Download Custom Solutions Catalog

Survey
yes no Was this document useful for you?
   Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Document related concepts

Arecibo Observatory wikipedia , lookup

Hubble Space Telescope wikipedia , lookup

XMM-Newton wikipedia , lookup

Leibniz Institute for Astrophysics Potsdam wikipedia , lookup

Allen Telescope Array wikipedia , lookup

James Webb Space Telescope wikipedia , lookup

Spitzer Space Telescope wikipedia , lookup

International Ultraviolet Explorer wikipedia , lookup

Lovell Telescope wikipedia , lookup

Optical telescope wikipedia , lookup

Jodrell Bank Observatory wikipedia , lookup

Very Large Telescope wikipedia , lookup

Reflecting telescope wikipedia , lookup

CfA 1.2 m Millimeter-Wave Telescope wikipedia , lookup

Transcript
Custom Solutions Catalog
Prescription Corrected Solutions For Your Most Challenging Patients
 Prescription Corrected Eyewear
Page 2
Prescription Corrected Filters
Page 4
 Eschenbach Telescope Mounting
Page 7
 Designs For Vision Telescope Mounting
Eschenbach Optik of America, Inc.
22 Shelter Rock Lane, Danbury, CT 06810
Tel: (800) 487-5389
Fax: (888) 799-7200
Volume 10
Page 10
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
Prescription Corrected Eyewear
Eschenbach will custom correct prismatic or
microscopic eyewear for your patients based on
their individual needs. Sphere, cylinder, prism,
tints and other prescription enhancements are
available for your patient solutions.
Custom prismatic solutions are available in any of
3 frames:
 1681–X
Gold half-eye frame, 41mm,
Bridge 25mm, Temple 150mm
 B2204-X Gold full-field frame, 47mm,
Bridge 20mm, Temple 140mm
 B2702-X Pewter full-field frame, 46mm,
Bridge 20mm, Temple 145mm
B2702 Pewter Frame
B2204 Gold Frame
Custom corrected prismatic eyewear is available
in CR-39 lenses, with or without anti-reflection
coating in any of the frames listed above.
Custom microscopic solutions feature
ClearImageII® lenses from Designs for Vision,
Inc. and are available in:
 DVC-4521-xx-xx
1681-4122S Gold Frame
Eschenbach uses ClearImageII® lenses from
Designs for Vision, Inc. in all of our microscopic
solutions. Prescription lens correction as well as
lens tinting is available in the ClearImageII® lens
itself, and any lens correction as well as frosting
or occlusion is available for the balance.
LightSpecs are prescription correctable and
available in two unisex frame styles. Each pair
features 2 LEDs (one on each temple) that are
each individually activated and powered by two
flat button-sized batteries that last 50 hours!
DVC-4521-xx-xx
ClearImageII® Frame
Don’t compromise your patient’s vision. Give
them the customized solution they expect and
deserve!
Questions? Contact Eschenbach or your local
Territory Manager at (800) 487-5389.
2
LightSpecs
FGX-1011356-xxx
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
2012 Prescription Corrected Eyewear Order Form
Account Name: _________________________ Acct # _______
Patient’s Name: _______________________________
Address: _________________________________City: ________________________ State: ______
Name of Person Placing Order: _______________________________
Date: ____/____/____
B-2204-x
B-2702-x
1681-x
FGX-1011-xxx-xxx
(Lindy in Tortoise only)
Eschenbach
Premium Prism
Eyewear

