply Administration -Selected as an excellent enterprise in energy saving initiation by the Mayor of Seoul City -Selected as an excellent construction hosted by KEMCO (KIA Motor Service Center) -Registered as BIPV supplier to LG Chemical Co., Ltd. -Registered as R&D exclusive department (Korea Institute for Advancement of Technology) -Selected/Registered as Inno-Biz enterprise -Performed KEMCO photovoltaic system project 2006 -Registered as venture enterprise -Jointly developed solar PV technology with Korea Institute of Energy Research (2006~2009/PV system optimization performance improving technology) -Performed KEMCO photovoltaic system project 2005 -Participate in Industry-Academy Cluster Joint Technology by Seoul Strategic Energy Business Group (2005~2007/Sejong University, KISTI, Ceramic Industry Research Institute, E&H) -Performed KEMCO photovoltaic system project 2004 -Acquired ISO 9001: 2000 & KSA 9001: 2001 (TUV) -Participate in PV system demonstration research project in the Chosun University Dormitory Complex construction project -Performed KEMCO photovoltaic system project 2003 -Performed the government’s model distribution of solar PV power generation 2002 -Performed the government’s model distribution of solar PV generation 2000 -Participate in photovoltaic system (Gwangju Demonstration Research Project) -Built CCTV-purpose photovoltaic system on the expressway 1999 -Built the power source for metrological observation equipment using solar power 1997 -Sold OEM product under partnership with SOLE, Greece. 1996 -Built solar power structure for the first time in Korea 1991 - Sold OEM product under partnership with M.G.I, U.S.A (Fuel saver) 1988 -Selected as excellent equipment/material in the Energy Exhibition hosted by Ministry of Energy and Resources 1986 -Selected as ‘Promising Enterprise’ by the Energy Resources Research Institute -Received a letter of thanks for cooperation with energy consumption saving policy from the government 1985 - Sold OEM product under partnership with Geordano, France 1983 -Built a solar heat cooling/heating system in the Korea Energy Management Corp. building 1978 -Awarded the excellence award at the 1st Energy Exhibition 1977 - Ray Pak is selected as No. 1 excellent product - developed by localization and exported to U.S.A 1973 Found the company in the name of Korea Solar Energy Co., Ltd. Page 11 E&H is specialized in new and renewable energy having installed and carried out approx. 2,000 projects at home and abroad. (그림) -Garden Five (TOOL) 252kW –Matsumoto Nagano-ken Japan 786.24kW -Songcheon High School, Incheon 60kW -National Institute for Scientific Investigation (Gyeongbuk Branch) 100kW –Nagano-ken Dakasiki Japan 442.46kW -Gwanmun Gym, Gwacheon 100kW -Sindonga Familie Apt (Haengsin-dong Goyang) 50kW Page 12 Specification Item Input Output Specification Change in solar cell voltage 22~56 Vdc SCOPE OF MPPT VOLTAGE 22~50 Vdc Max. input current 12A Controlling method MPPT Rated capacity 300W Rated voltage/current Grid voltage (AC 220V/1.4A) Output 50Hz/60Hz (Sync operation frequency/Variation rate with grid line) Constant 1 phase 2 wires Power factor 0.95 or more Current distortion factor Comprehensive 5% or more Individual 3% or less Controlling method Prevention of PWM method isolated Within 0.5 second operation Overload 110% Efficiency 93% or more Cooling method Natural cooling Protective structure IP 65 External dimension 239 x 191 x 54 mm Gross weight 2.7 kg External interface PLC communication (RS485 & TCP/IP) Monitoring terminal (option) I-Sun Station (RS485 & TCP/IP) Protecting function Inverter Input over voltage, output short circuit, over load, protection of microinverter being overheated, fuse short circuit grid Prevention of isolated operation, protection of grid over voltage/low protection of frequency/low voltage, grid over frequency, prevention of output short circuit, over load, over heat and DC output outflow Operating environment Ambient temperature -10 ~ 65 degree C Main storage temperature -20 ~ 65 degree C Ambient humidity Relative humidity 5~90% or less (Place where there is no due) Height/vibration 1,000m or less, 5.9m/sec2 (=0.6g) or less Ambient environment Where there is not corrosive gas, flammable gas, oil mist, dust, etc. Head Office: 701 27 Seongsuyi-ro 7-gil Seongdong-gu Seoul (Seoul Forest Kolon Digital Tower 2-cha) Tel) 02-323-3385 Fax) 02-323-7785 Plant: 30 2-gil Geodu Complex Dongnae-myeon Chuncheon Tel) 070-8633-2011 Fax) 033264-8823 [2페이지 카탈로그] Company focusing on environment and human E&H Co., Ltd. Solar Microinverter 300W class Do solar PV installation yourself (그림) “Can the power be produced with a plug on only??” … Ultra mini inverter that can be installed by anybody in a simple and easy way Feature Simple installation – Can be installed by non-professional / Starts generation with the system plugged only Simple expansion of capacity – Independently operated by panels; Increase of capacity can be made by addition of panel only Installation on narrow area – Can be installed on a narrow area such as parking lot, pagora, etc. Installation on public facility – Power can be generated with MIC built-in panel on the facility such as park street light, bus stop, etc. Stability – There is no DC voltage and arc Type -Slab type -Support type -Roof type Guarantees long life “i-Sun is the history and know-how of 40 year-long E&H Co., Ltd. in building the photovoltaic power plants . New & Renewable Energy Facility Certified (PV-GTI-1-0089) Head Office: 701 27 Seongsuyi-ro 7-gil Seongdong-gu Seoul (Seoul Forest Kolon Digital Tower 2-cha) Tel) 02-323-3385 Fax) 02-323-7785 Plant: 30 2-gil Geodu Complex Dongnae-myeon Chuncheon Tel) 070-8633-2011 Fax) 033264-8823 Increasing amount of generation but simplifying the installation!!! You may increase power generation efficiency up to 15% compared with the existing system. Microinverter is a new product that improves disadvantages of existing central type system. This method adopts one inverter per one solar light module. Modules can be freely added; it also increases power generation efficiency up to 15% compared with the existing system through the realization of