Download X-Ray Main Disconnect Panel - Bevco Imaging Suite Controls

X‐Ray Main Disconnect Panel Application: Provides emergency shutdown, under voltage protection, overcurrent protection, OSHA Lock Out/Tag Out provisions, and serves as a local disconnect for the Diagnostic Imaging System. Optionally, the Main Disconnect Panel allows for an automatic reclosure after a power outage so the system can come back online without maintenance intervention. Also, the MDP can be ordered with integral Room Lighting and In‐Use Warning Light control. Advantages: 







Reduce installation time by providing a single‐point power connection Proven components and designs eliminate guesswork Standard configurations suitable for use in 25kA short‐circuit current rated (SCCR) power systems Standardized design and testing ensures high product quality and system reliability Includes installation and operation manual UL and cUL listed, labeled, and tested. Conforms to National Electric Code Surface or semi‐flush mounting High SCCR ratings and a variety of custom configurations are available. Please contact Bevco Imaging Suite Controls for consultation Configuration: © 2011 Bevco Engineering Company, Inc. Ordering Information: Nominal Dimensions Height Width Depth Basic Part Number Voltage Amperage XR480‐080‐BB 380/400/415/480 50/60 Hz 80 24" 15" 9" XR480‐110‐BB 380/400/415/480 50/60 Hz 110 30" 24" 9" XR480‐150‐BB 380/400/415/480 50/60 Hz 150 30" 24" 9" XR480‐225‐BB 380/400/415/480 50/60 Hz 225 30" 24" 9" Options: Suffix ‐BB ‐BA ‐BL ‐AL Description Basic Main Disconnect Panel Auto‐Reclosure option. The Basic Panel requires a technician to manually reset the panel following a power failure. This option automatically restores power to the equipment following a power loss. The system incorporates a brief delay before re‐energizing to allow for the incoming power to stabilize, reducing the potential for damage to sensitive electronic devices typically encountered when switching to generator power. Room Lighting and "In‐Use" Warning Light Control option. Fully integrated warning light operation directly from the disconnect panel along with two‐level control of the room lighting using a foot‐operated switch (included) Both Auto‐Reclosure and Room Lighting options as detailed above. Listed above are common options and configurations. A wide variety of potential combinations of voltage, short‐circuit current ratings, and amperage requirements can be accommodated. Please CONTACT US with your specific needs. Bevco Imaging Suite Controls
W222N5739 Miller Way, Sussex, WI 53089 Phone (262) 820‐2400 Fax (262) 820‐2599 www.bevcoisc.com © 2011 Bevco Engineering Company, Inc.