No




New frame number
DVC-4521-xx-xx
Tortoise
Black


LightSpecs*
Require ‘edging’
charge. Call for quote
Lens Material (for
LightSpecs only)
2
Eschenbach
Microscopic Eyewear
Gold
Pewter
Gold Half-Eye
A/R Coated?
Yes
Phone: _______________
Email: ______________________________________________________________________
Product #
1
Fax: _____________
Zip: ___________
Distance Rx:
Eye
OD 
OS 
For Eschenbach
use only
PO:
SO:
Date:
Eschenbach Premium
Prismatic is
prescription corrected
in CR-39
Eschenbach Microscopic Eyewear with
ClearImageII® lenses are prescription
corrected in optical glass
Lens material (circle
specified):
Trivex;
one below, CR39 used if nothing is
Polycarb;
Mid Index;
Hi Index
Sphere
Cylinder
Axis
Dist PD
Sphere
Cylinder
Axis
Near PD
OD
OS
3
Low Vision Rx
desired:
OD
OS
Other:
4
Please choose one option below:
 Quote only
 Proceed with order
Signature
NOTE: Eschenbach will fax a firm quotation for all orders to the attention of the contact
person on the order form. Prices are subject to change. Orders will NOT be processed until
confirmation and authorization of the order is provided by the customer via phone (800-4875389) or return fax. Quotes do not include freight.
3
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
Prescription Corrected Filters (Wellness Protect)
In the visible light spectrum, blue light is the high energy, short wavelength light that can easily scatter as it crosses
through different media in the eye, thereby causing intra-ocular glare and reduction in contrast (i.e., the ability to
separate an object from its background). Eschenbach’s new Wellness Protect Eyewear blocks this bothersome blue light
thereby reducing intra-ocular glare, increasing contrast, and improving user’s viewing experience!
Wellness Protect Eyewear features yellow lenses that
protect the eyes by blocking light 470nm in wavelength
and less, cutting out most blue light. In addition, the
Wellness Protect Eyewear can be prescription corrected
and made in any of the standard filtering tints including
orange (525nm), amber (511nm), plum (400nm) or deep
red (550nm).
Frame provides side and top protection
Wellness Protect Eyewear features two styles (Original Brown and New Black) in two sizes, each providing
protection, comfort and style. The new frames feature adjustable nose pads that allow a better fit to your patient’s faces.
The Large Black frame features spring-hinged temples while the Small Black frame includes a gold metal accent around
the side shields for additional style.
The protection on both styles comes from shields on the top and bottom of the lens as well as from a custom made side
shield. Although providing excellent, full coverage, the shields still allow air to circulate freely avoiding the fogging that
can occur with more snugly fitting eyewear. And, since it is designed in Germany, the Wellness Protect Eyewear
naturally has European style.
Small Black Frame
Large Black Frame
All styles have side
shields which are
pre-tinted and are
not available for
other tinting
Original Brown
Frame – comes
in Small & Large
4
Original Brown
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
“Off-the Shelf” options available in 5 tints
Most eyewear that blocks 470nm light and less is bright yellow which may minimize its acceptance by users. To alleviate
this problem, Eschenbach’s Wellness Protect Eyewear includes one of 5 tints: a light 15% brown/yellow, a dark 65%
brown/yellow, a darker 75% brown/yellow (polarized), a darkest 85% brown/yellow, or a gradient that is 50% brown at
the top of the lens and decreases to 15% at the bottom of the lens. These tints give users a choice in how much overall
light they want to have blocked, and the gradient option provides the ability to block more light looking straight ahead,
and less light when looking down.
Light
(15% brown)
Dark
(65% brown)
Darker
(75% brown)
Polarized
Darkest
(85% brown)
Gradient
(50% - 15%
brown)
Other filtering tints also available for custom orders
Eschenbach can also make Wellness Protect Eyewear with the popular contrast-enhancing tints found in the SolarShield®
and SolarComfort® lines including yellow (450nm), orange (525nm), amber (511nm), gray (400nm), and plum (400nm).
You can also order a custom tint as well. See Order Form for details.
Yellow
(450nm)
Orange
(525nm)
Amber
(511nm)
Gray
(400nm)
Plum
(400nm)
Prescription Correctable
Wellness Protect Eyewear is available without tinted lenses so that you can offer a prescription corrected pair to your
patients while still getting the benefits of both fashionable frame styles and protective side shields.
Questions on prescription correcting the Wellness Protect Eyewear? Call us for a quote!
Small Brown Frame
w/ Side Shields
#1663-5416
(54mm x 16mm)
Large Brown Frame
w/ Side Shields
#1663-5716
(57mm x 16mm)
