Download HMC361S8G(E) - Analog Devices

HMC361S8G / 361S8GE
v07.1114
FREQUENCY DIVIDERS & DETECTORS - SMT
4
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10 GHz
Typical Applications
Features
Prescaler for DC to X band PLL applications:
Ultra low SSB phase noise: -148 dBc/Hz
• Satellite communication systems
Wide bandwidth
• Fiber optic
Output power: 3 dBm
• Point-to-point and point-to-multi-point radios
Single DC supply: +5V
• VSAT
S8G SMT package
Functional Diagram
General Description
The HMC361S8G & HMC361S8GE are low noise
divide-by-2 static dividers with InGaP GaAs HBT
technology in 8 lead surface mount plastic packages. This device operates from DC (with a square
wave input) to 10 GHz input frequency with a single
+5V DC supply. The low additive SSB phase noise of
-148 dBc/Hz at 100 kHz offset helps the user maintain
good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc = 5V
Parameter
Input frequency
Input power range
Output power
Reverse leakage
SSB phase noise (100 kHz offset)
Output transition time
Supply current (Icc)
Conditions
Min.
Max.
Units
Sine wave input. [1] [2]
0.4
10
GHz
Fin = 0.4 GHz to 1 GHz
-5
+10
dBm
Fin = 1 GHz to 8 GHz
-15
+10
dBm
Fin = 8 GHz to 10 GHz
-10
+2
dBm
 Fin = 6 GHz
0
Fin = 10 GHz
-6
Typ.
3
dBm
dBm
Both RF outputs terminated
45
dB
Pin = 0 dBm, Fin = 6 GHz
-148
dBc/Hz
Pin = 0 dBm, Fout = 882 MHz
100
ps
83
mA
[1] Divider will operate down to near DC for square-wave input signal.
[2] For stable operation without an input signal, refer to Analog Devices Application Note, “Frequency Divider Operation & Compensation with
No Input Signal.”
4-1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
ForOne
price,Technology
delivery, and Way,
to place
orders: Analog
Devices, Inc.,
For isprice,
and for
toitsplace
Analog
Devices,
Norwood,
MA 02062
responsibility
assumeddelivery
by Analog Devices
use, nor orders:
for any infringements
of patents
or otherInc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
978-250-3343 tel • 978-250-3373 fax • Order online
www.analog.com/hittitemw
Phone:at781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks
are the propertysupport:
of their respective
owners. 978-250-3343Application
Application
Phone:
or [email protected]
HMC361S8G* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
DESIGN RESOURCES
View a parametric search of comparable parts.
• HMC361S8G Material Declaration
• PCN-PDN Information
EVALUATION KITS
• Quality And Reliability
• HMC361S8G Evaluation Board
• Symbols and Footprints
DOCUMENTATION
DISCUSSIONS
Data Sheet
View all HMC361S8G EngineerZone Discussions.
• HMC361S8G Data Sheet
SAMPLE AND BUY
TOOLS AND SIMULATIONS
Visit the product page to see pricing options.
• HMC361S8G S-Parameters
TECHNICAL SUPPORT
REFERENCE MATERIALS
Quality Documentation
Submit a technical question or find your regional support
number.
• HMC Legacy PCN: S## and S##E packages - Relocation of
pre-existing production equipment to new building
DOCUMENT FEEDBACK
• Package/Assembly Qualification Test Report: Plastic
Encapsulated SOIC (QTR: 02018 REV: 01)
Submit feedback for this data sheet.
• PCN: MS, QS, SOT, SOIC packages - Sn/Pb plating vendor
change
• Semiconductor Qualification Test Report: GaAs HBT-A
(QTR: 2013-00228)
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
HMC361S8G / 361S8GE
Input Sensitivity Window vs. Temperature
20
20
10
10
0
INPUT POWER (dBm)
INPUT POWER (dBm)
Input Sensitivity Window, T = 25 °C
Recommended
Operating Window
-10
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10 GHz
-20
0
Min Pin +25 C
Max Pin +25 C
Min Pin +85 C
Max Pin +85 C
Min Pin -40 C
Max Pin -40 C
-10
-20
-30
-30
0
1
2
3
4
5
6
7
8
9
10
11 12
13
0
1
2
3
5
6
7
8
9
10
11 12
13
Residual Phase Noise Performance,
Pin = 0 dBm, T = 25 °C
Output Power vs. Temperature
10
0
8
-20
+25 C
+85 C
-40 C
6
SSB PHASE NOISE (dBc/Hz)
OUTPUT POWER (dBm)
4
INPUT FREQUENCY (GHz)
INPUT FREQUENCY (GHz)
4
2
0
-2
-4
0
2
4
6
8
10
12
-40
-60
-80
-100
-120
-140
-160
2
10
14
3
4
10
INPUT FREQUENCY (GHz)
5
10
6
10
10
7
10
OFFSET FREQUENCY (Hz)
Output Harmonic Content,
Pin = 0 dBm, T = 25 °C
Reverse Leakage, Pin = 0 dBm, T = 25 °C
0
0
Pfeedthru
3rd Harmonic
-10
POWER LEVEL (dBm)
-10
OUTPUT LEVEL (dBm)
4
-20
-30
-40
-50
Both Output Ports Terminated
One Output Port Terminated
FREQUENCY DIVIDERS & DETECTORS - SMT
v07.1114
-20
-30
-40
-50
0
2
4
6
8
INPUT FREQUENCY (GHz)
10
12
0
2
4
6
8
10
12
14
INPUT FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
ForOne
price,Technology
delivery, and Way,
to place
orders: Analog
Devices, Inc.,
For isprice,
and for
toitsplace
Analog
Devices,
Norwood,
MA 02062
responsibility
assumeddelivery
by Analog Devices
use, nor orders:
for any infringements
of patents
or otherInc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
978-250-3343 tel • 978-250-3373 fax • Order online
www.analog.com/hittitemw
Phone:at781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks
are the propertysupport:
of their respective
owners. 978-250-3343Application
Application
Phone:
or [email protected]
4-2
HMC361S8G / 361S8GE
v07.1114
Absolute Maximum Ratings
500
300
AMPLITUDE (mV)
FREQUENCY DIVIDERS & DETECTORS - SMT
4
Output Voltage Waveform,
Pin = 0 dBm, Fout = 882 MHz, T = 25 °C
100
-100
-300
-500
22.7
23.1
23.5
23.9
24.3
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10 GHz
RF input (Vcc = +5V)
+13 dBm
Vcc
+5.5V
VLogic
Vcc -1.6V to Vcc -1.2V
Junction temperature (TJ)
135 °C
Continuous Pdiss (T = 85 °C)
(derate 15.9 mW/°C above 85 °C)
0.79 W
Thermal resistance (RTH)
(junction to ground paddle)
63 °C/W
Storage temperature
-65 °C to +150 °C
Operating temperature
-40 °C to +85 °C
24.7
TIME (nS)
Typical Supply Current vs. Vcc
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Vcc (V)
Icc (mA)
4.75
74
5.0
83
5.25
89
Note: Divider will operate over full voltage range shown above
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE.
