Download Instruction Manual

JUICER MIXER
GRINDER
Star/
Star DX
Instruction Manual
Dear Customer,
Congratulations! On the purchase of your INALSA Juicer Mixer Grinder,
this is designed to include many superior features that permit you the fullest
expression of your juicing skill and enthusiasm. You are now on the threshold
of a whole new world of juicing pleasure.
At INALSA, we have a reputation of manufacturing innovative, high quality
appliances such as Food Processors, Mixer Grinders, Juicer Mixer Grinders,
Cooking Ranges, Juice Extractors, Cooktops, Microwave Ovens, Oven
Toaster Grillers, Hand Blenders, Electric Kettles, Rice Cookers, and Electric
Chimneys. Your newly acquired INALSA Juicer Mixer Grinder bears the
same distinctive hallmark of excellence.
It is all the result of vigorous quality consciousness in INALSA's design and
development where uncompromising standards are maintained and rigid
quality control measures are exercised on raw materials, components and
finally, the finished product.
Your INALSA Juicer Mixer Grinder has a lot of thoughtful features built in
to make your juicing convenient. Please read these instructions carefully, so
that you may get the best out of the power packed features in your INALSA
Juicer Mixer Grinder.
Welcome to the INALSA world of juicing pleasure!!
1
Parts Identification
9
13
11
3
10
7
6
18
16
14
17
15
5
4
1
Part No.
8
2
Part Name
1.
Main Body
2.
Bottom
3.
Juicer cover
4.
Switch housing
5.
Switch buttons
6.
Swing locks
7.
Spout cover
8.
Bottom pads
9.
Food Pusher
10.
B.L jar
11.
B.L lid
12.
B.L socket
13.
B.L stopper
14.
D.G jar
15.
D.G socket
16.
D.G lid
17.
Chutney jar (Only with Star DX))
18.
Chutney jar lid (Only with Star DX)
2
12
Technical Specifications *
Model
Star
Star DX
Voltage
230V AC-50Hz.
230V AC-50Hz.
Power consumption
500 Watts
500 Watts
Rating
30 minutes continuous
Cord plug
2-pin, 6A, 250V, PVC 1.75 M long (approx )
Speed control
3 speed with pulse
No. of jars
Liquidizing jar,
Dry grinding jar
Liquidizing jar,
Dry grinding jar,
Chutney grinding jar
* Due to continuous improvements in product, specifications are subject to change without prior
notice.
Features
· 500W powerful motor
· On line pulp collector
· 1.5 litres liquidizing jar
· Large capacity stainless steel jars
· 3 speed with pulse
· Overload protector
3
Important Instructions
Do's
1. Before connecting the appliance check the mains voltage complies with
the voltage specified.
2. Clear out some space around the machine and keep juicer mixer grinder
away from direct heat and sun.
3. Ensure that the juicer cover is properly clamped to the juicer body before
starting the juicing operation.
4. During juicing operation always go for lower motor speeds for better
results.
Don'ts
1. Do not use fruits such as bananas & peaches that produce a thick paste
that can clog the juicer mesh.
2. For extracting the juice from citrus fruits like orange, mousmi etc. it is
advisable not to use the food pusher so that seeds pop out automatically.
For best results, it is advised to cut the fruits into two halves and remove
seeds before extracting the juice.
3. Do not feed large sized fruits into the feeder tube by force. This can
overload the motor and juicer mesh may get unbalanced.
4. Do not overload the motor.
5. Never lay a thin plastic sheet or cloth under the basic unit. It may get
sucked up and block the ventilation holes provided in the base.
6. Do not use any metal object, like knife etc. to clean juicer mesh as it may
get damaged.
7. Do not push fruits into the feeder tube by fingers while it is in operation.
If fruit become clogged in the feeder tube, use pusher to push it down. If
it doesn't work, turn OFF the motor, unplug the unit, then disassemble
the juicer cover to remove remaining food.
8. The filter mesh is very fine, precisely balanced component and it should
not be subjected to any undue pressure.
9. Do not attempt to repair the juicer at home or allow any unauthorized
person to do it either, in the event of juicer mixer grinder needing
attention take it to the nearest service centre.
4
Before First Use
1. After unpacking the unit and before any use, make sure the mechanical
parts of the unit and all its attachments are not damaged.
2. Wash the parts of the appliance, especially those comes into contact with
the fruits.