Small Black Frame
w/ Side Shields
#1663-5615
(56mm x 15mm)
Large Black Frame
w/ Side Shields
#1663-5816
(58mm x 16mm)
5
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
2012 Prescription Corrected Wellness Protect Order Form
Account Name: _________________________ Acct # _______
Patient’s Name: ______________________________________
Address: _________________________________City: ________________________ State: ______
Name of Person Placing Order: ________________________________ Fax: _________________
Date: ____/____/____
Zip: _________________
Phone: __________________
Email: _______________________________________________________________
Eschenbach Wellness Model Enclosed - OR - Eschenbach to supply (Circle one)
1
Large Brown Frame - 1663-5716
Large Black Frame - 1663-5816
OR My own frame:
2
Color
Eye Size ______
DBL __________
B
__________
ED __________
Small Black Frame - 1663-5615
Small Brown Frame - 1663-5416
Model
A) Color of tint requested (circle one below)
Wellness (Black/Brown/Yellow) Light (15%) Dark (65%) Darker (75%) Darkest (85%)
-ORB) Please tint as per your SolarShields:
Plum
Orange
Yellow
Amber Gray
-ORC) _________________________________ (Sample enclosed : Yes No)
Description of tint
Gradient (50/15%)
Percentage of light transmission? __________ (Not necessary if using an Eschenbach tint or enclosing sample)
3
For Eschenbach use
A) Polarized? Yes ___ No ___
only
If Yes, select/circle one of the following options: Yellow____ Brown #3____ Gray #3____ PO:
SO:
B) Anti-reflection coating? Yes ___ No ___
Date:
C) Lens material (circle one - CR39 used if nothing is specified)
Trivex
Polycarb
Mid Index
Hi Index
D) Special Instructions:
DIST
4
Add.
for Read
SPH.
R
L
R
L
Seg. Hgt.
R
L
PRISM
BASE
Dist. PD*
*(required)
mm.
Base Curve
Near PD
MRP
R
R
L
L
mm.
L
R
L
If you would like different options than the ones above, please ask. Eschenbach will try to
accommodate.
Please chose one option below:
6
AXIS
R
Bifocal
Style
5
CYL.
 Quote only
OR
 Proceed with order
Signature
Fax to: 888-799-7200 or
Email to: [email protected]
6
NOTE: Prices are subject to change. Orders will NOT be
processed until confirmation and authorization of the order is
provided by the customer via phone (800-487-5389) or return fax.
Quotes do not include freight charges.
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
Eschenbach Telescope Mounting
Mounting Telescopes – General Information
Eschenbach will mount telescopic solutions for your
patients on a custom basis as discussed below.
Practitioners should be advised that incomplete
information regarding mounting job specifications could
lead to delays in job completion and incorrect mounting.
Practitioners are expected to complete the mounting
order form fully for all jobs requested. Slight deviations
in telescope centering and height should be expected.
It is advised, therefore, that the frames selected to carry
the mounted telescope be rigid yet adjustable (wire with
double bridge, zyl with adjustable nose pads, end pieces
that allow pantoscopic and retroscopic angling, etc.) so
that final fitting can compensate for slight deviations.
Eschenbach’s 1693 frame is ideal as a telescope carrier
frame.
Eschenbach requires that finished eyewear be submitted
with mounting form for all jobs. If you are submitting
finished eyewear, you should have all necessary
markings intact, carrier lenses in place, and frames
comfortably adjusted prior to forwarding to Eschenbach.
CR-39 is the lens material of choice for carrier lenses.
Monocular telescope mounted
bioptically in superior position
Binocularly mounted 1673 telescope
in full diameter positioning
For bioptic telescope mounting, Eschenbach will mount
telescopes no closer than 3mm from the edge of the
spectacle frame (or 10mm down from top of lens to
center of scope).
For proper scope alignment, inclination or declination will
be incorporated at 2° per millimeter that the telescope is
centered above or below the distance pupil as marked.
Should you have any questions, contact Eschenbach or
your local Territory Manager at (800) 487-5389.
Monocular Telescope
Mounted in Inferior position
Monocularly mounted 1673 telescope in full
diameter position with reading cap
Monocularly mounted 1623 telescope in
full diameter position
7
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
Eschenbach Telescope Mounting
Instructions For Measuring And Marking For Custom-Mounted Telescopes
1. Binocular telescope mounting for distance
– Measure distance monocular pupillary distances for each
eye
– Using a lens marking pen/pencil, dot the pupils of each
eye at distance gaze (Major Reference Point – “MRP”)
– Determine height at which telescope will be mounted in
the spectacles, measuring from the bottom edge of the
lens to the center of the telescope (bioptic superior, full
