Download The Power of Collaboration Working for You

The Power of Collaboration
Working for You
PartnerNetwork™ Solutions from Rockwell Automation
Dialight Lighting Controls System
LED lighting that communicates over
Ethernet/IP protocol.
• Simplify maintenance for your facility
• Control dimming grouping
and scheduling
• 1756 ControlLogix
• 1769/1768 CompactLogix System
Overview
Dialight’s advanced lighting controls can be tightly integrated with other systems within a facility, allowing site managers
to consolidate control systems and simplify maintenance procedures via our built-in support for EtherNet/IP (EIP)
networking and the Common Industrial Protocol (CIP). By integrating with Rockwell Automation, users have access
to the advanced features of Dialight’s lighting network controls and can create their own logic and control systems to
manage Dialight’s advanced controls, using Dialight sensors and system status messages as input.
Company Profile
Dialight delivers the most reliable and energy efficient LED lighting
solutions available. This translates into the greatest energy and
maintenance cost savings available to those industrial customers whose
usage and operating environment place a demanding burden on lighting
systems. Additionally, this gives Dialight access to deliver the highest
quality of lighting to, and integrate as a key information node in, its
customers operations.
Industries
Dialight delivers the most energy efficient, reliable, LED lighting solutions
available to those industrial customers whose usage and operating
environment place a demanding burden on lighting systems. Our primary
focus is heavy industrial and hazardous locations. We also manufacture
indicator and traffic lighting.
Applications
Dialight lighting and controls products are essential in variety of
industrial and hazardous applications including (but not limited to):
automotive, chemical/pharmaceutical, food and beverage, government/
military, heavy industrial, infrastructure, mining, oil gas & petrochemical,
power generation, pulp, paper & packaging, telecom, water & sewage,
and wind.
“We help facilities upgrade with ease to more efficient and economical
lighting with a fixture and controls partner they can trust.”
Michael Sutsko, Dialight’s Group Chief Executive
Core Services
With built-in support for industry standard EtherNet/IP (EIP) networking and the
Common Industrial Protocol (CIP), Dialight’s Vigilant High Bay, used in conjunction
with our advanced controls, including our gateway, can be tightly integrated with
other systems within a facility, allowing site managers to consolidate control systems
and simplify maintenance procedures.
• Instant on/off
• Dimming and occupancy sensing
• Automated Demand Response
Products
Used in conjunction with the Wireless Vigilant®LED High Bay, the lighting controls system
includes key products to complete your system. The high bay gateway allows you to
control up to 100 endpoints/nodes (i.e. lights/sensors). Additional essentials include:
• Dialight Architecture Controls System (DACS) - Ethernet/CIP adopter that enables
communication between the Dialight PLC and the Rockwell Automation architecture
• Daylight Harvesting Sensor - automatically adjusts LED lighting output based on
measured available daylight.
• Wireless Occupancy Sensor - switches lights from off to on or from a dimmed state to
on when motion is detected
What is DACS with ADR?
The DACS device-to-enterprise software provides a plug-and-play system that enables
access and precise control over fixture-level output to monitor and adjust settings on
every gateway, sensor and device in every zone, across an entire facility or corporate
network. Users can access the DACS dashboard using any computer, tablet or
smartphone to see system-wide or fixture-level status, view lighting performance data
and set up schedules and rules for any light, device or zone anywhere in the network.
Users can even configure instant notifications to receive alerts via email or SMS text for
critical fixture or group failures and other events.
With DACS’s built-in ADR (Automated Demand Response) system, companies can take
advantage of utility provider incentives for participation in demand response programs
by configuring DACS to automatically adjust fixture output to lower consumption
during peak demand with minimal impact on operations or productivity.
The system uses the OpenADR 2.0 standard, allowing facilities to pre-negotiate
load-shedding terms with utility providers and adjust lighting to Level I, II and III
forced reduction demands automatically. For example, customers can choose to dim
all lights by 20 percent to meet Level I demand, turn off every third light in a zone to
meet Level II, or shut down every light in an unoccupied area, if necessary, for Level III.
The adjustments happen automatically, and configurations are completely customizable
through the DACS dashboard to ensure forced demand response compliance with
minimal impact on facility operations and production.
The PartnerNetwork program is a framework of well-managed relationships formed as a result of customer need. It provides
manufacturers with access to a local, regional and worldwide network of best-in-class suppliers. These specialists offer the
industry experience and technological know-how to help solve business challenges both large and small.
Through the PartnerNetwork program, Rockwell Automation delivers a wide array of solutions, easier access to knowledge
and consistent delivery of solutions to help improve our customer’s business results.
How Dialight can help users cut energy waste
The Dialight Daylight Harvesting Sensor allows users to dynamically adjust to changing ambient daylight to dim and
brighten lights based on user-selectable lumen levels to reduce energy use and cost while maintaining desired
footcandles on the floor. Users can fine tune the lighting level to meet their needs for each application or specific
location. Unlike conventional wired sensors that must be connected directly to the controlled fixture, the Dialight sensors
are equipped with 2.4 GHz IEEE 802.15.4 wireless mesh networking. This allows sensors to be placed anywhere to harvest
ambient light as desired, while controlling individual fixtures or groups of lights.
Rockwell Automation and PartnerNetwork companies collaborate to help
you develop an ongoing approach to plant-wide optimization, improve
your machine performance and achieve your sustainability objectives.
1501 RT 34
Farmingdale, NJ 07727
USA
Phone: 800-307-6245
Fax: 732-751-5778
www.dialight.com
Allen-Bradley, LISTEN. THINK. SOLVE., PartnerNetwork and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication ENCOMP-BR0034A-EN-P – April 2016
Copyright © 2016 Rockwell Automation, Inc. All Rights Reserved. Printed in XXX.