Download info... - Argyle Locomotive Works

Aster 1:32 scale
AD60 Garratt 4.8.4 + 4.8.4 as '6020'
The AD60 class were built by Beyer, Peacock and Company Manchester for the New
South Wales Government Railways in Australia. Built between 1952–1954 there
were 42 in the class carrying road numbers 6001 to 6042. The last one was retired in
March 1973, and 4 are preserved.
This model is serial number 43/70. It was professionally assembled, test fired only
and has full lining and working marker lamps. It is offered with a display case.
Specifications
Specifications are of the production models as published by the manufacturer.
 Scale/Gauge: 1/32, Gauge One (45mm)
 Livery: Un-lined, plain black.
 Total Weight: 10.83 kg (23.88lbs)
(Front Engine 3.04 kg. + Boiler 4.3 kg. + Rear Engine 3.49
kg.)
 Length: O.B 1, 044mm (41.1 inches)
 Width: 98mm (3.8 inches)
 Height: 136mm (5.35 inches)
 Driving Wheels: Dia. 43 mm Spoke Type, Equalized Spring
Action.
 Pilot Trucks: Dia. 29 mm Disk Type, Swing Bolster
 Trailing Trucks: Dia. 29 mm Disc Type
 Minimum Radius: 2 meters
 Cylinders: Walschaerts valve gear, 4 x Cylinders, Bore 12mm x
Stroke 20mm
 Boiler Type/Capacity: Locomotive Type / 320cc at 80 full
 Pressure: 4kg/cm2 at Normal Working
 Fittings: 3 x Safety Valves, 2 x Super Heater Tubes, Pressure
Gauge, Water Gauge, Blow Down Valve, Throttle Valve,
Blower Valve, Whistle, Two Axle Driven Pumps: Two Mounted
on the Trailing, 2 x By-Pass Valves
 Lubricators: 2 x Roscoe Displacement Type
 Burner: Convertible to either Coal or Alcohol
 Fire Bed Area: 43.8 CM2
 Fuel: Coal or Alcohol
 Water Tanks: Capacity 350 cc (front) + 250 cc (rear)
 Hand Operation Water Pump Mounted in the Front Tender
 Fuel Tank: Capacity 260 cc of alcohol
 Head & Rear Lamps: Battery Operation
The model has been protected from dust and is spotlessly presented inside this display case.