diameter, bioptic inferior). If not specified, Eschenbach
will mount as high in the spectacle lens as possible.
2. Binocular telescope mounting for near
– Measure distance monocular pupillary distances for each
eye.
– Using a lens marking pen/pencil, dot the pupils of each
eye at distance gaze (MRP).
– Measure the distance from the spectacle lens to the object
to be viewed at eye level.
– Measure the linear distance from the spectacle lens to the
object to be viewed in the position the object is viewed.
– Where possible, using a lens marking pen/pencil, dot the
near pupils of the user when viewing the object. To
properly mark these pupils, the dispenser should position
his/her eye in the user’s line of sight at the object level,
looking up at spectacles of the wearer.
– To properly mark these pupils, the dispenser should
place loose-leaf reinforcements/leaf rings or other
removable adhesive rings over the near pupil markings
to ensure that the patient is viewing the near point
object through the center of the holes binocularly.
3. Monocular telescope mounting for distance
– Measure distance monocular pupillary distance for the eye
over which the telescope will be mounted.
– Using a lens marking pen/pencil, dot the pupil of the
eye over which the telescope will be mounted, at
distance gaze (MRP).
– Determine the height at which the telescope will be
mounted in the spectacles, measuring from the bottom
edge of the lens to the center of the telescope (bioptic
superior, full diameter, bioptic inferior). If not specified,
Eschenbach will mount as high in the spectacle lens as
possible.
8
1622-5 2.5x Galilean Telescope
1693 Frame
1673 Keplerian Telescopes
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
2012 Eschenbach Telescope Mounting Order Form
Account Name: _________________________ Acct # _______
Name of Person Placing Order: ________________________________ Fax: _________________
Eschenbach Telescope Model #
2
Telescope in which eye: (circle)
Phone: __________________
OD
Enclosed OR Eschenbach to supply
(Please circle one of the above)
OS
OU
Mounting Position: (circle)
Full diameter
(on center, aim straight)
OR
Superior Bioptic
*Pupil Center Height: R_______
L_______
*Monocular Dist. PD: R_______
L_______
*Required fields
Inferior Bioptic
On Full diameter TS: Please consider scope may partially occlude a portion of bifocal
SPH.
CYL.
AXIS
PRISM BASE
DIST
4
Add.
for Read
R
L
R
L
Bifocal
Style
Seg. Hgt.
R
L
Telescope Rx:
OD: _____________________________
OS: _____________________________
6
Dist. PD*
*(required)
R
mm.
Base Curve
R
R
L
L
mm.
AR Coated on Rx to
telescope?
Yes
No (Circle one)
L
Near PD
MRP
R
Carrier Lens: Plano unless specified
Please circle if desired*: Anti-reflection Coating: Yes_____ No____
Trivex
Polycarb
Mid
Index
1.60
1.67
Transition III Lenses? Yes ___ No___ If yes, circle Brown or Gray.
Special Instructions:
5
Zip: __________
Email:_______________________________________________________________________
1
3
PO:
SO:
Date:
Patient’s Name: ______________________________
Address: _________________________________City: ________________________ State: ______
Date: ____/____/____
For Eschenbach
use only
L
[*CR-39 used
if nothing is specified]
We can also Rx the telescopic
systems below:
1634-xx, 1636-xx
Frame from Eschenbach #1693 – Matte Silver (circle)
All sizes are supplied with 150mm temples. You can reduce them to 135mm by bending.
49-16
52-18
51-16
Other (Enclose other frame with order if desired)
Frame Name: _________________________________________ Color: __________________ Size: _____________
7
8
Accessories:
Reading Cap Power: ______________________
Please let us know the end use for this telescope mounting - Optional, but will help lab evaluate job:
Please chose one option:
 Quote only
9
 Proceed with order
Signature
Fax to: 888-799-7200 or
Email: [email protected]
9
NOTE: Prices are subject to change. Orders will NOT be
processed until confirmation and authorization of the order is
provided by the customer via phone (800-487-5389) or return
fax. Quotes do not include freight.
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
Designs for Vision Telescope Mounting
Mounting Telescopes - General Information
Designs for Vision Full Diameter, Bio I and Bio II
Galilean Telescopes
Designs for Vision Bioptic Telescopes are generally mounted in
the carrier lens so that the optic center of the ocular lens is
11mm below the top of the carrier lens. They are laterally
decentered to the patient’s PD and have a standard drilling
angle of inclination of 20º upward from the horizontal plane.
Any position or angle, however, can be special-ordered.
Bioptics can be ordered in clear, beige or black housing - this
must be specified on the order blank.
When using a bifocal carrier lens, care must be taken in the