5.ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC361S8G
Low stress injection molded plastic
Sn/Pb solder
MSL1
[1]
HMC361S8GE
RoHS-compliant low stress injection molded plastic
100% matte Sn
MSL1
[2]
Package Marking [3]
H361
XXXX
H361
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-digit lot number XXXX
4-3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
ForOne
price,Technology
delivery, and Way,
to place
orders: Analog
Devices, Inc.,
For isprice,
and for
toitsplace
Analog
Devices,
Norwood,
MA 02062
responsibility
assumeddelivery
by Analog Devices
use, nor orders:
for any infringements
of patents
or otherInc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
978-250-3343 tel • 978-250-3373 fax • Order online
www.analog.com/hittitemw
Phone:at781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks
are the propertysupport:
of their respective
owners. 978-250-3343Application
Application
Phone:
or [email protected]
HMC361S8G / 361S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10 GHz
Pin Description
Pin Number
Function
Description
1
OUT
Divided output 180° out of phase with pin 3
and must be DC blocked
2, 6
N/C
N/C or ground
3
OUT
Divided output, DC block required
4
VCC
Supply voltage 5V ± 0.25V.
5
IN
RF input must be DC blocked.
7
IN
RF input 180° out of phase with pin 5, DC block required for
differential operation or A/C ground for single ended applications
8
GND
Ground backside of package has exposed metal ground slug
which must be connected to ground.
Interface Schematic
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
ForOne
price,Technology
delivery, and Way,
to place
orders: Analog
Devices, Inc.,
For isprice,
and for
toitsplace
Analog
Devices,
Norwood,
MA 02062
responsibility
assumeddelivery
by Analog Devices
use, nor orders:
for any infringements
of patents
or otherInc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
978-250-3343 tel • 978-250-3373 fax • Order online
www.analog.com/hittitemw
Phone:at781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks
are the propertysupport:
of their respective
owners. 978-250-3343Application
Application
Phone:
or [email protected]
4
FREQUENCY DIVIDERS & DETECTORS - SMT
v07.1114
4-4
HMC361S8G / 361S8GE
v07.1114
FREQUENCY DIVIDERS & DETECTORS - SMT
4
Evaluation PCB
List of Materials for Evaluation PCB 104631 [1]
Item
Description
J1 - J3
PCB mount SMA RF connector
C1 - C4
100 pF capacitor, 0402 pkg.
C5
1000 pF capacitor, 0603 pkg.
C6
10 µF tantalum capacitor
U1
HMC361S8G / HMC361S8GE divide-by-2
PCB [2]
104627 eval board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit board material: Rogers 4350
4-5
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10 GHz
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ω impedance while the package ground
leads and backside ground slug should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available
from Hittite upon request. This evaluation board is
designed for single ended input testing. J2 and J3
provide differential output signals.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
ForOne
price,Technology
delivery, and Way,
to place
orders: Analog
Devices, Inc.,
For isprice,
and for
toitsplace
Analog
Devices,
Norwood,
MA 02062
responsibility
assumeddelivery
by Analog Devices
use, nor orders:
for any infringements
of patents
or otherInc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
978-250-3343 tel • 978-250-3373 fax • Order online
www.analog.com/hittitemw
Phone:at781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks
are the propertysupport:
of their respective
owners. 978-250-3343Application
Application
Phone:
or [email protected]
HMC361S8G / 361S8GE
v07.1114
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10 GHz
4
FREQUENCY DIVIDERS & DETECTORS - SMT
Application Circuit
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
ForOne
price,Technology
delivery, and Way,
to place
orders: Analog
Devices, Inc.,
For isprice,
and for
toitsplace
Analog
Devices,
Norwood,
MA 02062
responsibility
assumeddelivery
by Analog Devices
use, nor orders:
for any infringements
of patents
or otherInc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
978-250-3343 tel • 978-250-3373 fax • Order online
www.analog.com/hittitemw
Phone:at781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks
are the propertysupport:
of their respective
owners. 978-250-3343Application
Application
Phone:
or [email protected]
4-6