Download Square D® Clipsal® 360° PIR Occupancy Sensor

Square D Clipsal 360 °
PIR Occupancy Sensor
®
®
The Square D ® Clipsal ® 360° Indoor PIR Occupancy Sensor
combines a passive infrared receiver (PIR) for occupancy sensing
and a light-level sensor, into a small, highly versatile unit. The multisensor’s 2.8 inch face diameter makes it unobtrusive and ideally
suited for flush mounting on the ceiling.
This highly versatile sensor has a 360 degree field of view with an
effective coverage pattern of more than 800 feet, so it is ideally suited
for offices, copier rooms, closets, and restrooms. Multiple sensors
can be connected to the same C-Bus network to provide larger
coverage patterns.
Clipsal 360° PIR Occupancy Sensor
Configuration options include adjustable time delays for automatic
shut-off following a preset time period without detected motion and
an adjustable light-level sensor that can be set to automatically turn
off lights when ambient light levels are sufficient or turn on lights
when ambient light levels are insufficient.
Features









360˚ detection pattern, indoor use
Effective coverage area is more than 800 square feet when unit
is mounted 8 feet above the floor
Dual element detectors minimize false triggering
LEDs indicate movement detection and status of the IR receiver,
and the light-level sensor
Can control up to four scenes or group addresses that can be
individually scheduled
Adjustable light-level sensor with Sunrise/Sunset and clock
overrides
Attractive, low profile unit can be flush mounted on ceiling or
suspended from wall tiles where it is unobtrusive, with a face
diameter of only 2.8 inches
Non-volatile memory stores operating status for recovery from a
power outage
Receives data and power over a network. No power packs or line
voltage connections required
Distributed Intelligence


Compatible with all Clipsal devices and the Powerlink ®
NF3000G3C controller
Easily configured by using Learn Mode or the C-BusTM Toolkit
Software and a personal computer connected to the C-Bus
network
Specifications
360° PIR Occupancy Sensor
Field of view from top and side for occupancy
sensor mounted 8 ft above floor
Nominal Voltage
Requirements
15‑36 V DC @ 18 mA, drawn from the CBus network
Field of View
360˚
PIR Rated
Detection Field
Typically 800 sq. ft. (74 sq m) when sensor
is mounted 8 ft (2.4 m) above floor
Light-Level
Inhibit Threshold
Continuous from 0.1 footcandle (1 lux) to full
sunlight
Timer Delay
Range
0 sec to 18 hr
Number of Units
per Network
Use the C-Bus Calculator, a software utility,
to determine the total network current load
C-Bus
Connection
Two removable terminal blocks, requires
CAT 5 data cable
Status Indicator
LED can be configured to turn on when
movement is detected
Dimensions
4.1 in. (L) x 2.8 in. (W)
[103 mm (L) x 72 mm (W)]
Front view of Clipsal 360° PIR Occupancy Sensor
Weight
3.2 oz (91 g)
Mounting
•
•
•
•
Operating
Environment
• Indoor only
• 32˚F to 113˚F (0˚C to 45˚C)
• RH: 95%, noncondensing
Standards
• UL: Listed 916 Energy Management
Equipment
• CSA 22.2 Spec 205 Signal Equipment
• FCC: Part 15.101, Class B Digital Device
• EN61000-4-2 Immunity to ESD
Surface: Ceiling
Ht: 8 ft (2.4 m) above floor
Max. Ht: 12 ft (3.7 m) above floor
Min. Ceiling Thickness: 0.39 in. (10 mm)
Description
Catalog Number
Clipsal 360° PIR
Occupancy Sensor
SLC5753L
Side view of Clipsal 360° PIR Occupancy Sensor
Schneider Electric North American Operating Division
Document Number 1250HO0513
295 Tech Park Drive
Square D, the
logo, Clipsal, Powerlink, and C-Bus are trademarks or registered
LaVergne, TN 37086
trademarks of Schneider Elecric and/or its affiliates in the United States and/or other countries.
Tel: 1-888-squared
www.squaredlightingcontrol.com
1/06
© 2006 Schneider Electric. All Rights Reserved.
Order Information