placement of the bifocal segment. This is not as important if
the patient is going to be using only the telescope and the
bifocal segment, but if the patient is to be able to see at a
distance through the carrier lens, at least 8 - 10mm should be
available between the telescope and the top of the bifocal.
Thus, a frame with adequate vertical dimension must be
chosen for the patient. The Eschenbach #1693 frame is ideally
suited for this purpose.
DVI Telescope Kit
When binocular telescopes are prescribed, a reading cap may
be used only monocularly, since the telescopes will not be
aligned for the near working distance. The cap is generally
placed over the eye with the better acuity, or in the case of
equal acuities, over the dominant eye.
Designs for Vision Spiral Galilean Telescopes
The Spiral Galilean Telescope was designed to provide
focusability in a Galilean Telescope. The ability to focus these
telescopes without the need of reading caps provides a
flexibility in Galilean design not previously available. All of the
Spiral Galilean Telescopes allow the patient to focus from a
near point of 12 inches to infinity.
Fitting
All of the Spiral Galilean Telescopes can be fitted in either the
full diameter on center position or in the bioptic position
mounted as high as possible above the geometric center of the
frame. As the diameter of the eye pieces of the Spiral Galilean
Telescopes differ, height placement of the system selected,
e.g., 2.2X, 3.0X or 4.0X must be checked by the doctor with
the individual patient.
The patient’s distance prescription can be incorporated into
either the telescope, the carrier lens, or both. For best results,
it is recommended that this be done. It should also be noted
that a bifocal carrier lens can be prescribed for the patient.
The telescopic units can be supplied with either a clear, black,
or beige colored housing. For patients with a glare or light
sensitivity problem, a tint may also be incorporated into the
carrier, the telescope, or both.
10
DVI Full Diameter Telescope
DVI Spiral Galilean Telescope
Example of a Telescope Mounted Bioptically
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
2012 Designs for Vision Telescope Mounting Order Form
Account Name: _________________________ Acct # _______
Patient’s Name: ______________________________________
Address: _________________________________City: ________________________ State: ______
Name of Person Placing Order: _________________________________ Fax: _________________
Date: ____/____/____
Zip: _________________
Phone: ________________
Email Address:________________________________________________________________________
Magnification, Telescope Type: (circle)
1
2
Fixed Focus (circle)
Adjustable Focus (circle)
2.2X Full Diameter
2.2X Galilean Spiral
2.2X Bioptic Model I
3.0X Galilean Spiral
2.2X Bioptic Model II
4.0X Galilean Spiral
OD
OS
Binocular Dist. PD:
OR
*Monocular Dist. PD: R
(*Required Field)
OU
Mounting Position: (circle)
4
PO:
SO:
Date:
Housing Color: (circle)
Beige [Beige housing matches the color of the Eschenbach #1693 matte silver frame]
Black
Telescope in which eye: (circle)
3
For Eschenbach
use only
Full Diameter
_
Reverse Telescope:
Available in Black
only
L
Bioptic
(11mm down from top, angled up)
(on center, aim straight)
On Full diameter TS: Bifocal not available.
5
DIST
Add.
For Read
R
L
R
L
SPH.
CYL.
AXIS
PRISM
BASE
Dist. PD*
*(required)
R
Seg. Hgt.
R
Base Curve
R
L
mm.
L
L
Bifocal
mm.
Style
Please circle if desired*: Anti-reflection Coating? Yes____ No ____
Carrier Lens is Plano unless specified.
Polycarb – Trivex – Hi Index
Transition III lenses: check one color: Gray ______ Brown ______
Special Instructions:
FORM CONTINUES ON NEXT PAGE
11
Near PD
MRP
R
L
R
L
Tel: (800) 487-5389
Fax: (888) 799-7200
[email protected]
2012 Designs for Vision Telescope Mounting Order Form (cont.)
Telescope Rx:
6
Reverse Telescope?
Yes____
No____
OD:
OS:
Frame from Eschenbach #1693 - Matte Silver (Circle)
All sizes are supplied with 150mm temples. You can reduce them to 135mm by bending.
7
49-16
51-16
52-18
Other (Enclose other frame with order if desired)
Frame Name:
Accessories:
8
Color:
Size:
Reading Cap Power:
Additional Comments:
9
10
Please let us know the end use for this telescope mounting - Optional, but will help lab evaluate job:
Please choose one option below:
11
 Quote only
 Proceed with order
Signature
Fax BOTH PAGES to: (888) 799-7200
Questions? Call us at (800) 487-5389
OR
Email: [email protected]
NOTE: Eschenbach will fax a firm quotation for all orders to the attention of the contact
person on the order form. Prices are subject to change. Orders will NOT be processed
until confirmation and authorization of the order is provided by the customer via phone
(800-487-5389) or return fax. Quotes do not include freight.
12