MPPT of individual module and provides long life for more than 25 years through low voltage technology. “ i-Sun microinverter of E&H is an integrated panel ultra micro long life inverter that converts DC power into AC 220V in an individual module unit. Item Input Output Specification Change in solar cell voltage 22~56 Vdc SCOPE OF MPPT VOLTAGE 22~50 Vdc Max. input current 12A Controlling method MPPT Rated capacity 300W Rated voltage/current Grid voltage (AC 220V/1.4A) Output 50Hz/60Hz (Sync operation frequency/Variation rate with grid line) Constant 1 phase 2 wires Controlling method PWM method Prevention of isolated Within 0.5 second operation Overload 110% Efficiency 93% or more Cooling method Natural cooling Protective structure IP 65 External dimension 239 x 191 x 54 mm Protecting function Gross weight 2.7 kg Inverter Input over voltage, output short circuit, over load, protection of microinverter being overheated, fuse short circuit Grid Prevention of isolated operation, protection of grid over voltage/low protection of frequency/low voltage, grid over frequency, prevention of output short circuit, over load, over heat and DC output outflow Operating environment Ambient temperature -10 ~ 65 degree C Main storage temperature -20 ~ 65 degree C Ambient humidity Relative humidity 5~90% or less (Place where there is no due) External interface PLC communication (RS485 & TCP/IP) - Rate voltage and frequency: 20V 16A 60Hz - It exactly measures small stand-by power as well as power consumption. - It can be installed easily and used simply. With amount of generation gauge connected to the inverter, you can see amount of generation. Present voltage, present current, operating time, operating power, expected monthly power, present voltage (Error of measurement: within 0.2%) Head Office: 701 27 Seongsuyi-ro 7-gil Seongdong-gu Seoul (Seoul Forest Kolon Digital Tower 2-cha) Tel) 02-323-3385 Fax) 02-323-7785 Plant: 30 2-gil Geodu Complex Dongnae-myeon Chuncheon Tel) 070-8633-2011 Fax) 033264-8823 [4 페이지 카탈로그] Page 1 Discover the Difference SOLAR MICROINVERTER _300w Page 2 300W class 15-year warranty Easy Long Life Time Safe New & Renewable Energy ‘i-Sun microinverter is the most efficient microinverter in Korea, which is the product adopting the latest innovative technology maximizing the performance of photovoltaic system based on the 3rd-generation technology of E&H Co., Ltd. Module unit monitoring instead of the existing array typed monitoring system!! User can detect and manage the monitoring through web on a remote control system It judges the error of individual module, and enables removing the difficulty in A/S management and copes with trouble quickly. It realizes module-wise inverter mounting method, is easy in expanding the solar cell module, and simplifies the installation. In addition, it does not require any separate PCS space. i- Sun Microinverter System Microinverter being mounted on ‘each’ module. 1) 300W class small-size inverter i-Sun Microinverter 2) i-Sun Station 3) i-Sun Monitoring (2) i-Sun Station enables to monitor operation status and error status of photovoltaic system with i-Sun Microinverter mounted by modules on a real-time basis and transfer such data to the central server. -Communication method: PLC real-time communication -Data bus-bus communication method: RS485 or TCP/IP -Other function: Remote on/off control [Differentiation from existing product] -Grasps the amount of power generation of photovoltaic power plant that is produced in the individual module -Checks the failure of individual solar PV module and i-Sun Micorinverter -Grasps electrical feature of solar cell panel installed. [Utilization effect] -Checks the failure of module and i-Sun Microinverter through remote control -Quick after service (3) ‘i-Sun Monitoring, as the operation program that realizes remote monitoring through single or web in the place where photovoltaic system is built, is a comprehensive system that manages data collected through i-Sun Station. [Differentiation from existing product] -Grasps the amount of power generation of photovoltaic power plants that is produced in the individual module -Checks the failure of individual solar PV module and i-Sun Micorinverter -Grasps electrical feature of solar cell panel installed PAGE 3 You just think about the capacity of facility. You can design the capacity of facility for yourself as it doesn’t need construction of direct/parallel series separately for mini power plant in your veranda to medium-large size photovoltaic plant. central type(general system installation i-Sun installation method of E&H method) Installation Installation -Central type -Individual dispersion type -To be installed by professional -Can be mounted simply on PV module frame -Solar cell module can be expanded easily and its installation is easy -No need of separate DC wiring method and DC connection box Performance Performance -One module influences on the entire system -All the modules are the individual system by shade and -Output drop may occur following the therefore not influenced by environmental elements voltage drop in the shade area -Module that underwent the failure doesn’t [Influence on the entire module within the influence same PCS] therefore it maximizes power production on the ambient module, and -AC power is produced by individual module unit, and therefore prevents power loss by DC line. [Influence on the applicable module net] Safety Safety -Dangerous as it is connected to high- -Using low AC power rather than high- voltage DC voltage DC; Prevent the electric shock risk -Risk of fire caused by the occurrence of DC -No DC voltage; no arc arc -Module that influence on undertook the error ambient doesn’t module; maximizing the power production Warranty & A/S Warranty & A/S -5 year warranty/10 year duration -15 year warranty/25 year duration -Inverter error influences on the entire -Monitors individual module output resulting system in error-module interruption -Requiring shut-off of power of the entire system quality improvement effect system during maintenance Improves the system efficiency up to 15% compared with the existing system effect and