How to Use
Juicing
1. Always ensure that the supply voltage is in accordance with the rated
voltage. Before plugging into the power source make sure that the switch
is at OFF position and the mesh is securely placed with juicer cover
securely clamped on the juicer body by swing locks.
2. Wash fruits and vegetables and cut it into small pieces so that they can be
inserted into the feeder tube easily.
3. Plug in the unit. Use 1st speed for juicing. For short operation press the
speed control to pulse position. Place a container below the spout outlet
for collecting juice.
4. Insert the fruits into the feeder tube and press them down gently with the
help of food pusher.
5. Once the juicing operation is over, press the switch to “0” position and
unplug the unit
Blending
1. This jar can be used for liquidizing of fruit juices, soups, cocktails, milk
shakes, purees etc. the minimum capacity of the jar is 1/3 jar and
maximum capacity is 2/3 jar.
2. Fill the jar with the solids to be liquidized such as tomatoes. Fit the jar on
to the main unit.
3. Place the lid on the jar.
4. If needed water can be added. Now switch 'ON' the mixer for one minute
and you will get finally blended juices and purees.
Dry grinding
1. This jar can be used for grinding black pepper, roasted coffee seeds,
turmeric, coriander, red chilies etc. The jar should not be filled more than
½ of the total capacity.
2. Ensure that the jar is absolutely clean and dry.
5
3. Fill the jar with the ingredients. Place the lid on the top of the jar and fit
the jar on the main unit.
4. Grind at low speeds for about 15 seconds and then move to higher
speeds.
5. During turmeric grinding first break it into smaller pieces before starting
grinding operation.
How to use Chutney jar (only in star DX)
Function and Purpose
·
This jar can be used to grind small quantities of dhania, coconut, green
chilies, etc. and chutney grinding. The jar must be filled up to the blade
level. The jar should not be filled more than ½ of the jar capacity.
·
Put the ingredients into the chutney jar.
·
Add a small quantity of water during chutney grinding.
·
Put the lid on the top of the jar and fit the jar into the main unit.
·
Stir the ingredients if necessary during grinding.
·
The ingredients to be ground should not be too large. Cut/ break
ingredients into small pieces.
Caution
1. The juicer should not be used for the juicing of bananas, peaches that
produces a thick paste that can clog the juicer mesh.
2. For citrus fruits it is advisable not to use the food pusher so that seeds pop
out automatically. For best results, it is advisable to cut the fruits into two
halves and remove seeds before extracting the juice.
3. The juicer mesh is very fine and delicate, care should be taken not to
bend or damage it while cleaning.
Overload Protector
The Juicer Mixer Grinder is protected against the sudden overloads. In
case such a situation does occur, your Juicer Mixer Grinder will
automatically turn OFF. To restart the unit, please wait for 2-3 minutes
to allow the motor to cool down and also remove the cause of overload.
Press the button located at the bottom of the Juicer Mixer Grinder to
restart the unit.
6
Cleaning and Maintenance
How to clean juicer assembly
1. Make sure the juicer is at “OFF” position and the plug is disconnected
from outlet before putting on or taking off any part.
2. Release the swing lock downwards and lift the juicer cover.
3. Remove juicer mesh assembly by pulling it up from the base of the juicer
body, holding juicer body with both hands lift it up from the basic unit.
4. Remove spout cover and the juicer body. Remove the pulp collected in
the pulp collector of the juicer body.
5. Clean juicer mesh under the running water.
6. Motor must always be kept dry. Use a damp cloth to clean the motor
housing.
7. Do not use abrasive cleaners or scouring pads on the appliance.
8. Dry all parts.
9. Reassemble all parts in proper order and store the appliance in a dry
place.
How to clean Blender jar
1. Pour a little soap and water into the jar, close the lid and run it on the main
unit at 1st position. This dislodges the food particles lodged inside the jar.
2. Wipe the area along the blades with a cloth and then dry.
How to clean Dry grinding jar
After dry grinding, remove the contents and wipe the jar with a dry cloth.
How to clean Chutney grinding jar
·
Pour a little soap and water into the jar, close the lid and run it on the
main unit at 1st position. This dislodges the food particles lodged inside
the jar.
·
Remove the jar and pour out the soap solution and rinse with tap water.
·
Wipe the area along the blades with a wet cloth and then dry.
7